<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper deals with the analytical and experimental determination of the forced convection heat transfer coefficients over the flat coil module. In the analytical part, the forced convection coefficients at different wind speeds are calculated based on various known equations of the forced convection heat transfer coefficient with unheated starting length. The experimental part presents the description of the test: loading the coil with DC current and measurements of the coil temperatures with thermal sensors while it was inside a wind tunnel. Based on the measurement, the convection coefficients were determined. In the final part, the experimental and analytical results are compared. It is found that the accuracy of the analytical results is more precise in highly turbulent flows.</p></abstract>

The paper deals with the analytical and experimental determination of the forced convection heat transfer coefficients over the flat coil module. In the analytical part, the forced convection coefficients at different wind speeds are calculated based on various known equations of the forced convection heat transfer coefficient with unheated starting length. The experimental part presents the description of the test: loading the coil with DC current and measurements of the coil temperatures with thermal sensors while it was inside a wind tunnel. Based on the measurement, the convection coefficients were determined. In the final part, the experimental and analytical results are compared. It is found that the accuracy of the analytical results is more precise in highly turbulent flows.

Determination of Heat Transfer Coefficient for the Air Forced Cooling Over a Flat Side of Coil

Electrical, Control and Communication Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The paper deals with the analytical and experimental determination of the forced convection heat transfer coefficients over the flat coil module. In the...

Determination of Heat Transfer Coefficient for the Air Forced Cooling Over a Flat Side of Coil

Online veröffentlicht: 18. Sept. 2019

Seitenbereich: 15 - 20

DOI: https://doi.org/10.2478/ecce-2019-0003

Schlüsselwörter
Flat surface, Forced convection, Heat transfer coefficient, Laminar and turbulent flow

© 2019 Payam Shams Ghahfarokhi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Determination of Heat Transfer Coefficient for the Air Forced Cooling Over a Flat Side of Coil

Online veröffentlicht: 18. Sept. 2019

Seitenbereich: 15 - 20

DOI: https://doi.org/10.2478/ecce-2019-0003

SchlüsselwörterFlat surface, Forced convection, Heat transfer coefficient, Laminar and turbulent flow

© 2019 Payam Shams Ghahfarokhi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
Flat surface, Forced convection, Heat transfer coefficient, Laminar and turbulent flow