[Ahmed, S.F.U., and Ronnie, Z. (2017). Ductile behavior of polyethylene fibre reinforced geopolymer composite: MATEC Web of Conferences, DOI: 10.1051/matecconf/20179701047.10.1051/matecconf/20179701047]Open DOISearch in Google Scholar
[Al-Tayyib, A.J., Al-Zahrani, M.M., R., and A., Al-Sulaimani, G.J. (1988). Effect of polypropylene fiber reinforcement on the properties of fresh and hardened concrete in the Arabian Gulf environment: Cement and Concrete Research, Vol. 18, No. 4, pp. 561–570.10.1016/0008-8846(88)90049-X]Search in Google Scholar
[Alhozaimy, A.M., Soroushian, P., and Mirza, F. (1996). Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials: Cement and Concrete Composites, Vol. 18, No. 2, pp. 85–92, DOI: 10.1016/0958-9465(95)00003-8.10.1016/0958-9465(95)00003-8]Open DOISearch in Google Scholar
[Alomayri, T., Shaikh, F.U.A., and Low, I.M. (2014). Synthesis and mechanical properties of cotton fabric reinforced geopolymer composites: Composites Part B: Engineering, Vol. 60, pp. 36–42, DOI: 10.1016/j.compositesb.2013.12.036.10.1016/j.compositesb.2013.12.036]Open DOISearch in Google Scholar
[Alzeer, M., and MacKenzie, K.J.D. (2012). Synthesis and mechanical properties of new fibre-reinforced composites of inorganic polymers with natural wool fibres: Journal of Materials Science, Vol. 47, No. 19, pp. 6958–6965, DOI: 10.1007/s10853-012-6644-3.10.1007/s10853-012-6644-3]Open DOISearch in Google Scholar
[Assaedi, H., Shaikh, F.U.A., and Low, I.M. (2016). Influence of mixing methods of nano silica on the microstructural and mechanical properties of flax fabric reinforced geopolymer composites: Construction and Building Materials, DOI: 10.1016/j.conbuildmat.2016.07.049.10.1016/j.conbuildmat.2016.07.049]Open DOISearch in Google Scholar
[ASTM C 1585 (2013). Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-: ASTM International, pp. 4–9, DOI: 10.1520/C1585-13.2.10.1520/C1585-13.2]Open DOISearch in Google Scholar
[ASTM C 469 (2014). ASTM C469/C469M-14: Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression: Annual Book of ASTM Standards, DOI: 10.1520/C0469.10.1520/0469]Open DOISearch in Google Scholar
[ASTM C293-02 (2002). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading): Annual Book of ASTM Standards, pp. 1–3, DOI: 10.1520/D1635.10.1520/D1635]Search in Google Scholar
[Aulia, T.B. (2002). “Effects of polypropylene fibers on the properties of high-strength concretes.” Institutes for Massivbau and Baustoffechnologi, University Leipzig, Lacer,, p. 7.]Search in Google Scholar
[Bagherzadeh, R., Pakravan, H.R., Sadeghi, A., Latifi, M., and Merati, A.A. (2012). An Investigation on Adding Polypropylene Fibers to Reinforce Lightweight Cement Composites (LWC): Journal of Engineered Fibers and Fabrics, Vol. 7, No. 4, pp. 13–21.10.1177/155892501200700410]Search in Google Scholar
[Banthia, N., and Gupta, R. (2006). Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete: Cement and Concrete Research, Vol. 36, pp. 1263–1267, DOI: 10.1016/j.cemconres.2006.01.010.10.1016/j.cemconres.2006.01.010]Open DOISearch in Google Scholar
[Bernal, S., De Gutierrez, R., Delvasto, S., and Rodriguez, E. (2010). Performance of an alkali-activated slag concrete reinforced with steel fibers: Construction and Building Materials, Vol. 24, No. 2, pp. 208–214, DOI: 10.1016/j.conbuildmat.2007.10.027.10.1016/j.conbuildmat.2007.10.027]Open DOISearch in Google Scholar
[BRE (2000). Constructing the future: Design Build. Davidovits, J. (2005). Geopolymers: Journal of Thermal Analysis, DOI: 10.1007/bf01912193.10.1007/bf01912193]Open DOISearch in Google Scholar
[Davidovits, J. (1991). Geopolymers - Inorganic polymeric new materials: Journal of Thermal Analysis, Vol. 37, No. 8, pp. 1633–1656, DOI: 10.1007/BF01912193.10.1007/BF01912193]Open DOISearch in Google Scholar
[Davidovits, J. (1994). Properties of Geopolymer Cements: First International Conference on Alkaline Cements and Concretes, pp. 131–149.]Search in Google Scholar
[Dias, D.P., and Thaumaturgo, C. (2005). Fracture toughness of geopolymeric concretes reinforced with basalt fibers: Cement and Concrete Composites, Vol. 27, No. 1, pp. 49–54, DOI: 10.1016/j.cemconcomp.2004.02.044.10.1016/j.cemconcomp.2004.02.044]Open DOISearch in Google Scholar
[Fanella, D.A., and Naaman, A.E. (1985). Stress-strain Properties of Fiber Reinforced Mortar in Compression: ACI Journal, Vol. 82, No. 4, pp. 475–483, DOI: 10.14359/10359.10.14359/10359]Search in Google Scholar
[Fernández-Jiménez, A.M., Palomo, A., and López-Hombrados, C. (2006). Engineering properties of alkali-activated fly ash concrete: ACI Materials Journal, Vol. 103, No. 2, pp. 106–112, DOI: 10.1111/j.1745-4530.2008.00353.x.10.1111/j.1745-4530.2008.00353.x]Open DOISearch in Google Scholar
[Gao, X., Yu, Q.L., Yu, R., and Brouwers, H.J.H. (2017). Evaluation of hybrid steel fiber reinforcement in high performance geopolymer composites: Materials and Structures/Materiaux et Constructions, DOI: 10.1617/s11527-017-1030-x.10.1617/s11527-017-1030-x]Open DOISearch in Google Scholar
[Gong Yi, Sben Rongxi, L.Q. Application of Durafiber to Civil Architectural Engineering: Beijing: Machine Press, pp. 54–66.]Search in Google Scholar
[Hardjito, D., Cheak, C.C., Ho, C., and Ing, L. (2008). Strength and Setting Times of Low Calcium Fly Ash-based Geopolymer Mortar: No. 1990, pp. 3–11.10.5539/mas.v2n4p3]Search in Google Scholar
[Hardjito, D., and Rangan, B. V (2005). Development and Properties of Low Calcium Fly Ash based Geopolymer Concrete: Research Report GC 1 Faculty of Engineering Curtin University of Technology Perth, Australia.]Search in Google Scholar
[He, P., Jia, D., Lin, T., Wang, M., and Zhou, Y. (2010). Effects of high-temperature heat treatment on the mechanical properties of unidirectional carbon fiber reinforced geopolymer composites: Ceramics International, Vol. 36, No. 4, pp. 1447–1453, DOI: 10.1016/j.ceramint.2010.02.012.10.1016/j.ceramint.2010.02.012]Open DOISearch in Google Scholar
[Heard, W.F., Basu, P.K., Slawson, T., and Nordendale, N.A. (2011). “Characterization and performance optimization of a cementitious composite for quasi-static and dynamic loads.” Procedia Engineering.10.1016/j.proeng.2011.04.500]Search in Google Scholar
[Hua Yuan, Liu Ronghua, Z.Y. (1998). Experimental Study on High Performance Concrete Reinforced with Fiber: China Concrete and Cement Products, Vol. 3, pp. 40–43.]Search in Google Scholar
[Hughes B.P., and Fattuhi., N.I. (1976). The Steel Fibre-Reinforced Concrete: Magazine of Concrete Research, Vol. 28, No. 96, pp. 157–161.10.1680/macr.1976.28.96.157]Search in Google Scholar
[IS: 516 (1959). Method of test for strength of concrete: Bureau of Indian Standards, New Delhi.]Search in Google Scholar
[IS: 5816 (1999). Splitting Tensile Strength of Concrete Method of Test: Bureau of Indian Standard, New Delhi.]Search in Google Scholar
[IS 10262:2009 (Ed.) Indian standards recommended Guidelines for concrete mix design, 2009th Ed., Bureau of Indian Standards.]Search in Google Scholar
[IS 3812: Part 1 (2003). Pulverized Fuel Ash-Specification: Bureau of Indian Standards.]Search in Google Scholar
[IS 383 (2016). Specification for Coarse and fine aggregates from natural sources for concrete. (IS 383:1970, Ed.): Bureau of Indian Standards.]Search in Google Scholar
[Juenger, M.C.G., Winnefeld, F., Provis, J.L., and Ideker, J.H. (2011). Advances in alternative cementitious binders: Cement and Concrete Research, DOI: 10.1016/j.cemconres.2010.11.012.10.1016/j.cemconres.2010.11.012]Open DOISearch in Google Scholar
[Kalifa, P., Chéné, G., and Gallé, C. (2001). High-temperature behaviour of HPC with polypropylene fibres - From spalling to microstructure: Cement and Concrete Research, Vol. 31, pp. 1487–1499, DOI: 10.1016/S0008-8846(01)00596-8.10.1016/S0008-8846(01)00596-8]Open DOISearch in Google Scholar
[Komonen, J., and Penttala, V. (2003). Effects of high temperature on the pore structure and strength of plain and polypropylene fiber reinforced cement pastes: Fire Technology, DOI: 10.1023/A:1021723126005.10.1023/A:1021723126005]Open DOISearch in Google Scholar
[Kuenzel, C., Vandeperre, L.J., Donatello, S., Boccaccini, A.R., and Cheeseman, C. (2012). Ambient temperature drying shrinkage and cracking in metakaolin-based geopolymers: Journal of the American Ceramic Society, Vol. 95, No. 10, pp. 3270–3277, DOI: 10.1111/j.1551-2916.2012.05380.x.10.1111/j.1551-2916.2012.05380.x]Search in Google Scholar
[Li Guangwei, Y.Y. (2001). Experimental Study on Properties of Polypropylene Fiber Reinforced Concret: Advances in China Water Conservancy and Hydropower , ,( ): 14-16, Vol. 21, No. 5, pp. 14–16.]Search in Google Scholar
[Li, Z., Zhang, Y., Zhou, X., Behzad Nematollahi, Noushini, A., Hastings, M., Castel, A., Aslani, F., Olivia, M., Nikraz, H., López-Buendía, A.M., Romero-Sánchez, M.D., Climent, V., Guillem, C., Perera, D.S., et al. (2016). A Study of Utilization Aspect of Polypropylene Fibre for Making Value Added Concrete: Construction and Building Materials, Vol. 2, No. 2, pp. 103–106, DOI: 10.15373/22778179/feb2013/37.10.15373/22778179/FEB2013/37]Search in Google Scholar
[Litvin, A. (1985). Properties of concrete containing polypropylene fibers. Report to Wire Reinforce Institute.: López-Buendía, A.M., Romero-Sánchez, M.D., Climent, V., and Guillem, C. (2013). Surface treated polypropylene (PP) fibres for reinforced concrete: Cement and Concrete Research, DOI: 10.1016/j.cemconres.2013.08.004.10.1016/j.cemconres.2013.08.004]Open DOISearch in Google Scholar
[Malhotra, V.M., Carette, G.G., and Bilodeau, A. (1994). Mechanical Properties and Durability of Polypropylene Fibre Reinforced High volume Fly Ash Concrete for Shotcrete Application: ACI Materials Journal, Vol. 91, No. 5, pp. 478–486.10.14359/4070]Search in Google Scholar
[Natali, A., Manzi, S., and Bignozzi, M.C. (2011). “Novel fiber-reinforced composite materials based on sustainable geopolymer matrix.” Procedia Engineering,, p. 1124–1131.10.1016/j.proeng.2011.11.2120]Search in Google Scholar
[Nematollahi, B., Sanjayan, J., Qiu, J., and Yang, E.H. (2017). High ductile behavior of a polyethylene fiber-reinforced one-part geopolymer composite: A micromechanics-based investigation: Archives of Civil and Mechanical Engineering, DOI: 10.1016/j.acme.2016.12.005.10.1016/j.acme.2016.12.005]Open DOISearch in Google Scholar
[Nematollahi, B., Sanjayan, J., and Shaikh, F.U.A. (2015). Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate: Ceramics International, Vol. 41, No. 4, pp. 5696–5704, DOI: 10.1016/j.ceramint.2014.12.154.10.1016/j.ceramint.2014.12.154]Open DOISearch in Google Scholar
[Olivia, M., and Nikraz, H. (2012). Properties of fly ash geopolymer concrete designed by Taguchi method: Materials and Design, Vol. 36, No. January 2011, pp. 191–198, DOI: 10.1016/j.matdes.2011.10.036.10.1016/j.matdes.2011.10.036]Open DOISearch in Google Scholar
[Parviz Soroushian and Jer-Wen Hsu, A.K. (1992). Mechanical Properties of Concrete Materials Reinforced with Polypropylene or Polyethylene Fibers: ACI Materials Journal, Vol. 89, No. 6, DOI: 10.14359/4018.10.14359/4018]Search in Google Scholar
[Perera, D.S., Uchida, O., Vance, E.R., and Finnie, K.S. (2007). Influence of curing schedule on the integrity of geopolymers: Journal of Materials Science, Vol. 42, No. 9, pp. 3099–3106, DOI: 10.1007/s10853-006-0533-6.10.1007/s10853-006-0533-6]Open DOISearch in Google Scholar
[Puertas, F., Amat, T., Fernández-Jiménez, A., and Vázquez, T. (2003). Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres: Cement and Concrete Research, Vol. 33, No. 12, pp. 2031–2036, DOI: 10.1016/S0008-8846(03)00222-9.10.1016/S0008-8846(03)00222-9]Open DOISearch in Google Scholar
[Rai, B., Roy, L.B., and Rajjak, M. (2018). A statistical investigation of different parameters influencing compressive strength of fly ash induced geopolymer concrete: Structural Concrete, DOI: 10.1002/suco.201700193.10.1002/suco.201700193]Open DOISearch in Google Scholar
[Ranjbar, N., Mehrali, M., Behnia, A., Javadi Pordsari, A., Mehrali, M., Alengaram, U.J., and Jumaat, M.Z. (2016a). A Comprehensive Study of the Polypropylene Fiber Reinforced Fly Ash Based Geopolymer: PloS one, Vol. 11, No. 1, p. e0147546, DOI: 10.1371/journal.pone.0147546.10.1371/journal.pone.0147546472656726807825]Search in Google Scholar
[Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U.J., and Jumaat, M.Z. (2015). Graphene nanoplatelet-fly ash based geopolymer composites: Cement and Concrete Research, Vol. 76, pp. 222–231, DOI: 10.1016/j.cemconres.2015.06.003.10.1016/j.cemconres.2015.06.003]Open DOISearch in Google Scholar
[Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U.J., and Jumaat, M.Z. (2016b). High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber: Construction and Building Materials, DOI: 10.1016/j.conbuildmat.2016.02.228.10.1016/j.conbuildmat.2016.02.228]Open DOISearch in Google Scholar
[Ranjbar, N., Talebian, S., Mehrali, M., Kuenzel, C., Cornelis Metselaar, H.S., and Jumaat, M.Z. (2016c). Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites: Composites Science and Technology, Vol. 122, pp. 73–81, DOI: 10.1016/j.compscitech.2015.11.009.10.1016/j.compscitech.2015.11.009]Open DOISearch in Google Scholar
[Reed, M., Lokuge, W., and Karunasena, W. (2014). Fibre-reinforced geopolymer concrete with ambient curing for in situ applications: Journal of Materials Science, Vol. 49, No. 12, pp. 4297–4304, DOI: 10.1007/s10853-014-8125-3.10.1007/s10853-014-8125-3]Open DOISearch in Google Scholar
[Richardson, A.E. (2006). Compressive strength of concrete with polypropylene fibre additions: Structural Survey, Vol. 24, No. 2, pp. 138–153, DOI: 10.1108/02630800610666673.10.1108/02630800610666673]Open DOISearch in Google Scholar
[Ridtirud, C., Chindaprasirt, P., and Pimraksa, K. (2011). Factors affecting the shrinkage of fly ash geopolymers: International Journal of Minerals, Metallurgy and Materials, Vol. 18, No. 1, pp. 100–104, DOI: 10.1007/s12613-011-0407-z.10.1007/s12613-011-0407-z]Open DOISearch in Google Scholar
[Shaikh, F.U.A. (2013a). Deflection hardening behaviour of short fibre reinforced fly ash based geopolymer composites: Materials and Design, Vol. 50, pp. 674–682, DOI: 10.1016/j.matdes.2013.03.063.10.1016/j.matdes.2013.03.063]Open DOISearch in Google Scholar
[Shaikh, F.U.A. (2013b). Review of mechanical properties of short fibre reinforced geopolymer composites: Construction and Building Materials, Vol. 43, pp. 37–49, DOI: 10.1016/j.conbuildmat.2013.01.026.10.1016/j.conbuildmat.2013.01.026]Open DOISearch in Google Scholar
[Sofi, M., van Deventer, J.S.J., Mendis, P.A., and Lukey, G.C. (2007). Engineering properties of inorganic polymer concretes (IPCs): Cement and Concrete Research, Vol. 37, No. 2, pp. 251–257, DOI: 10.1016/j.cemconres.2006.10.008.10.1016/j.cemconres.2006.10.008]Open DOISearch in Google Scholar
[Song, P.S., and Hwang, S. (2004). Mechanical properties of high-strength steel fiber-reinforced concrete: Construction and Building Materials, Vol. 18, No. 9, pp. 669–673, DOI: 10.1016/j.conbuildmat.2004.04.027.10.1016/j.conbuildmat.2004.04.027]Open DOISearch in Google Scholar
[Tomkins, B.W. (2011). Chemical Resistance of Geopolymer Concrete Against H2SO4 and NaOH, p. 110.]Search in Google Scholar
[Urbanova, M., Andertova, J., Brus, J., Vorel, J., Koloušek, D., and Hulinsky, V. (2007). Preparation, structure and hydrothermal stability of alternative (sodium silicate-free) geopolymers: Journal of Materials Science, Vol. 42, No. 22, pp. 9267–9275, DOI: 10.1007/s10853-007-1910-5.10.1007/s10853-007-1910-5]Open DOISearch in Google Scholar
[Wallah, S.E., and Rangan, B. V (2006). Low-Cakcium Fly Ash Based.]Search in Google Scholar
[Yost, J.R., Radlińska, A., Ernst, S., and Salera, M. (2013). Structural behavior of alkali activated fly ash concrete. Part. Mixture design, material properties and sample fabrication: Materials and Structures/Materiaux et Constructions, DOI: 10.1617/s11527-012-9919-x.10.1617/s11527-012-9919-x]Open DOISearch in Google Scholar
[Yunsheng, Z., Wei, S., Zongjin, L., Xiangming, Z., Eddie, and Chungkong, C. (2008). Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber: Construction and Building Materials, Vol. 22, No. 3, pp. 370–383, DOI: 10.1016/j.conbuildmat.2006.08.006.10.1016/j.conbuildmat.2006.08.006]Open DOISearch in Google Scholar
[Zhang, Z., Yao, X., Zhu, H., Hua, S., and Chen, Y. (2009). Preparation and mechanical properties of polypropylene fiber reinforced calcined kaolin-fly ash based geopolymer: Journal of Central South University of Technology, Vol. 16, pp. 49–52, DOI: 10.1007/s11771-009-0008-4.10.1007/s11771-009-0008-4]Open DOISearch in Google Scholar
[Zollo, R.F. Collated fibrillated polypropylene fibers in FRC, in G.C. Hoff (ed.) Fiber Reinforced Concrete: American Concrete Institute, Farmington Hills, MI, Vol. SP-81, pp. 397–409.]Search in Google Scholar
[Zuhua, Z., Xiao, Y., Huajun, Z., and Yue, C. (2009). Role of water in the synthesis of calcined kaolin-based geopolymer: Applied Clay Science, Vol. 43, No. 2, pp. 218–223, DOI: 10.1016/j.clay.2008.09.003.10.1016/j.clay.2008.09.003]Open DOISearch in Google Scholar