<abstract xmlns="http://www.w3.org/1999/xhtml">Introduction: X-ray radio imaging is commonly used because most diseases in the oral area can only be diagnosed by using this method. Proper identification of elements on a radiological image may also be difficult due to errors that may occur before, during or after the X-ray. These errors are called artifacts.Aim of the study: The aim of our study is to distinguish the artifacts that can occur on two-dimensional and three-dimensional dental X-rays (intraoral or extraoral) from the actual pathology of the investigated area, by performing control X-rays.Material and Methods: In our study we viewed, assessed and compared a number of 80 retroalveolar X-rays, 45 orthopantomographs (OPG) and 35 Cone Beam Computer Tomography (CBCT). In case of artifacts or errors, X-rays were repeated within 5 days or a CBCT was performed. In the case of OPGs, another option was to perform retroalveolar X-rays to establish the final diagnosis.Results: From a total of 80 retroalveolar X-rays, in 13 cases (16.25%) we found artifacts. Of these, in only 4 cases (5%) diagnosis and treatment plan were changed following a clinical examination or a CBCT. In the case of OPGs, out of a total of 45 OPGs, 17 (37.7%) presented artifacts, but only in a percentage of 17.7% (8 cases) they affected the diagnosis. Of the 35 CBCTs, in 10 of them (28.57%) prosthetic works with a metal component or implants were present, with specific artifacts found, but their presence did not influence the diagnosis.Conclusion: It is necessary for doctors to know the anatomy of the oral region, the most fervent appearance of the components and the different types of artifacts that may occur. Control X-ray is a very commonly used possibility, but there are cases where radiation exposure needs to be minimized.</abstract>

Introduction: X-ray radio imaging is commonly used because most diseases in the oral area can only be diagnosed by using this method. Proper identification of elements on a radiological image may also be difficult due to errors that may occur before, during or after the X-ray. These errors are called artifacts.Aim of the study: The aim of our study is to distinguish the artifacts that can occur on two-dimensional and three-dimensional dental X-rays (intraoral or extraoral) from the actual pathology of the investigated area, by performing control X-rays.Material and Methods: In our study we viewed, assessed and compared a number of 80 retroalveolar X-rays, 45 orthopantomographs (OPG) and 35 Cone Beam Computer Tomography (CBCT). In case of artifacts or errors, X-rays were repeated within 5 days or a CBCT was performed. In the case of OPGs, another option was to perform retroalveolar X-rays to establish the final diagnosis.Results: From a total of 80 retroalveolar X-rays, in 13 cases (16.25%) we found artifacts. Of these, in only 4 cases (5%) diagnosis and treatment plan were changed following a clinical examination or a CBCT. In the case of OPGs, out of a total of 45 OPGs, 17 (37.7%) presented artifacts, but only in a percentage of 17.7% (8 cases) they affected the diagnosis. Of the 35 CBCTs, in 10 of them (28.57%) prosthetic works with a metal component or implants were present, with specific artifacts found, but their presence did not influence the diagnosis.Conclusion: It is necessary for doctors to know the anatomy of the oral region, the most fervent appearance of the components and the different types of artifacts that may occur. Control X-ray is a very commonly used possibility, but there are cases where radiation exposure needs to be minimized.

Contributions to the study of common artifacts and errors in conventional and three-dimensional radio-imaging used in the evaluation of odontal, endodontic and periodontal pathology.

George Emil Palade University of Medicine, Pharmacy, Science, and Technology of Targu-Mures

Acta Stomatologica Marisiensis Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Introduction: X-ray radio imaging is commonly used because most diseases in the oral area can only be diagnosed by using this method. Proper identification of...

Contributions to the study of common artifacts and errors in conventional and three-dimensional radio-imaging used in the evaluation of odontal, endodontic and periodontal pathology.

Online veröffentlicht: 14. Dez. 2020

Seitenbereich: 9 - 17

Eingereicht: 21. Juli 2020

Akzeptiert: 28. Aug. 2020

DOI: https://doi.org/10.2478/asmj-2020-0009

Schlüsselwörter
retroalveolar X-ray, orthopantomography, CBCT, artifact, oral diagnosis

© 2020 Diana-Florina Kulcsar et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Contributions to the study of common artifacts and errors in conventional and three-dimensional radio-imaging used in the evaluation of odontal, endodontic and periodontal pathology.

Online veröffentlicht: 14. Dez. 2020

Seitenbereich: 9 - 17

Eingereicht: 21. Juli 2020

Akzeptiert: 28. Aug. 2020

DOI: https://doi.org/10.2478/asmj-2020-0009

Schlüsselwörterretroalveolar X-ray, orthopantomography, CBCT, artifact, oral diagnosis

© 2020 Diana-Florina Kulcsar et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
retroalveolar X-ray, orthopantomography, CBCT, artifact, oral diagnosis