Testing of Regulating and Non-Regulating Hydraulic Pumps

1ALIBOEV, B. A. 2016. Performance characteristics and wear pattern of precision parts of cotton tractor hydraulics. In Journal of Friction and Wear, vol. 37, pp. 83–85. DOI: https://doi.org/10.3103/S1068366616010025Search in Google Scholar

2BAROŠKA, J. 2012. Hydrostatic Mechanisms. Žilina : Hydropneutech, s. r. o., 388 pp. ISBN 9788097089726. (In Slovak)Search in Google Scholar

3BERGADA, J. M. – KUMAR, S. – DAVIES, D. L. – WATTON, J. 2012. A complete analysis of axial piston pump leakage and output flow ripples. In Applied Mathematical Modelling, vol. 36, no. 4, pp. 1731–1751. DOI: https://doi.org/10.1016/j.apm.2011.09.016Search in Google Scholar

4CASOLI, P. – VACCA, A. – FRANZONI, G. 2005. A numerical model for the simulation of external gear pumps. In Proceedings of the JFPS International Symposium on Fluid Power, vol. 2005, no. 6, pp. 705–710. DOI: https://doi.org/10.5739/isfp.2005.705Search in Google Scholar

5DOBROTA, D. – LALIĆ, B. – ORŠULIĆ, M. 2010. Experimental modeling of volumetric efficiency of high-pressure external gear pump. In Naše more, vol. 57, no. 5–6, pp. 235–240.Search in Google Scholar

6FANGWEI, X. – RUI, X. – GANG, S. – CUNTANG, W. 2017. Flow characteristics of accelerating pump in hydraulic-type wind power generation system under different wind speeds. In International Journal of Advanced Manufacturing Technology, vol. 92, pp. 189–196. DOI: https://doi.org/10.1007/s00170-017-0122-7Search in Google Scholar

7HAO, X. – ZHOU, X. – LIU, X. – SANG, X. 2016. Flow characteristics of external gear pumps considering trapped volume. In Advances in Mechanical Engineering, vol. 8, no. 10, pp. 1–10. DOI: https://doi.org/10.1177/1687814016674100Search in Google Scholar

8HUJO, Ľ. – NOSIAN, J. – BOROWSKI, S. – MARKIEWICZ-PATALON, M. – TOMIĆ, M. – KOŽUCH, P. 2022. Design of a laboratory test equipment for measuring and testing mobile energy means with simulation of operating conditions. In Processes, vol. 10, no. 8, article no. 1435. DOI: https://doi.org/10.3390/pr10081435Search in Google Scholar

9HRYCIÓW, Z. – RYBAK, P. – GIELETA, R. 2021. The influence of temperature on the damping characteristic of hydraulic shock absorbers. In Eksploatacja i Niezawodność – Maintenance and Reliability, vol. 23, no. 2, pp. 346–351. DOI: https://doi.org/10.17531/ein.2021.2.14Search in Google Scholar

10CHANGBIN, G. – ZONGXIA, J. – CHOUZHAN, H. 2014. Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate. In Chinese Journal of Aeronautics, vol. 27, no. 1, pp. 169–181. DOI: https://doi.org/10.1016/j.cja.2013.07.044Search in Google Scholar

11INAGUMA, Y. – YOSHIDA, N. 2013. Mathematical analysis of influence of oil temperature on efficiencies in hydraulic pumps for automatic transmissions. In SAE International Journal of Passenger Cars: Mechanical Systems, vol. 6, no. 2, pp. 786–797. DOI: https://doi.org/10.4271/2013-01-0820Search in Google Scholar

12INAGUMA, Y. 2012. Oil temperature influence on friction torque characteristics in hydraulic pumps. In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 226, no. 9, pp. 2267–2280. DOI: https://doi.org/10.1177/0954406211430572Search in Google Scholar

13KIM, J. H. – KIM, S. G. 2013. The flow rate characteristics of external gear pump for EHPS. In 2013 4^th International Conference on Intelligent Systems, Modelling and Simulation, 29–31 January, Bangkok, Thailand, pp. 346–349. DOI: https://doi.org/10.1109/ISMS.2013.113Search in Google Scholar

14KOSIBA, J. 2017. Evaluation of Degradation Processes of Biodegradable Fluids. Habilitation thesis. Nitra : Slovak University of Agriculture in Nitra, 146 pp.Search in Google Scholar

15KOSIBA, J. – HUJO, Ľ. – TULÍK, J. – RAŠO, M. 2013. Study of the impact of synthetic fluid on the lifetime of hydraulic pump. In Advanced Materials Research, vol. 801, pp. 7–12. DOI: https://doi.org/10.4028/www.scientific.net/AMR.801.7Search in Google Scholar

16KOSIBA, J. – TKÁČ, Z. – JABLONICKÝ, J. – SHCHERBAK, V. – GANUSHCHAK-YEFIMENKO, L. – PAUMER, M. – BUKOROS, T. – ČURGALIOVÁ, G. – ZACHAR, M. 2022. Experimental testing of the influence of the operating loading on the flow characteristics of hydraulic pump. In Eksploatacja i Niezawodność – Maintenance and Reliability, vol. 24, no. 2, pp. 583–589. DOI: https://doi.org/10.17531/ein.2022.3.19Search in Google Scholar

17KUČERA, M. – ALEŠ, Z. 2017. Morphology analysis of friction particles generated in tractor transmission oils. In Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62. DOI: https://doi.org/10.1515/ata-2017-0012Search in Google Scholar

18KUČERA, M. – HNILICOVÁ, M. 2022. Changes in the key physicochemical parameters and selected trace elements of oil due to its use in hydraulic system of woodworking equipment. In Acta Technologica Agriculturae, vol. 25, no. 3, pp. 137–143. DOI: https://doi.org/10.2478/ata-2022-0021Search in Google Scholar

19MURRENFOFF, H. 2014. Showing the future-oriented new ways and solutions. In Ölhydraulik und Pneumatik, vol. 58, no. 1–2, pp. 10–13.Search in Google Scholar

20RANA, D. A. 2015. Performance evaluation of external gear pump with the used of burnt oil. In International Journal of Advanced Technology in Engineering and Science, vol. 3, no. 1, pp. 466–473.Search in Google Scholar

21NEDELJKOVIC, M. S. – CANTRAK, D. S. – JANKOVIC, N. Z. – ILIC, D. B. – MATIJEVIC, M. S. 2018. Virtual instruments and experiments in engineering education lab setup with hydraulic pump. In 2018 IEEE Global Engineering Education Conference (EDUCON), Santa Cruz de Tenerife, Spain, pp. 1139–1146. DOI: https://doi.org/10.1109/EDUCON.2018.8363358Search in Google Scholar

22RENN, J. C. – TSAI, C. 2005 Development of an unconventional electro-hydraulic proportional valve with fuzzy-logic controller for hydraulic presses. In International Journal of Advanced Manufacturing Technology, vol. 26, pp. 10–16. DOI: https://doi.org/10.1007/s00170-003-1973-7Search in Google Scholar

23SIGLOCH, H. 2009. Engineering Fluidmechanics. Berlin : Springer-Verlag, 581 pp. ISBN 978-3-642-03089-5 (In German: Technische Fluidmechanik)Search in Google Scholar

24TKÁČ, Z. – KOSIBA, J. – HUJO, Ľ. – JABLONICKÝ, J. – NOSIAN, J. 2018. Experimental hydraulic device for the testing of hydraulic pumps and liquids. In Tribology in Industry, vol. 40, no. 1, pp. 149–155. DOI: https://doi.org/10.24874/ti.2018.40.01.14Search in Google Scholar

25TRIVEDY, H. K. – BHATT, D. V. 2017. Effect of lubricating oil on tribological behaviour in pin on disc test rig. In Tribology in Industry, vol. 39, no. 1, pp. 90–99. DOI: https://doi.org/10.24874/ti.2017.39.01.10Search in Google Scholar

26TOTTEM, G. E. – DE NEGRI, V. J. 2012. Handbook of Hydraulic Fluid Technology. Boca Raton, Florida : Taylor & Francis Group, 982 pp. ISBN 9780429092848Search in Google Scholar

27WILL, D. – GEBHARDT, N. 2011. Hydraulics. Heidelberg : Springer Berlin, 511 pp. ISBN 978-3-642-17243-4. (In German: Hydraulik). DOI: https://doi.org/10.1007/978-3-642-17243-4Search in Google Scholar

28WU, D. – YAO, J. – HUANG, Y. J. 2012. Study on the speed control system of hydraulic pump-motor based on PID neural network. In Advanced Materials Research, vol. 542–543, pp. 759–764. DOI: https://doi.org/10.4028/www.scientific.net/AMR.542-543.759Search in Google Scholar