<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Laser melting technology is a new surface fabrication technique, and using laser beams to improve the mechanical properties of iron-based amorphous prepared by laser melting has become a hot topic in current materials research. Firstly, nickel-plated carbon nanotubes were used to improve the toughness of iron-based amorphous coatings, and nickel-plated carbon nanotubes were used to prepare iron-based amorphous composite fusion cladding layers. Then, the iron-based amorphous has good strength, strong wear resistance and corrosion resistance and is a good surface modification material. Finally, considering that the preparation of iron-based amorphous coating by laser melting technology can meet the preparation requirements of fast cooling of iron-based amorphous, the organization and mechanical properties of the iron-based amorphous coating are studied and analyzed by using laser melting technology. The results show that the toughness of the amorphous-1.00 wt% nickel-plated carbon nanotube composite clad layer is 7.67 MPa-m which is 33.4% higher than the amorphous clad layer. The composite clad layer with the addition of carbon nanotubes showed a significant increase in toughness without a significant decrease in hardness, and the prepared nickel-plated carbon nanotube/amorphous composite clad layer had better overall mechanical properties. This study improves the mechanical properties of iron-based amorphous coatings, which is important to improve the problems of decreasing service life and stability of equipment and components caused by corrosion and wear.</p>
</abstract>

Laser melting technology is a new surface fabrication technique, and using laser beams to improve the mechanical properties of iron-based amorphous prepared by laser melting has become a hot topic in current materials research. Firstly, nickel-plated carbon nanotubes were used to improve the toughness of iron-based amorphous coatings, and nickel-plated carbon nanotubes were used to prepare iron-based amorphous composite fusion cladding layers. Then, the iron-based amorphous has good strength, strong wear resistance and corrosion resistance and is a good surface modification material. Finally, considering that the preparation of iron-based amorphous coating by laser melting technology can meet the preparation requirements of fast cooling of iron-based amorphous, the organization and mechanical properties of the iron-based amorphous coating are studied and analyzed by using laser melting technology. The results show that the toughness of the amorphous-1.00 wt% nickel-plated carbon nanotube composite clad layer is 7.67 MPa-m which is 33.4% higher than the amorphous clad layer. The composite clad layer with the addition of carbon nanotubes showed a significant increase in toughness without a significant decrease in hardness, and the prepared nickel-plated carbon nanotube/amorphous composite clad layer had better overall mechanical properties. This study improves the mechanical properties of iron-based amorphous coatings, which is important to improve the problems of decreasing service life and stability of equipment and components caused by corrosion and wear.

Histological and mechanical properties of laser-melted carbon nanotube-toughened Fe-based amorphous coatings

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

Laser melting technology is a new surface fabrication technique, and using laser beams to improve the mechanical properties of iron-based amorphous prepared by...

Histological and mechanical properties of laser-melted carbon nanotube-toughened Fe-based amorphous coatings

Online veröffentlicht: 02. Sept. 2023

Seitenbereich: -

Eingereicht: 15. Sept. 2022

Akzeptiert: 13. März 2022

DOI: https://doi.org/10.2478/amns.2023.2.00276

Schlüsselwörter
Laser melting technology, Nickel-plated carbon nanotubes, Iron-based amorphous coatings, Toughness, Hardness, Mechanical properties

© 2023 Ximing Zhu, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Histological and mechanical properties of laser-melted carbon nanotube-toughened Fe-based amorphous coatings

Online veröffentlicht: 02. Sept. 2023

Seitenbereich: -

Eingereicht: 15. Sept. 2022

Akzeptiert: 13. März 2022

DOI: https://doi.org/10.2478/amns.2023.2.00276

SchlüsselwörterLaser melting technology, Nickel-plated carbon nanotubes, Iron-based amorphous coatings, Toughness, Hardness, Mechanical properties

© 2023 Ximing Zhu, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
Laser melting technology, Nickel-plated carbon nanotubes, Iron-based amorphous coatings, Toughness, Hardness, Mechanical properties