<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, a numerical study of forced convection on a backward facing step containing a single-finned fixed cylinder has been performed, using a ferrofluid and external magnetic field with different inclinations. The partial differential equations, which determine the conservation equations for mass, momentum and energy, were solved using the finite element scheme based on Galerkin’s method. The analysis of heat transfer characteristics by forced convection was made by taking different values of the Reynolds number (Re between 10 and 100), Hartmann number (Ha between 0 and 100), nanoparticles concentration (<italic>φ</italic> between 0 and 0.1) and magnetic field inclination (<italic>γ</italic> between 0° and 90°); also, several fin positions α [0°–180°] were taken in the counter clockwise direction by a step of 5. After analysing the results, we concluded that Hartmann number, nanoparticles concentration, Reynolds number and magnetic field angles have an influence on the heat transfer rate. However, the fin position on the cylinder has a big impact on the Nusselt number and therefore on heat transfer quality. The best position of the fin is at (<italic>α</italic> = 150°), which gives the best Nusselt number and therefore the best heat transfer, but the fin position at (<italic>α</italic> = 0°) remains an unfavourable case that gives the lowest Nusselt values.</p>
</abstract>

In this paper, a numerical study of forced convection on a backward facing step containing a single-finned fixed cylinder has been performed, using a ferrofluid and external magnetic field with different inclinations. The partial differential equations, which determine the conservation equations for mass, momentum and energy, were solved using the finite element scheme based on Galerkin’s method. The analysis of heat transfer characteristics by forced convection was made by taking different values of the Reynolds number (Re between 10 and 100), Hartmann number (Ha between 0 and 100), nanoparticles concentration (φ between 0 and 0.1) and magnetic field inclination (γ between 0° and 90°); also, several fin positions α [0°–180°] were taken in the counter clockwise direction by a step of 5. After analysing the results, we concluded that Hartmann number, nanoparticles concentration, Reynolds number and magnetic field angles have an influence on the heat transfer rate. However, the fin position on the cylinder has a big impact on the Nusselt number and therefore on heat transfer quality. The best position of the fin is at (α = 150°), which gives the best Nusselt number and therefore the best heat transfer, but the fin position at (α = 0°) remains an unfavourable case that gives the lowest Nusselt values.

MHD Forced Convection Using Ferrofluid Over a Backward Facing Step Containing a Finned Cylinder

Laboratory of Maritime Sciences and Engineering LSIM Faculty of Mechanical Engineering

University of Science and Technology of Oran

Mechanics, Modeling and Experimentation Laboratory L2ME, Faculty of Sciences and Technology

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this paper, a numerical study of forced convection on a backward facing step containing a single-finned fixed cylinder has been performed, using a...

MHD Forced Convection Using Ferrofluid Over a Backward Facing Step Containing a Finned Cylinder

Online veröffentlicht: 04. Feb. 2022

Seitenbereich: 70 - 81

Eingereicht: 21. Sept. 2021

Akzeptiert: 02. Dez. 2021

DOI: https://doi.org/10.2478/ama-2022-0009

Schlüsselwörter
fin positions, forced convection, nanoparticles, heat transfer, finned cylinder, magneto-hydrodynamic, backward facing step

© 2022 Meriem Toumi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

MHD Forced Convection Using Ferrofluid Over a Backward Facing Step Containing a Finned Cylinder

Online veröffentlicht: 04. Feb. 2022

Seitenbereich: 70 - 81

Eingereicht: 21. Sept. 2021

Akzeptiert: 02. Dez. 2021

DOI: https://doi.org/10.2478/ama-2022-0009

Schlüsselwörterfin positions, forced convection, nanoparticles, heat transfer, finned cylinder, magneto-hydrodynamic, backward facing step

© 2022 Meriem Toumi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
fin positions, forced convection, nanoparticles, heat transfer, finned cylinder, magneto-hydrodynamic, backward facing step