<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper actualizes earlier research in developing a pulse combustion technique for enhancing the efficacy of utility and industrial boilers and furnaces. Some unpublished results of the experimental investigation of self-sustained pulsating combustion of a gas fuel in an aerovalved pulse combustor (PC) are presented. Relationships have been established between all important design and operating parameters and the combustion characteristics. It was demonstrated that a well-designed pulse combustor can operate efficiently in a stable self-pumping regime in a wide range of operating conditions with the loading from 20% to 100% of the maximum power. While a PC can operate autonomously as a gas burner, the present focus is on their use for mitigating slug and ash deposits on heating surfaces of coal- or biomass fired power and industrial boilers, thus providing an alternative to the proven detonation pulse (DPC) or other techniques for on-line cleaning of heating surfaces during the operation of power and industrial boilers.</p>
</abstract>

The paper actualizes earlier research in developing a pulse combustion technique for enhancing the efficacy of utility and industrial boilers and furnaces. Some unpublished results of the experimental investigation of self-sustained pulsating combustion of a gas fuel in an aerovalved pulse combustor (PC) are presented. Relationships have been established between all important design and operating parameters and the combustion characteristics. It was demonstrated that a well-designed pulse combustor can operate efficiently in a stable self-pumping regime in a wide range of operating conditions with the loading from 20% to 100% of the maximum power. While a PC can operate autonomously as a gas burner, the present focus is on their use for mitigating slug and ash deposits on heating surfaces of coal- or biomass fired power and industrial boilers, thus providing an alternative to the proven detonation pulse (DPC) or other techniques for on-line cleaning of heating surfaces during the operation of power and industrial boilers.

Aerovalved Pulse Combustor for Enhancing Efficiency and Sustainability of Fossil Energy Conversion

B&H Electrical Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

The paper actualizes earlier research in developing a pulse combustion technique for enhancing the efficacy of utility and industrial boilers and furnaces....

Aerovalved Pulse Combustor for Enhancing Efficiency and Sustainability of Fossil Energy Conversion

Online veröffentlicht: 07. Dez. 2023

Seitenbereich: 53 - 60

Eingereicht: 30. Aug. 2023

Akzeptiert: 27. Nov. 2023

DOI: https://doi.org/10.2478/bhee-2023-0018

Schlüsselwörter
Pulse (aerovalved) combustor, Pulsating combustion, Low pollution, Device to clean energy boilers

© 2023 Izet Smajević et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Aerovalved Pulse Combustor for Enhancing Efficiency and Sustainability of Fossil Energy Conversion

Online veröffentlicht: 07. Dez. 2023

Seitenbereich: 53 - 60

Eingereicht: 30. Aug. 2023

Akzeptiert: 27. Nov. 2023

DOI: https://doi.org/10.2478/bhee-2023-0018

SchlüsselwörterPulse (aerovalved) combustor, Pulsating combustion, Low pollution, Device to clean energy boilers

© 2023 Izet Smajević et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
Pulse (aerovalved) combustor, Pulsating combustion, Low pollution, Device to clean energy boilers