<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The article reports on a device for book block spines processing that was designed and assembled on a perfect binding machine Trendbinder. The article shows workability of designed device. The authors have developed a methodology for the experimental study of the tractive effort of chain conveyors by technological load, the wireless module for data measurement and software for its processing. Extensive coverage is given to experimental research of the tractive effort of chain conveyors during book block spine processing depending on book block velocity, type of paper from which they are made and setting angle of cylindrical milling cutter relatively to direction of book blocks movement. The authors have examined the change in the tractive effort. The article experimentally confirms that sluggishness of chain drive causes vibration of the tractive effort. This effect can be observed during free-running movement of chain with carriers of perfect binding machine as well as during technological load influence. The article describes that between research parameters the setting angle of cylindrical milling cutter has the main impact relatively on the direction of book blocks movement.</p></abstract>

The article reports on a device for book block spines processing that was designed and assembled on a perfect binding machine Trendbinder. The article shows workability of designed device. The authors have developed a methodology for the experimental study of the tractive effort of chain conveyors by technological load, the wireless module for data measurement and software for its processing. Extensive coverage is given to experimental research of the tractive effort of chain conveyors during book block spine processing depending on book block velocity, type of paper from which they are made and setting angle of cylindrical milling cutter relatively to direction of book blocks movement. The authors have examined the change in the tractive effort. The article experimentally confirms that sluggishness of chain drive causes vibration of the tractive effort. This effect can be observed during free-running movement of chain with carriers of perfect binding machine as well as during technological load influence. The article describes that between research parameters the setting angle of cylindrical milling cutter has the main impact relatively on the direction of book blocks movement.

Experimental Evaluation of the Tractive Effort of the Chain Conveyor During Book Block Spine Processing by Cylindrical Milling Cutter at Perfect Binding

Faculty of Computer Printing Engineering, Department of Computerized Complexes of Printing and Packaging Industries

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The article reports on a device for book block spines processing that was designed and assembled on a perfect binding machine Trendbinder. The article shows...

Experimental Evaluation of the Tractive Effort of the Chain Conveyor During Book Block Spine Processing by Cylindrical Milling Cutter at Perfect Binding

Online veröffentlicht: 25. Juli 2019

Seitenbereich: 101 - 106

Eingereicht: 16. Mai 2018

Akzeptiert: 19. Juni 2019

DOI: https://doi.org/10.2478/ama-2019-0014

Schlüsselwörter
tractive effort, cylindrical milling cutter, chain conveyor, book block, perfect binding

© 2019 Oleh Knysh et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Experimental Evaluation of the Tractive Effort of the Chain Conveyor During Book Block Spine Processing by Cylindrical Milling Cutter at Perfect Binding

Online veröffentlicht: 25. Juli 2019

Seitenbereich: 101 - 106

Eingereicht: 16. Mai 2018

Akzeptiert: 19. Juni 2019

DOI: https://doi.org/10.2478/ama-2019-0014

Schlüsselwörtertractive effort, cylindrical milling cutter, chain conveyor, book block, perfect binding

© 2019 Oleh Knysh et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
tractive effort, cylindrical milling cutter, chain conveyor, book block, perfect binding