[
ABDULKAREEM, S. A. – ADENIYI, A. G. 2017. Production of particleboards using polystyrene and bamboo wastes. In Nigerian Journal of Technology, vol. 36, no. 3, pp. 788–793.
]Search in Google Scholar
[
AHMED, E. – DAS, A. K. – HANNAN, M. O. – SHAMS, M. I.2016. Particleboards from coir pith. In Bangladesh Journal of Science and Industrial Residues, vol. 52, no. 3, pp. 239–245.
]Search in Google Scholar
[
AKINDAPO, J. O. – BINNI, A. U. – SANUSI, O. M. 2015. Development of roofing sheet materials using groundnut shell particles and epoxy resin as composite material. In American Journal of Engineering Research, vol. 4, no. 6, pp. 165–173.
]Search in Google Scholar
[
AKINYEMI, A. B – AFOLAYAN, J. O. – OLUWATOBI, E. O. 2016. Some properties of composite corn cob and sawdust particle boards. In Construction and Building Materials, vol. 127, pp. 436–441.
]Search in Google Scholar
[
AKINYEMI, B. A. – OKONKWO, C. E. – ALHASSAN, E. A. – AJIBOYE, M. 2019a. Durability and strength properties of board from polystyrene-wood wastes. In Journal of Material Cycles and Waste Management, vol. 21, no. 6, pp. 1541–1549.
]Search in Google Scholar
[
AKINYEMI, B. A. – OLAMIDE, O. – OLUWASOGO, D. 2019b. Formaldehyde free particleboards from wood chips wastes using modified cassava starch as binder. In Case Studies in Construction Materials, vol. 11, e00236.
]Search in Google Scholar
[
AKINYEMI, B. – OMONIYI, T. E. – ELEMILE, O. – OLUWAFEMI, A. 2020. Innovative husk-crete building materials from rice chaff and modified cement mortars. In Acta Technologica Agriculturae, vol. 23, no. 2, pp. 67–72.
]Search in Google Scholar
[
AMENAGHAWON, N. A. – OGBEIDE, S. E. – OKIEIMEN, C. O. 2014. Application of statistical experimental design for the optimization of dilute sulphuric acid hydrolysis of cassava bagasse. In Acta Polytechnica Hungarica, vol. 11, pp. 239–250.
]Search in Google Scholar
[
AMENAGHAWON, N. A. – OSAYUKI-AGUEBOR, W. – OKIEIMEN, C. O. 2016. Production of particle boards from corncobs and cassava stalks: optimization of mechanical properties using response surface methodology. In Journal of Materials and Environmental Science, vol. 7, no. 4, pp. 1236–1244.
]Search in Google Scholar
[
ASTM C177-97. 1999. Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus. American Society for Testing and Materials.
]Search in Google Scholar
[
ANSI A208.1. 2009. Particleboard. American national standard. National Particleboard Association. Retrieved from www. bc.com/.../2014-Boise-CascadePB-vs-ANSI-A208-1-2009.
]Search in Google Scholar
[
ATUANYA, C. U. – OBELE, C. M. 2016. Optimization of process parameter for sawdust/recycled polyethylene composites. In Journal of Minerals and Materials Characterization and Engineering, vol. 4, pp. 270–277.
]Search in Google Scholar
[
BABATUNDE, B. – OLUFEMI, D. 2011. Properties of cement-bonded flake boards from Gmelina arborea and Leucaena leucocephala. In International Journal of Biological Chemical Science, vol. 5, no. 2, pp. 586–594.
]Search in Google Scholar
[
BEKTAS, I. – GULER, C. – KALAYCIOGLU, H. – MENGELOGLU, F. – NACAR, M. 2005. The manufacture of particleboards using sunflower stalks (Helianthus annus I.) and poplar wood (Populus alba L). In Journal of Composite Material, vol. 39, no. 5, pp. 467–473.
]Search in Google Scholar
[
CAO, G. – REN, N. – WANG, A. – LEE, D. J. – GUO, W. – LIU, B. – FENG, Y. – ZHAO, Q. 2009. Acid hydrolysis of corn stover for biohydrogen production using Thermoanaerobacterium thermosaccharolyticum W16. In International Journal of Hydrogen Energy, vol. 34, no. 17, pp. 7182–7188.
]Search in Google Scholar
[
DERKYI, N. – SEKYERE, D. – DARKWA, N. A. – YARTEY, J. G. 2008. Effect of cassava flour as urea-formaldehyde adhesive extender on the bonding strength of plywood. In Ghana Journal of Forestry, vol. 23, pp. 25–34.
]Search in Google Scholar
[
EZENWA, O. N. – OBIKA, E. N. – UMEMBAMALU, C. – NWOYE, F. C. 2019. Development of ceiling board using breadfruit seed coat and recycled low density polyethylene. In Heliyon, vol. 5, no. 11, e02712.
]Search in Google Scholar
[
FIORELLI, J. – SETORI, D. L. – CRAVO, J. C. M. – SAVASTANO, H. – ROSSIGNOLO, J. A. – NASCIMENTO, M. F. 2016. Sugarcane baggase and castor oil polyurethane adhesive-based composite. In Materials Research, vol. 16, no. 2, pp. 439–446.
]Search in Google Scholar
[
CHIBUDIKE, H. O. – ANYAKORA, A. N. – ANYAKORA, A. N. – SULEIMAN, M. A. 2011. Utilization of bamboo in the production of ceiling board. In Journal of Engineering Research, vol. 16, no. 1, pp. 1–10.
]Search in Google Scholar
[
IDRIS, U. D. – AIGBODION, V. S. –ATANYA, C. U. – ABDULLAHI, J. 2011. Eco-friendly (watermelon peels): alternatives to wood-based particleboard composites. In Tribology in Industry, vol. 33 no. 4, pp. 173–181.
]Search in Google Scholar
[
MADU, O. – NWANKWOJIKE, B. N. –ANI, O. I. 2018. Optimal design for rice husk-saw dust reinforced polyester ceiling board. In American Journal of Engineering Research, vol. 7, no. 6, pp. 11–16.
]Search in Google Scholar
[
MATÍAS, J. – CRUZ, V. – GARCÍA, A. – GONZÁLEZ, D. 2019. Evaluation of rice straw yield, fibre composition and collection under Mediterranean conditions. In Acta Technologica Agriculturae, vol. 22, no. 2, pp. 43–47.
]Search in Google Scholar
[
MENDES, R. F. – MENDES, L. M. – JUNIOR, J. B. G. – SANTOS, R. C. D. – BUFALINO, L. 2009. The adhesive effect on the properties of particleboards made from sugar cane, bagasse generated in the distiller. In Revista de Ciências Agrárias, vol. 32, no. 2, pp. 209–218.
]Search in Google Scholar
[
MONTGOMERY, D. C. 2005. Design and Analysis of Experiments. 6th ed., New York: John Wiley & Sons, Inc.
]Search in Google Scholar
[
MURAKAMI, K. K. – UEDA, M. – MATSUDA, H. – ZHANG, M. – KAWASAKI, T. – KAWAI, S. 1999. Manufacture and properties of three-layered particleboards with oriented face strands of veneers. In Journal of the Japan Wood Research Society, vol. 45, no. 5, p. 395–402.
]Search in Google Scholar
[
OLORUNMAIYE, J. A. – OHIJEAGBON, J. A. 2015. Retrofitting composite ceiling boards with Jatropha curcas seedcake material. In Production Engineering, vol. 18, no. 2, pp. 96–102.
]Search in Google Scholar
[
SARKAR, M. – ASHADUZZAMAN, M. – DAS, A. K – SHAMS, M. I. – HANNAN, M. O. 2012. Mechanical properties and dimensional stability of cement bonded particleboard made from saw dust and rice husk. In Bangladesh Journal of Scientific and Industrial Research, vol. 47, no. 3, pp. 273–278.
]Search in Google Scholar
[
SEKALUVU, L. – TUMUTEGYEREIZE, P. – KIGGUNDU, N. 2014. Investigation of factors affecting the production and properties of maize cob-particleboards. In Waste and Biomass Valorization, vol. 5, no. 1, pp. 27–32.
]Search in Google Scholar
[
SOTANNDE, O. A. – OLUWADARE, A. O. – OGEDOH, O. – ADEOGUN, P. F. 2012. Evaluation of cement-bonded particle board produced from Afzelia africana wood residues. In Journal of Engineering Science and Technology, vol. 6, no. 7, pp. 732–743.
]Search in Google Scholar
[
SULEIMAN, I. Y. 2013. Development of eco-friendly particleboard composites using rice husk particles and gum Arabic. In Journal of Materials Science and Engineering with Advanced Technology, vol. 7, no. 1, pp. 75–91.
]Search in Google Scholar
[
VILLAMIZAR, M. C. N. – ARAQUE, V. S. – REYES, C. A. R. – SILVA, R. S. 2012. Effect of the addition of coal-ash and cassava peels on the engineering properties of compressed earth blocks. In Construction and Building Materials, vol. 36, pp. 276–286.
]Search in Google Scholar