<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper presents the results of variation in column spacing of a tube in its outer periphery concerning structural drift and cost optimization. For high rise structures, tubular framing and outrigger braced frames are considered as the most appropriate solution economically. In recent past not must study has been focused on the tubular frame in its columns spacing and span length. In this research, a simple square plan structure has been considered with different heights of 30, 40, and 50 story buildings. Six different framing systems of the tubular structure have been developed with different column spacing in each and employed to each high-rise structure. Concrete strength and steel yield strength has been taken as a fixed value for every model. Several models were developed with these combinations and the drift and structural safety have been optimized by reducing the cross-section sizes in each system. Seismic analysis has been carried out to evaluate the effects of varying column spacing in each tube. The comparison of all the employed systems was carried out and cost analysis has been made. Observations have been taken from drift, base shear, and cost analysis of each framing system of the tube, and certain results were concluded for structures with different height.</p></abstract>

This paper presents the results of variation in column spacing of a tube in its outer periphery concerning structural drift and cost optimization. For high rise structures, tubular framing and outrigger braced frames are considered as the most appropriate solution economically. In recent past not must study has been focused on the tubular frame in its columns spacing and span length. In this research, a simple square plan structure has been considered with different heights of 30, 40, and 50 story buildings. Six different framing systems of the tubular structure have been developed with different column spacing in each and employed to each high-rise structure. Concrete strength and steel yield strength has been taken as a fixed value for every model. Several models were developed with these combinations and the drift and structural safety have been optimized by reducing the cross-section sizes in each system. Seismic analysis has been carried out to evaluate the effects of varying column spacing in each tube. The comparison of all the employed systems was carried out and cost analysis has been made. Observations have been taken from drift, base shear, and cost analysis of each framing system of the tube, and certain results were concluded for structures with different height.

Implementing Different Tubular Framings on High-Rise Structures and Optimizing their Cost and Drift Control with an Optimum Column Spacing

Sir Syed University of Engineering & Technology

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This paper presents the results of variation in column spacing of a tube in its outer periphery concerning structural drift and cost optimization. For high...

Implementing Different Tubular Framings on High-Rise Structures and Optimizing their Cost and Drift Control with an Optimum Column Spacing

Online veröffentlicht: 16. Dez. 2020

Seitenbereich: 320 - 328

DOI: https://doi.org/10.2478/cee-2020-0032

Schlüsselwörter
Optimal column spacing, Tube framing systems, Cost analysis, Drift control, Base shear

© 2020 Saadat Malik et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Implementing Different Tubular Framings on High-Rise Structures and Optimizing their Cost and Drift Control with an Optimum Column Spacing

Online veröffentlicht: 16. Dez. 2020

Seitenbereich: 320 - 328

DOI: https://doi.org/10.2478/cee-2020-0032

SchlüsselwörterOptimal column spacing, Tube framing systems, Cost analysis, Drift control, Base shear

© 2020 Saadat Malik et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Optimal column spacing, Tube framing systems, Cost analysis, Drift control, Base shear