<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The main air pollutants in the sintering process of iron ore are polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and harmful dust. Ore sintering on sinter strands is one of the first technology steps in the ironworks. It is a process in which iron ore is crushed, subjected to annealing and mixed with appropriate additives, and then sintered in order to produce sinter which is the main component of iron in the blast furnace process. PCDD/Fs emissions were measured and the addition of ammonium sulfate as an inhibitor of the synthesis of dioxins in the sintering process of iron ore was studied.</p></abstract>

The main air pollutants in the sintering process of iron ore are polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and harmful dust. Ore sintering on sinter strands is one of the first technology steps in the ironworks. It is a process in which iron ore is crushed, subjected to annealing and mixed with appropriate additives, and then sintered in order to produce sinter which is the main component of iron in the blast furnace process. PCDD/Fs emissions were measured and the addition of ammonium sulfate as an inhibitor of the synthesis of dioxins in the sintering process of iron ore was studied.

The use of ammonium sulfate as an inhibitor of dioxin synthesis in iron ore sintering process

Faculty of Process and Environmental Engineering, Lodz University of Technology, ul. Wólczańska 175, 90-924 Łódź, Poland, phone +48 42 631 37 95, fax +48 42 636 81 33

Ecological Chemistry and Engineering S

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

The main air pollutants in the sintering process of iron ore are polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and harmful dust....

The use of ammonium sulfate as an inhibitor of dioxin synthesis in iron ore sintering process

Online veröffentlicht: 09. Apr. 2014

Seitenbereich: 59 - 70

DOI: https://doi.org/10.2478/eces-2014-0005

Schlüsselwörter
iron ore sintering, polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, inhibitor, ammonium sulphate, de novo synthesis, emission reduction

© by Patrycja Łechtańska

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

The use of ammonium sulfate as an inhibitor of dioxin synthesis in iron ore sintering process

Online veröffentlicht: 09. Apr. 2014

Seitenbereich: 59 - 70

DOI: https://doi.org/10.2478/eces-2014-0005

Schlüsselwörteriron ore sintering, polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, inhibitor, ammonium sulphate, de novo synthesis, emission reduction

© by Patrycja Łechtańska

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Schlüsselwörter
iron ore sintering, polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, inhibitor, ammonium sulphate, de novo synthesis, emission reduction