Evaluation of the Properties of Recycled Concrete Aggregate and Their Potential Use in Road Paving

[1] PANDEY, A.: Soil stabilization using cement. Int. J. Civ. Eng. Technol., 2017, 8, 316–322. Search in Google Scholar

[2] PEREIRA, R. S. – EMMERT, F. – MIGUEL, E. P. – GATTO, A.: Soil Stabilization with Lime for the Construction of Forest Roads. Floresta e Ambient., 2018, 25. Search in Google Scholar

[3] EMARAH, D. A. – SELEEM, S. A.: Swelling soils treatment using lime and sea water for roads construction. Alex. Eng. J., 2018, 57, 2357–2365. Search in Google Scholar

[4] PAUL, S.: Mechanical Behavior and Durability Performance of Concrete Containing Recycled Concrete Aggregate. Master’s Thesis, 2011, pp. 255. DOI: 10.13140/RG.2.1.1471.6882. Search in Google Scholar

[5] SHAROBIM, K. G. et al.: Assessment of Recycled Concrete Aggregates as an Aggregate for Roads. Volume 21, No. 1, March 2017, pp. 41–48. Search in Google Scholar

[6] ANDERSON, K. W. et al.: Use of Recycled Concrete Aggregate in PCCP: Literature Search. WA-RD 726.1, June 2009. Search in Google Scholar

[7] CONTRAFATTO, L. D. et al.: Use of recycled aggregates in road sub-base construction and concrete manufacturing. Annals of Geophysics, 2018, 61, 2, SE223. DOI: 10.4401/ag-7785. Search in Google Scholar

[8] PICKEL, D.: Recycled concrete aggregate: Influence of aggregate pre-saturation and curing conditions on the hardened properties of concrete. Thesis, 2014. Search in Google Scholar

[9] TOLSMA, S. – TORFGÅRD, I.: Recycling of concrete for sustainable road construction, 2018. Search in Google Scholar

[10] GOKCE, A. et al.: Identification of frost-susceptible recycled concrete aggregates for durability of concrete. Construction and Building Materials, 2011. Search in Google Scholar

[11] HASSOON, A. – AL-OBAEDI, J.: The use of recycled concrete as a sub-base layer for highways. College of Engineering, 2014. Available at: https://www.researchgate.net/publication/323117115. Search in Google Scholar

[12] KASHOBOROZI, O. et al.: Use of Crushed Concrete Aggregate Waste in Stabilization of Clayey Soils for Sub-Base Pavement Construction, 2017. Search in Google Scholar

[13] TAYLOR, P. et al.: Recycling Concrete Pavement Materials. A Practitioner’s Reference Guide, 2018. Chapter 1, pp. 4. Search in Google Scholar

[14] ASTM: Annual Book of ASTM Standards, Section 4, Vol. 04.02, 04.08 and 04.09. West Conshohocken, 2003. Search in Google Scholar

[15] AKHTAR, A. – SARMAH, A. K.: Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective. J. Clean. Prod., 2018, 186, 262–281. Search in Google Scholar

[16] LEONG, H. Y. – ONG, D. E. L. – SANJAYAN, J. G. – NAZARI, A.: Strength Development of Soil–Fly Ash Geopolymer: Assessment of Soil, Fly Ash, Alkali Activators, and Water. J. Mater. Civ. Eng., 2018, 30, 04018171. Search in Google Scholar

[17] REDDY, M. L. – LINGESHWARAN, N.: Experimental investigation on performance of hollow brick with fly ash, cement and sand. Civil and Environmental Engineering, 2024, Vol. 20, Issue 1, 461–470. Search in Google Scholar

[18] AHMED, L. A. – ALBADRAN, F. A. J. – ALSAAD, Z. A. A. – FAROON, M. A.: Using the mats of palm fronds in reinforcement pavement layers. Civil and Environmental Engineering, 2023, Vol. 19, Issue 2, 714–723. Search in Google Scholar

[19] Standard specifications for roads and bridges (2003): The State Corporation for Roads and Bridges, Iraq. Search in Google Scholar

[20] American Association of State Highway and Transportation Officials (AASHTO): Standard Specifications for Transportation Materials and Methods of Sampling and Testing. Washington DC, 2013. Search in Google Scholar

[21] ASTM D4318-17: Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM International, West Conshohocken, PA, 2017. Available at: www.astm.org. Search in Google Scholar

[22] ASTM D854-14: Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. ASTM International, West Conshohocken, PA, 2014. Available at: www.astm.org. Search in Google Scholar

[23] ASTM D1883-16: Standard Test Method for California Bearing Ratio (CBR) of Laboratory. Search in Google Scholar

[24] ASTM D1557-12 (2021): Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³). ASTM International, West Conshohocken, PA, 2021. Available at: www.astm.org. Search in Google Scholar

[25] ASTM D4943-18: Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method. ASTM International, West Conshohocken, PA, 2018. Available at: www.astm.org. Search in Google Scholar

[26] AASHTO M 145-91 (2021): Standard Specification for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes. American Association of State and Highway Transportation Officials, 1991. Search in Google Scholar