<abstract xmlns="http://www.w3.org/1999/xhtml"><p> This paper describes a mathematical modelling approach for heat transfer calculations in underground high voltage and middle voltage electrical power cables. First of the all typical layout of the cable in the sand or soil is described. Then numerical algorithms are targeted to the two-dimensional mathematical models of transient heat transfer. Finite Volume Method is suggested for calculations. Different strategies of nonorthogonality error elimination are considered. Acute triangles meshes were applied in two-dimensional domain to eliminate this error. Adaptive mesh is also tried. For calculations OpenFOAM open source software which uses Finite Volume Method is applied. To generate acute triangles meshes aCute library is used. The efficiency of the proposed approach is analyzed. The results show that the second order of convergence or close to that is achieved (in terms of sizes of finite volumes). Also it is shown that standard strategy, used by OpenFOAM is less efficient than the proposed approach. Finally it is concluded that for solving real problem a spatial adaptive mesh is essential and adaptive time steps also may be needed.</p></abstract>

This paper describes a mathematical modelling approach for heat transfer calculations in underground high voltage and middle voltage electrical power cables. First of the all typical layout of the cable in the sand or soil is described. Then numerical algorithms are targeted to the two-dimensional mathematical models of transient heat transfer. Finite Volume Method is suggested for calculations. Different strategies of nonorthogonality error elimination are considered. Acute triangles meshes were applied in two-dimensional domain to eliminate this error. Adaptive mesh is also tried. For calculations OpenFOAM open source software which uses Finite Volume Method is applied. To generate acute triangles meshes aCute library is used. The efficiency of the proposed approach is analyzed. The results show that the second order of convergence or close to that is achieved (in terms of sizes of finite volumes). Also it is shown that standard strategy, used by OpenFOAM is less efficient than the proposed approach. Finally it is concluded that for solving real problem a spatial adaptive mesh is essential and adaptive time steps also may be needed.

The Mathematical Modelling of Heat Transfer in Electrical Cables

Researcher, Vilnius Gediminas Technical University - VGTU

Researcher, VGTU), Olga Suboč (Researcher, VGTU

Electrical, Control and Communication Engineering

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

{"article-title":"The Mathematical Modelling of Heat Transfer in Electrical Cables"}

This paper describes a mathematical modelling approach for heat transfer calculations in underground high voltage and middle voltage electrical power cables....

The Mathematical Modelling of Heat Transfer in Electrical Cables

Online veröffentlicht: 17. Mai 2014

Seitenbereich: 46 - 53

DOI: https://doi.org/10.2478/ecce-2014-0007

Schlüsselwörter
Power transmission, Numerical models, Finite element analysis, Finite volume methods, Convergence of numerical methods

© Riga Technical University

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

The Mathematical Modelling of Heat Transfer in Electrical Cables

Online veröffentlicht: 17. Mai 2014

Seitenbereich: 46 - 53

DOI: https://doi.org/10.2478/ecce-2014-0007

SchlüsselwörterPower transmission, Numerical models, Finite element analysis, Finite volume methods, Convergence of numerical methods

© Riga Technical University

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Schlüsselwörter
Power transmission, Numerical models, Finite element analysis, Finite volume methods, Convergence of numerical methods