<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents the influence of impurities and alloying elements on the properties and characteristics of aluminum sheets. The researches were carried out on the Stucco aluminum sheet with dimensions of 120 × 50 × 85 mm, used to make billboards, roofs, containers, films, kitchenware, chemical equipment, vaporizers for refrigerators, etc. The sheet is made of non-alloyed aluminum, according to the EN-AW 1050 standard and belongs to the 1xxx class. The sheets have a high percentage of aluminum in their chemical composition, approximately 99.5%. The aim of the work was to subject the samples from this type of material to mechanical tensile stress and to measure their modulus of elasticity.</p>
</abstract>

The paper presents the influence of impurities and alloying elements on the properties and characteristics of aluminum sheets. The researches were carried out on the Stucco aluminum sheet with dimensions of 120 × 50 × 85 mm, used to make billboards, roofs, containers, films, kitchenware, chemical equipment, vaporizers for refrigerators, etc. The sheet is made of non-alloyed aluminum, according to the EN-AW 1050 standard and belongs to the 1xxx class. The sheets have a high percentage of aluminum in their chemical composition, approximately 99.5%. The aim of the work was to subject the samples from this type of material to mechanical tensile stress and to measure their modulus of elasticity.

Research on the Tensile Behavior of the Stucco Sheets

Scientific Bulletin of Valahia University - Materials and Mechanics

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Research on the Tensile Behavior of the Stucco Sheets"}

The paper presents the influence of impurities and alloying elements on the properties and characteristics of aluminum sheets. The researches were carried out...

Research on the Tensile Behavior of the Stucco Sheets

Online veröffentlicht: 11. Dez. 2023

Seitenbereich: 27 - 32

DOI: https://doi.org/10.2478/bsmm-2023-0015

Schlüsselwörter
aluminum sheets, alloying elements, tensile strength, modulus of elasticity

© 2023 Elena Valentina Stoian et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Research on the Tensile Behavior of the Stucco Sheets

Online veröffentlicht: 11. Dez. 2023

Seitenbereich: 27 - 32

DOI: https://doi.org/10.2478/bsmm-2023-0015

Schlüsselwörteraluminum sheets, alloying elements, tensile strength, modulus of elasticity

© 2023 Elena Valentina Stoian et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
aluminum sheets, alloying elements, tensile strength, modulus of elasticity