<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This research investigates the impact of thermal loads on reinforced concrete (RC) buildings in Saudi Arabia and how they behave on sloped terrain. The study analyzed the effects of different types of support systems (hinged and fixed supports) and strengthening systems (with and without bracings) using the software ETABS-V20. Ground + 9 typical floors frame RC models on sloped terrain subjected to seismic loads were used for the investigation. The dynamic analysis of the ETABS models was performed to evaluate the lateral displacement, storey drift, column shear forces, and base shear forces of the buildings. The study found that using a bracing system and fixed supports under seismic loads increases the model’s displacement and storey drift compared to models with hinged supports and no bracing system. The maximum shear forces values were also higher for models with bracing systems and fixed supports, while the minimum values were for models without bracing systems and with hinged supports.</p>
</abstract>

This research investigates the impact of thermal loads on reinforced concrete (RC) buildings in Saudi Arabia and how they behave on sloped terrain. The study analyzed the effects of different types of support systems (hinged and fixed supports) and strengthening systems (with and without bracings) using the software ETABS-V20. Ground + 9 typical floors frame RC models on sloped terrain subjected to seismic loads were used for the investigation. The dynamic analysis of the ETABS models was performed to evaluate the lateral displacement, storey drift, column shear forces, and base shear forces of the buildings. The study found that using a bracing system and fixed supports under seismic loads increases the model’s displacement and storey drift compared to models with hinged supports and no bracing system. The maximum shear forces values were also higher for models with bracing systems and fixed supports, while the minimum values were for models without bracing systems and with hinged supports.

Thermal Effect on the Design Loads of Multi-Storey RC Buildings on Sloped Terrain in Saudi Arabia

College of Engineering, University of Prince Mugrin

Department of Civil Engineering, Faculty of Engineering

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This research investigates the impact of thermal loads on reinforced concrete (RC) buildings in Saudi Arabia and how they behave on sloped terrain. The study...

Thermal Effect on the Design Loads of Multi-Storey RC Buildings on Sloped Terrain in Saudi Arabia

Online veröffentlicht: 14. Mai 2023

Seitenbereich: 83 - 90

Eingereicht: 28. Feb. 2023

Akzeptiert: 05. März 2023

DOI: https://doi.org/10.2478/jaes-2023-0011

Schlüsselwörter
Thermal and Seismic Loads, Sloped Terrain, Bracing, Response Spectrum Analysis, ETABS

© 2023 M. Y. Laissy et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Thermal Effect on the Design Loads of Multi-Storey RC Buildings on Sloped Terrain in Saudi Arabia

Online veröffentlicht: 14. Mai 2023

Seitenbereich: 83 - 90

Eingereicht: 28. Feb. 2023

Akzeptiert: 05. März 2023

DOI: https://doi.org/10.2478/jaes-2023-0011

SchlüsselwörterThermal and Seismic Loads, Sloped Terrain, Bracing, Response Spectrum Analysis, ETABS

© 2023 M. Y. Laissy et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Schlüsselwörter
Thermal and Seismic Loads, Sloped Terrain, Bracing, Response Spectrum Analysis, ETABS