<abstract xmlns="http://www.w3.org/1999/xhtml"><p>A surrogate technique based on Gaussian Process (GP) is used for predicting quality of laser in case of laser welding process that may be supported by induction preheating. FEM-based solution of the problem is computationally expensive because it combines computation of 3D coupled nonlinear electromagnetic and temperature fields. The quality of laser welds is quantified with weld depth, which depends on a number of input parameters. The paper deals with two of them —thickness of the welded steel sheet and power of the laser beam. First, selected FEM simulations allow finding data describing the dependency between the two input parameters and weld depth. These data allow creating a surrogate model that is able to predict weld depth at any point close to the points where the results are known. The principal goal is to essentially save the computational time. The surrogate model also allows estimating prediction plausibility and running the full FEM calculation in cases where the prediction is not sufficiently accurate. The methodology is illustrated with a typical example whose results are discussed.</p></abstract>

A surrogate technique based on Gaussian Process (GP) is used for predicting quality of laser in case of laser welding process that may be supported by induction preheating. FEM-based solution of the problem is computationally expensive because it combines computation of 3D coupled nonlinear electromagnetic and temperature fields. The quality of laser welds is quantified with weld depth, which depends on a number of input parameters. The paper deals with two of them —thickness of the welded steel sheet and power of the laser beam. First, selected FEM simulations allow finding data describing the dependency between the two input parameters and weld depth. These data allow creating a surrogate model that is able to predict weld depth at any point close to the points where the results are known. The principal goal is to essentially save the computational time. The surrogate model also allows estimating prediction plausibility and running the full FEM calculation in cases where the prediction is not sufficiently accurate. The methodology is illustrated with a typical example whose results are discussed.

Estimation of laser weld parameters using surrogate modelling technique

Department of Theory of Electrical Engineering

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Estimation of laser weld parameters using surrogate modelling technique"}

A surrogate technique based on Gaussian Process (GP) is used for predicting quality of laser in case of laser welding process that may be supported by...

Estimation of laser weld parameters using surrogate modelling technique

Online veröffentlicht: 30. Mai 2018

Seitenbereich: 170 - 176

Eingereicht: 18. Jan. 2018

DOI: https://doi.org/10.2478/jee-2018-0021

Schlüsselwörter
laser welding, surrogate model, approximation, numerical analysis, temperature field, electromagnetic field

© 2018 Karel Pavlíček et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Estimation of laser weld parameters using surrogate modelling technique

Online veröffentlicht: 30. Mai 2018

Seitenbereich: 170 - 176

Eingereicht: 18. Jan. 2018

DOI: https://doi.org/10.2478/jee-2018-0021

Schlüsselwörterlaser welding, surrogate model, approximation, numerical analysis, temperature field, electromagnetic field

© 2018 Karel Pavlíček et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
laser welding, surrogate model, approximation, numerical analysis, temperature field, electromagnetic field