<abstract xmlns="http://www.w3.org/1999/xhtml"> The paper presents the main drawbar parameters of tractor (drawbar pull, drawbar power and wheels slip) operating in a grass plot and evaluates the utilization of specially modified tyres with spikes. These prototypes of driving wheels were designed at the Department of Transport and Handling of the Slovak University of Agriculture in Nitra. The designed mechanism with spikes is mounted on standard tractor tyres, in which grooves were made. Spikes are hidden in grooves during transportation on a route. On the grassy landscape or soil, the spikes are ejected in order to improve the drawbar parameters. During operation, the drawbar pull and the rotation speeds of wheels were measured, whereupon the wheel slip was calculated. Results show the highest increase in tractor speed at the second gear and high load in utilized prototypes of the driving wheels (1.89 km·h-1) in comparison to standard tyres (1.10 km·h-1). Measurements also demonstrate the highest improvement of drawbar power under the aforementioned conditions in case of tractor with prototypes of driving wheels (1,719.87 W) in comparison with tractor using the standard tyres (1,061.57 W).</abstract>

The paper presents the main drawbar parameters of tractor (drawbar pull, drawbar power and wheels slip) operating in a grass plot and evaluates the utilization of specially modified tyres with spikes. These prototypes of driving wheels were designed at the Department of Transport and Handling of the Slovak University of Agriculture in Nitra. The designed mechanism with spikes is mounted on standard tractor tyres, in which grooves were made. Spikes are hidden in grooves during transportation on a route. On the grassy landscape or soil, the spikes are ejected in order to improve the drawbar parameters. During operation, the drawbar pull and the rotation speeds of wheels were measured, whereupon the wheel slip was calculated. Results show the highest increase in tractor speed at the second gear and high load in utilized prototypes of the driving wheels (1.89 km·h-1) in comparison to standard tyres (1.10 km·h-1). Measurements also demonstrate the highest improvement of drawbar power under the aforementioned conditions in case of tractor with prototypes of driving wheels (1,719.87 W) in comparison with tractor using the standard tyres (1,061.57 W).

Drawbar Parameters of Tractor with Prototypes of Driving Wheels and Standard Tyres

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The paper presents the main drawbar parameters of tractor (drawbar pull, drawbar power and wheels slip) operating in a grass plot and evaluates the utilization...

Drawbar Parameters of Tractor with Prototypes of Driving Wheels and Standard Tyres

Online veröffentlicht: 29. Juni 2018

Seitenbereich: 63 - 68

DOI: https://doi.org/10.2478/ata-2018-0012

Schlüsselwörter
wheels slip, drawbar pull, tractor power, loss of energy

© 2018 Rudolf Abrahám, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Drawbar Parameters of Tractor with Prototypes of Driving Wheels and Standard Tyres

Online veröffentlicht: 29. Juni 2018

Seitenbereich: 63 - 68

DOI: https://doi.org/10.2478/ata-2018-0012

Schlüsselwörterwheels slip, drawbar pull, tractor power, loss of energy

© 2018 Rudolf Abrahám, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
wheels slip, drawbar pull, tractor power, loss of energy