[
Agacayak, T., Aras, A., Aydogan, S., Erdemoglu, M., 2014. Leaching of chlacopyrite concentrate in hydrogen peroxide solution, Physicochemical Problems in Mineral Processing, 50, 657-666, DOI: 10.5277/ppmp140219.
]Search in Google Scholar
[
Borkowski, S., Ulewicz, R., Selejdak, J., Konstanciak, M., Klimecka-Tatar, D. 2012. The use of 3x3 matrix to evaluation of ribbed wire manufacturing technology, METAL 2012 - Conference Proceedings, 21st International Conference on Metallurgy and Materials, 1722–1728
]Search in Google Scholar
[
AHN, J., WU, J., LEE, J., (2019). Investigation on chalcopyrite leaching with methanesulfonic acid (MSA) and hydrogen peroxide. Hydrometallurgy, 187, 54-62, DOI: 10.1016/j.hydromet.2019. 05.001.
]Search in Google Scholar
[
Barakat, M., Mahmoud, M.H.H., Shehata, M.M., 2007. Hydrometallurgical recovery of zinc from fine blend of galvanization processes, Separation Science and Technology 41, 1757-1772, DOI: 10.1080/01496390600588747.
]Search in Google Scholar
[
Brožová, S., Lisinska, M., Saternus, M., Gajda, B., Martynková, G.S., Slíva, A., 2021. Hydrometallurgical recycling process for mobile phone, printed circuit boards using ozone, Metals, 11(5), 820, DOI: 10.3390/met11 050820.
]Search in Google Scholar
[
Brožová, S., Drápala, J., Kursa, M., Pustějovská, P., Jursová, S., (2016). Leaching refuse after sphalerite mineral for extraction zinc and cobalt, Metalurgija, 55(3), 497-499.
]Search in Google Scholar
[
Dvořák, P., Jandová, J., 2005. Hydrometallurgical recovery of zinc from hot dip galvanizing ash, Hydrometallurgy, 77, 29-33, DOI: 10.1016/j.hydromet.2004.10.007
]Search in Google Scholar
[
Havlík, T., Oráč, D., Petraniková, M., Mišku-Fová, A., (2011). Hydrometallurgical treatment of used printed circuit boards after thermal treatment, Waste Managagement, 31(7), 1542–1546, DOI: 10.1016/j.wasman.2011.02.012.
]Search in Google Scholar
[
Grebski, M., Mazur, M., 2022. Social climate of support for innovativeness, Production Engineering Archives, 28(1), 110–116
]Search in Google Scholar
[
Gupta, Ch.K., 2004. Chemical metallurgy. Principles and practice, DOI: 10.1002/anie.200385071 (Access: 10.03.2022).
]Search in Google Scholar
[
Krištofová, D., 2001. Recyklace ušlechtilých kovů Ostrava: VŠB - Technická univerzita Ostrava, Czech Republic.
]Search in Google Scholar
[
Kuzior, A. 2022., Technological unemployment in the perspective of industry 4.0 development, Virtual Economics, 5(1), 7–23
]Search in Google Scholar
[
Kuzior, A., Zozul'ak, J. 2019. Adaptation of the Idea of Phronesis in Contemporary Approach to Innovation, Management Systems in Production Engineering, 27(2), 84–87
]Search in Google Scholar
[
Liquid waste, treatment in galvanizing and zinc electroplating. Industrial wastewater & air treatment. https://condorchem.com/en/blog/treatment-waste-electroplating-industry-zinc-coatings/ (Access: 15.06.2022).
]Search in Google Scholar
[
Jackson, E., 1986. Hydrometallurgical extraction and reclamation. Ellis Horwood Limited, New York, USA. DOI: 10.1016/0304-386X(87)90057-0.
]Search in Google Scholar
[
Lisińska, M., Saternus M., Willner J., 2018. Research of leaching of the printed circuit boards coming from waste mobile phones, Archives of Metallurgy and Materials, 63(1), 143-147, DOI: 10.24425/118921.
]Search in Google Scholar
[
Dziuba, S.T., Ingaldi, M., 2018. Segragation and recycling of packaging waste by individual consumers in Poland. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 3(5), 545-552.
]Search in Google Scholar
[
Larina, I.V., Larin, A.N., Kiriliuk, O., Ingaldi, M., 2021. Green logistics - Modern transportation process technology, Production Engineering Archives, 27 (3), 184-190, DOI: 10.30657/pea.2021.27.24.
]Search in Google Scholar
[
Radzyminska-Lenarcik, E., Ulewicz, R., Ulewicz, M. 2018, Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole, Desalination and Water Treatment, 102, 211–219.
]Search in Google Scholar
[
Radzyminska-Lenarcik E., Pyszka I., Ulewicz M., 2020, Separation of Zn(II), Cr(III), and Ni(II) ions using the polymer inclusion membranes containing acetylacetone derivative as the carrier, Membranes, 10(5):88, DOI: 10.3390/membranes10050088.
]Search in Google Scholar
[
Radzyminska-Lenarcik E., Ulewicz M,, 2019, Application of polymer inclusion membranes based on CTA with 1-alkylimidazoles on zinc(II) and manganese(II) ions separation from aqueous solutions, Polymers, 11(2), 242; DOI:10.3390/polym11020242.
]Search in Google Scholar
[
Radzyminska-Lenarcik E., Ulewicz M., Pyszka I., 2020a, Application of Polymer Inclusion Membranes Doped with Alkylimidazole to Separation of Silver and Zinc Ions from Model Solutions and after Battery Leaching, Materials, 13, 3103; DOI:10.3390/ma13143103
]Search in Google Scholar
[
Ulewicz M., Radzyminska-Lenarcik E., Application of Polymer and Supported Membranes with 1-Decyl-4-Methylimidazole for Pertraction of Transition Metal Ions, 2014, Separation Science and Technology, 49 (11), 1713-1721. DOI: 10.1080/01496395.2014.906453
]Search in Google Scholar
[
Ulewicz M, Radzyminska-Lenarcik E., Application of supported and polymer membrane with 1 decyl-2-methylimidazole for separation of transition metal ions, 2012, Physicochemical Problems of Mineral Processing, 48, 91-102.
]Search in Google Scholar
[
Škůrková, K.L., Ingaldi, M., 2014. Recycling process of the aluminium cans as an example of the renewable material sources, Advanced Materials Research, 1001,, 103-108, DOI: 10.4028/www.scientific.net/AMR.1001.103.
]Search in Google Scholar
[
Jagielska-Wiaderek, K., Klimecka-Tatar, D., 2023. Impact of the acidity of the medium on the corrosion resistance of the boronized surface layer - based on the cross-section of the boronized layer obtained on X6CrNiTi18-10 steel, Ochrona Przed Korozją, 66(10), 324-328, DOI: 10.15199/40.2023.10.2.
]Search in Google Scholar
[
Lipiński, T., Ulewicz, R., 2023. Degradation of R35 Steel in 5% NaCl environment at 10°C, Materials Research Proceedings, 2023, 34, 77-86, DOI: 10.21741/9781644902691-10.
]Search in Google Scholar
[
Krynke, M., Knop, K., Mazur, M., 2022. Maintenance management of large-size rolling bearings in heavy-duty machinery, Acta Montanistica Slovaca, 27(2), 327-341, DOI: 10.46544/AMS.v27i2.04.
]Search in Google Scholar
[
Mazur, M., 2018. Analysis of production incompatibilities and risk level in series production of assembly elements for the automotive industry, MATEC Web of Conferences, 183, 03011, DOI: 10.1051/matecconf/201818303011.
]Search in Google Scholar
[
Krynke, M., 2021. Personnel Management on the Production Line Using the FlexSim Simulation Environment, Manufacturing Technology, 21(5), 657-667, DOI: 10.21062/mft.2021.073.
]Search in Google Scholar
[
Muneer, R.M., Idzikowski, A., Al-Zubiedy, A., 2023. Electrical properties for cold sprayed Nano copper oxide thin films, Production Engineering Archives, 29(2), 225-230, DOI: 10.30657/pea.2023.29.26.
]Search in Google Scholar
[
Sokić, M., Marković, B., Stanković, S., Kamberović, Ž., Štrbac, N., Manojlović, V., Petronijević, N., 2019. Kinetics of chalcopyrite leaching by hydrogen peroxide in sulfuric acid, Metals, 9(11), 1173, DOI: 10.3390/met9111173.
]Search in Google Scholar
[
Ulewicz, R., Mazur, M., Bokůvka, O. 2013. Structure and mechanical properties of finegrained steels, Periodica Polytechnica Transportation Engineering, 41(2), 111–115.
]Search in Google Scholar
[
Walichnowska, P., Idzikowski, A., 2023. Assessment and Analysis of the Environmental Impact of the Thermo-Shrinkable Packaging Process on the Way the Packaging Machine is Powered Based on LCA. Management Systems in Production, 31(3), 355-360, DOI: 10.2478/mspe-2023-0039.
]Search in Google Scholar