The effect of the densification process on dowel tensile performance with different types of glues

Adlam, R. 2005. Thermomechanical Densification of Timber: Initial Investigations of the Potential of Softwood Timber. Forest and Wood Products Research and Development Corporation, Australia. AdlamR. 2005 Thermomechanical Densification of Timber: Initial Investigations of the Potential of Softwood Timber Forest and Wood Products Research and Development Corporation Australia Search in Google Scholar

Ahmed, S.A., Moren, T., Hagman, O., Cloutier, A., Fang, C.H., Elustondo, D. 2013. Anatomical properties and process parameters affecting blister/blow formation in densified European aspen and downy birch sapwood boards by thermo-hygro-mechanical compression. Journal of Materials Science, 48, 8571–8579. DOI: https://doi.org/10.1007/s10853-013-7679-9 AhmedS.A. MorenT. HagmanO. CloutierA. FangC.H. ElustondoD. 2013 Anatomical properties and process parameters affecting blister/blow formation in densified European aspen and downy birch sapwood boards by thermo-hygro-mechanical compression Journal of Materials Science 48 8571 8579 DOI: https://doi.org/10.1007/s10853-013-7679-9 10.1007/s10853-013-7679-9 Search in Google Scholar

Altınok, M. 1998. Effects on the adhesion resistance of wooden surfaces treated in woodworking basic machines. Polytechnic Magazine, 1 (2), 17–20. AltınokM. 1998 Effects on the adhesion resistance of wooden surfaces treated in woodworking basic machines Polytechnic Magazine 1 2 17 20 Search in Google Scholar

ASTM A1035. 2021. Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement. ASTM. ASTM A1035 2021 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement ASTM Search in Google Scholar

Atar, M., Özçiftçi, A. 1999. Effects of bleaching chemicals on the adhesion strength of PVAc glue in wood material. Turkish Journal of Forestry, 11 (1), 15–45. AtarM. ÖzçiftçiA. 1999 Effects of bleaching chemicals on the adhesion strength of PVAc glue in wood material Turkish Journal of Forestry 11 1 15 45 Search in Google Scholar

Atılgan A. 2019. The effect of thermo-mechanical concentrated wood material on adhesion resistance in varnishes. Undergraduate thesis, Gazi University, Ersin Ercan, Kadir Aydin, Cansu Özder, Musa Atar Faculty of Technology, Department of Wood Industry Engineering, Ankara, Turkey. AtılganA. 2019 The effect of thermo-mechanical concentrated wood material on adhesion resistance in varnishes Undergraduate thesis, Gazi University, Ersin Ercan, Kadir Aydin, Cansu Özder, Musa Atar Faculty of Technology, Department of Wood Industry Engineering Ankara, Turkey Search in Google Scholar

Blomberg, J. 2006. Mechanical and physical properties of semi-isostatically densified wood. Doctoral thesis, Lulea University of Technology, Division of Wood Technology, Sweden. BlombergJ. 2006 Mechanical and physical properties of semi-isostatically densified wood Doctoral thesis, Lulea University of Technology, Division of Wood Technology Sweden Search in Google Scholar

Eckelman, C.A. 1979. Withdrawal strength of dowel joints: effect of shear strength. Forest Product Journal, 29 (1), 48–52. EckelmanC.A. 1979 Withdrawal strength of dowel joints: effect of shear strength Forest Product Journal 29 1 48 52 Search in Google Scholar

Imirzi, Ö., Ülker, O., Burdurlu, E. 2014. Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (Pinus sylvestris L.). BioResources, 9 (1), 191–209. ImirziÖ. ÜlkerO. BurdurluE. 2014 Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (Pinus sylvestris L.) BioResources 9 1 191 209 10.15376/biores.9.1.191-209 Search in Google Scholar

Karaman, A., Yıldırım, M.N., Uslu, E. 2019. Effect of dowel wood species on dowel tensile strength in wooden length joints bonded with different adhesives. Turkish Journal of Forestry, 20 (4), 427–432. DOI: 10.18182/tjf.591404 KaramanA. YıldırımM.N. UsluE. 2019 Effect of dowel wood species on dowel tensile strength in wooden length joints bonded with different adhesives Turkish Journal of Forestry 20 4 427 432 10.18182/tjf.591404 Open DOISearch in Google Scholar

Kasal, A. 2007. Determination of dowel holding performance of wood materials. Journal of Engineering and Architecture Faculty, 3, 387–397. KasalA. 2007 Determination of dowel holding performance of wood materials Journal of Engineering and Architecture Faculty 3 387 397 Search in Google Scholar

Kasal, A., Tolga, K., Smardzewski, J. 2020. Experimental and numerical study on withdrawal strength of different types of auxetic dowels for furniture joints. Materials, 13 (19), 4252. KasalA. TolgaK. SmardzewskiJ. 2020 Experimental and numerical study on withdrawal strength of different types of auxetic dowels for furniture joints Materials 13 19 4252 10.3390/ma13194252757945532987710 Search in Google Scholar

Keskin, H., Atar, M., Akyildiz, M.H. Bonding strengths of polyvinyl acetate, Desmodur-VTKA, phenolformaldehyde and urea-formaldehyde adhesives in wood materials impregnated with Vacsol Azure. Materials and Design, 30 (9), 3789–3794. DOI: https://doi.org/10.1016/j.matdes.2009.01.032 KeskinH. AtarM. AkyildizM.H. Bonding strengths of polyvinyl acetate, Desmodur-VTKA, phenolformaldehyde and urea-formaldehyde adhesives in wood materials impregnated with Vacsol Azure Materials and Design 30 9 3789 3794 DOI: https://doi.org/10.1016/j.matdes.2009.01.032 10.1016/j.matdes.2009.01.032 Search in Google Scholar

Kloiber, M., Tippner, J., Hrivnák, J. 2014. Mechanical properties of wood examined by semi-destructive devices. Materials and Structures, 47, 199–212. DOI: https://doi.org/10.1617/s11527-013-0055-z KloiberM. TippnerJ. HrivnákJ. 2014 Mechanical properties of wood examined by semi-destructive devices Materials and Structures 47 199 212 DOI: https://doi.org/10.1617/s11527-013-0055-z 10.1617/s11527-013-0055-z Search in Google Scholar

Korkut, S.D., Hiziroğlu, S., Aytin, A. 2013. Effect of heat treatment on surface characteristics wild cherry wood. BioResources, 8 (2), 1582–1590. KorkutS.D. HiziroğluS. AytinA. 2013 Effect of heat treatment on surface characteristics wild cherry wood BioResources 8 2 1582 1590 10.15376/biores.8.2.1582-1590 Search in Google Scholar

Kutnar, A., Kamke, F.A., Sernek, M. 2008. The mechanical properties of densified VTC wood relevant for structural composites. Holz als Roh-und Werkstoff, 66 (6), 439–446. KutnarA. KamkeF.A. SernekM. 2008 The mechanical properties of densified VTC wood relevant for structural composites Holz als Roh-und Werkstoff 66 6 439 446 10.1007/s00107-008-0259-z Search in Google Scholar

Küdela, J., Resetka, M. 2011. Influence of high pressing temperature on dimensional stability of beech wood. Forestry and Wood Technology, 75, 19–25. KüdelaJ. ResetkaM. 2011 Influence of high pressing temperature on dimensional stability of beech wood Forestry and Wood Technology 75 19 25 Search in Google Scholar

Laine, K. et al. 2016. Wood densification and thermal modification: hardness, set recovery and micro-morphology. Wood Science and Technology, 50, 883–894. DOI: https://doi.org/10.1007/s00226-016-0835-z LaineK. 2016 Wood densification and thermal modification: hardness, set recovery and micro-morphology Wood Science and Technology 50 883 894 DOI: https://doi.org/10.1007/s00226-016-0835-z 10.1007/s00226-016-0835-z Search in Google Scholar

Li, L., Gong, M., Yuan, N., Li, D. 2013. An Optimal thermo-hydro-mechanical densification (THM) process for densifying balsam fir wood. BioResources, 8 (3), 3967–3981. LiL. GongM. YuanN. LiD. 2013 An Optimal thermo-hydro-mechanical densification (THM) process for densifying balsam fir wood BioResources 8 3 3967 3981 10.15376/biores.8.3.3967-3981 Search in Google Scholar

Navi, P., Girardet, F. 2000. Effects of thermo-hydro-mechanical treatment on the structure and properties of wood. Holzforschung, 54 (3), 287–293. NaviP. GirardetF. 2000 Effects of thermo-hydro-mechanical treatment on the structure and properties of wood Holzforschung 54 3 287 293 10.1515/HF.2000.048 Search in Google Scholar

Parham, R.A., Gray, R.L. 1984. Formation and structure of wood. In: The Chemistry of Solid Wood (ed. R. Rowell). American Chemical Society, 13–56. DOI: 10.1021/ba-1984-0207.ch ParhamR.A. GrayR.L. 1984 Formation and structure of wood In: The Chemistry of Solid Wood ed. RowellR. American Chemical Society 13 56 10.1021/ba-1984-0207.ch Open DOISearch in Google Scholar

Pelit, H. 2014. The effects of densification and heat treatment on finishing process with some technological properties of Eastern beech and scots pine. PhD thesis, Gazi University, Ankara, Turkey. PelitH. 2014 The effects of densification and heat treatment on finishing process with some technological properties of Eastern beech and scots pine PhD thesis, Gazi University Ankara, Turkey Search in Google Scholar

Rautkari, L., Properzi, M., Pichelin, F., Hughes, M. 2009. Surface modification of wood using friction. Wood Science and Technology, 43, 291–299. RautkariL. ProperziM. PichelinF. HughesM. 2009 Surface modification of wood using friction Wood Science and Technology 43 291 299 10.1007/s00226-008-0227-0 Search in Google Scholar

Santos, C.M.T. dos., Menezzi, C.H.S. Del., Souza, M.R. de. 2012. Properties of thermo-mechanically treated wood from Pinus caribaea var. Hondurensis. BioResources, 7 (2), 1850–1865. SantosC.M.T. dos. MenezziC.H.S. Del. SouzaM.R. de. 2012 Properties of thermo-mechanically treated wood from Pinus caribaea var. Hondurensis BioResources 7 2 1850 1865 10.15376/biores.7.2.1850-1865 Search in Google Scholar

Tabarsa, T., Chui, Y.H. 1997. Effects of hot-pressing on properties of white spruce. Forest Products Journal, 47, 71–76. TabarsaT. ChuiY.H. 1997 Effects of hot-pressing on properties of white spruce Forest Products Journal 47 71 76 Search in Google Scholar

TS 2475. 1976. Odunda liflere paralel doğrultuda çekme gerilmesinin tayini. T.S.E., Ankara. TS 2475 1976 Odunda liflere paralel doğrultuda çekme gerilmesinin tayini T.S.E. Ankara Search in Google Scholar

TS ISO 3129. 2021. Odun – Küçük kusursuz odun numunelerinin mekanik ve fiziksel muayenesi için genel gerekler ve numune alma yöntemleri. T.S.E., Ankara. TS ISO 3129 2021 Odun – Küçük kusursuz odun numunelerinin mekanik ve fiziksel muayenesi için genel gerekler ve numune alma yöntemleri T.S.E. Ankara Search in Google Scholar

Ulker, O., Aslanova, F., Hiziroglu, S. 2018. Properties of thermally treated yellow poplar, southern pine, and eastern redcedar. BioResources, 13 (4), 7726–7737. UlkerO. AslanovaF. HizirogluS. 2018 Properties of thermally treated yellow poplar, southern pine, and eastern redcedar BioResources 13 4 7726 7737 10.15376/biores.13.4.7726-7737 Search in Google Scholar

Ulker, O., Burdurlu, E. 2016. Some mechanical properties of densified and laminated lombardy poplar (Populus nigra L.). Wood Research, 61 (6), 959–970. UlkerO. BurdurluE. 2016 Some mechanical properties of densified and laminated lombardy poplar (Populus nigra L.) Wood Research 61 6 959 970 Search in Google Scholar

Ulker, O., Hiziroglu, S. 2017. Some properties of densified eastern redcedar as function of heat and pressure. Materials, 10 (11), 1275. DOI: https://doi.org/10.3390/ma10111275 UlkerO. HizirogluS. 2017 Some properties of densified eastern redcedar as function of heat and pressure Materials 10 11 1275 DOI: https://doi.org/10.3390/ma10111275 10.3390/ma10111275570622229112127 Search in Google Scholar

Ulker, O., İmirzi, Ö., Burdurlu, E. 2012. The effect of densification temperature on some physical and mechanical properties of Scots pine (Pinus sylvestris L.). BioResources, 7 (4), 5581–5592. UlkerO. İmirziÖ. BurdurluE. 2012 The effect of densification temperature on some physical and mechanical properties of Scots pine (Pinus sylvestris L.) BioResources 7 4 5581 5592 10.15376/biores.7.4.5581-5592 Search in Google Scholar

Ulker, O., İmirzi, Ö., Burdurlu, E. 2014. Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (Pinus sylvestris L.). BioResources, 9 (1), 191–209. UlkerO. İmirziÖ. BurdurluE. 2014 Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (Pinus sylvestris L.) BioResources 9 1 191 209 Search in Google Scholar