[1. Bolelli G. (2009), HVOF-sprayedWC-CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties, Wear, Vol. 267, 944-953.]Search in Google Scholar
[2. Bolelli G. et al. (2007), Microstructural and tribological comparison of HVOF-sprayed and post-treated M-Mo-Cr-Si (M=Co, Ni) alloy coatings, Wear, Vol. 263, 1397-1416.]Search in Google Scholar
[3. Bolelli G., Lusvarghi L., Barletta M. (2009), HVOF-sprayedWC- CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties, Wear, Vol. 267, 944-953.]Search in Google Scholar
[4. Fang W. (2009), Processing optimization, surface properties and wear behavior of HVOF spraying WC-CrC-Ni coating, Journal of Materials Processing Technology, Vol. 209, 3561-3567.]Search in Google Scholar
[5. González-Hermosilla W. A. et al. (2010), Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC-10Co-4Cr cermet, deposited by HVOF thermal spray, Materials Science and Engineering A, Vol. 527, 6551-6561.]Search in Google Scholar
[6. Hadad M. et al. (2008), Adhesion evaluation of multilayered based WC-Co-Cr thermally sprayed coatings, Surface and Coatings Technology, Vol. 202, 4399-4405.]Search in Google Scholar
[7. Lee C.W., Han J.H., Yoon J., Shin M.C., Kwun S.I. (2010), A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF, Surface and Coatings Technology, Vol. 204, 2223-2229.]Search in Google Scholar
[8. Lee C.W., Han J.H., Yoon J., Shin M.C., Kwun S.I. (2010), A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF, Surface and Coatings Technology, Vol. 204, 2223-2229.]Search in Google Scholar
[9. Maiti A.K., Mukhopadhyay N., Raman R. (2007), Effect of adding WC powder to the feedstock of WC-Co-Cr based HVOF coating and its impact on erosion and abrasion resistance, Surface and Coatings Technology, Vol. 201, 7781-7788.]Search in Google Scholar
[10. Ramesh M.R. et al. (2010), Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings, Wear, Vol. 269 197-205.]Search in Google Scholar
[11. Sahraoui T., Guessasma S., Fenineche N. E., Montavon G., Coddet C. (2004), Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation, Materials Letters, Vol. 58, 654-660.]Search in Google Scholar
[12. Sidhu H. S., Sidhu B. S., Prakash S. (2006), Mechanical and microstructural properties of HVOF sprayed WC-Co and Cr3C2-NiCr coatings on the boiler tube steels using LPG as the fuel gas, Journal of Materials Processing Technology, Vol. 171, 77-82.]Search in Google Scholar
[13. Tan J.C., Looney L., Hashmi M.S.J. (1999), Component repair using HVOF thermal spraying, Journal of Materials Processing Technology, Vol. 92-93, 203-208.]Search in Google Scholar
[14. Thakur L., Arora N., Jayaganthan R., Sood R. (2011), An investigation on erosion behavior of HVOF sprayed WC-CoCr coatings, Applied Surface Science, Vol. 258 1225-1234.]Search in Google Scholar
[15. Venkateswarlu K. et al. (2009), Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques, Wear, Vol. 266, 996-1002.10.1016/j.wear.2009.02.001]Search in Google Scholar
