1. bookVolumen 73 (2022): Heft 4 (December 2022)
Zeitschriftendaten
License
Format
Zeitschrift
eISSN
1848-6312
Erstveröffentlichung
26 Mar 2007
Erscheinungsweise
4 Hefte pro Jahr
Sprachen
Englisch
Uneingeschränkter Zugang

Poklicna izpostavljenost kremenčevemu pesku je v Sloveniji podcenjena

Online veröffentlicht: 07 Jan 2023
Volumen & Heft: Volumen 73 (2022) - Heft 4 (December 2022)
Seitenbereich: 297 - 302
Eingereicht: 01 Jul 2022
Akzeptiert: 01 Nov 2022
Zeitschriftendaten
License
Format
Zeitschrift
eISSN
1848-6312
Erstveröffentlichung
26 Mar 2007
Erscheinungsweise
4 Hefte pro Jahr
Sprachen
Englisch

Crystalline silica (SiO2; aka silicon dioxide, quartz sand, silica sand, or quartz) can be found in nearly all types of rock, sand, clay, shale, and gravel, and workers in the stonecutting, mining, construction, concrete, pottery, and ceramic industries are exposed to it the most (1, 2, 3). As it has a high melting point, it is also used in foundries, glass industry, electronics, and production of optical components (3, 4).

Occupational health risk due to exposure to silica arises when workers are exposed to particles of crystalline silica smaller than 5 μm in diameter, that is, to respirable crystalline silica (RSC) (5). Occupational exposure may occur in work operations generating fine dust, such as rock and gravel crushing, stone cutting and grinding, land cultivation, soil excavation, building demolition, aggregate production, and material grinding, polishing, and sandblasting (2).

After RSC is inhaled, it turns into biologically active dust that is deposited in the lungs and increases the risk of silicosis, chronic obstructive pulmonary disease (COPD), and lung cancer (5). The International Agency for Research on Cancer (IARC) classifies crystalline silica in group 1 (i.e., carcinogenic to humans). There is sufficient evidence that exposure to crystalline silica increases the risk of lung cancer (3).

It is estimated that 5.3 million workers in the European Union are exposed to RCS (6). In the US, over 2 million workers are exposed to it in the construction industry alone (7). The number of exposed workers is even higher in developing countries (8).

Slovenia does not have any data available on the number of workers exposed to RCS, the intensity of their exposure, and the consequences of occupational exposure. Therefore, the main goal of this study was to estimate the magnitude of the health burden (silicosis) caused by occupational exposure to RCS among the exposed workers in Slovenia.

Methods

To do that, it was first necessary to estimate the extent of occupational exposure to silica sand in the country, after which an interdisciplinary team of specialists (a pulmonary specialist, a radiologist, and an occupational medicine specialist) reviewed all available and regularly monitored radiographs of exposed glass workers from 1985 to 2001 to determine which changes were likely associated with occupational exposure to crystalline silica. Based on the degree of occupational exposure and silicosis in the group of the studied glass workers, we intended to infer the extent of health impact of exposure to RCS (the onset of silicosis) for all exposed workers.

This research consisted of two cross-sectional studies. The first was to determine the number of workers at risk of occupational exposure to RCS in Slovene industries. The second determined and classified changes in the lung radiographs of glass factory workers exposed to RCS.

The first study population included all workers employed in companies headquartered in Slovenia that had more than ten employees and operated in industries at high risk of occupational exposure to RCS. The starting points for collecting data were two official lists: the list of importers and buyers of hazardous chemicals containing silica maintained by the Slovenian Chemicals Office and the list of business entities operating in industries at high risk of exposure to RSC according to the Standard Classification of Activities in the Slovenian Business Register (SBR). We matched both lists and added importers that were not in the SBR list. Of the 29,545 business entities in this extended SBR list, 10,977 had no employees, 10,425 had up to ten employees, and 6,012 had no information on the number of employees. We therefore took a random sample of 665 companies with no such information to establish that only four engaged in a production that uses silica or is associated with exposure to silica dust. Seeing such a low proportion, we decided not to include in the study any entities with no data on the number of employees in the business register. The final list therefore consisted of 2,131 companies ranking among high-risk industries and employing at least ten people. Ten people was taken as minimum because we assumed that the data would be more accurate if a company had more employees. We reasoned that if we obtain reliable data for companies with over ten employees, we would then investigate companies with fewer than ten employees.

To obtain exposure data on company workers we relied on an online questionnaire asking company representatives to estimate the number of employees regularly or occasionally exposed to silica, specify the type of operations their workers performed and for how long, and report environmental measurements of dust and silica concentrations in their work environment. To estimate the intensity of exposure to RCS, each work operation was classified as high, medium, or low exposure, based on the RCS concentration estimates for specific operations/jobs from literature (9, 10, 11).

Of the 2,131 listed companies, we invited 1,378 that had an email address and asked them to complete our online questionnaire. Because some of the email addresses were invalid, the final number of recipients was 1,281. The survey was sent out four times and then closed. We received 727 questionnaires in response. After eliminating 75 double submissions, blank questionnaires, and questionnaires with substantial inconsistencies established by content analysis, the analysed sample included data from 277 companies (21.6 % of the invited) operating in high-risk industries. These companies employ a total of 18,064 workers.

The second study included 131 glass cutters employed at a large Slovenian glass factory, who had been examined and regularly monitored at an occupational outpatient clinic from 1985 to 2001. We reviewed their lung radiographs in order to determine any health impairments associated with exposure to RCS.

The mean concentration of total dust at their workplace at that time was 8.9 mg/m3 and the average concentration of RCS was 0.9 mg/m3. The mean concentration of respirable dust particles (smaller than 5 μm) was 1,625/cm3, and of particles larger than 5 μm 510/cm3. The mean concentration of RCS in the dust was 2.3 %, which corresponds to the concentration of 0.2 mg/m3 in total dust.

Health impairments were defined as radiological changes in the lungs most likely associated with occupational exposure to silica. Radiographs were reviewed by an interdisciplinary team composed of a pulmonologist, a radiologist, and an occupational medicine specialist with long-standing experience in verifying occupational pneumoconioses. Decisions on the changes were determined by consensus. Based on the presence of lung changes, the radiographs of all 131 workers were classified into three groups. The first group included workers with radiographs showing fibrous changes, tiny calcifications, granulomas, and adhesions; that is, the changes of the lung parenchyma most likely associated with silicosis. The second group included workers with radiographs showing changes that could also be associated with other diseases. The third group included workers with radiographs showing no pathological changes.

Only descriptive statistics were used in the statistical analysis.

Results

Most respondent companies are from the construction industry (50.54 %), followed by those in metal production and processing (27.4 %) and mining and natural stone processing (4.3 %). The construction industry and metal production and processing also employ most workers (33.3 % and 26.3 %, respectively, Table 1).

Number of companies and workers exposed to SiO2 by industry (self-reported estimates by company representatives vs literature-based estimates according to job description)

IndustryCompanies (N)Workers (N)Workers exposed as estimated by
Company representativesStudy authors based on literature data
N %N%
Construction and concrete manufacturing1406,005857 14.32,71645.2
Metal production and processing764,749172 3.662013.1
Mining and natural stone processing1253072 13.621841.1
Ceramics and brick manufacturing2705 7.14868.6
Glass production31,018298 29.329929.3
Other445,692668 11.71,10619.4
Total27718,0642,072 11.55,00727.7

Only 36.5 % (N=101) of the respondents reported that their workers were regularly or occasionally exposed to silica, 2,072 in total, most of whom come from the construction industry. However, the highest share of exposed workers (as self-reported by respondents) comes from the glass industry (29.3 %; Table 1).

Our analysis based on job descriptions associated with high risk of exposure (number of workers performing specific operations, Table 1, last two columns) according to literature data (9, 10, 11), however, suggests a much higher number of exposed workers, namely 5,007, as opposed to the self-reported 2,072. The difference is most notable for workers in the construction industry (Table 1). Nearly half of the 5,007 workers estimated to be exposed to silica based on literature data (N=2,323 or 46 %) carried out operations characterised by high exposure (Figure 1). Among these, 1,513 (65 %) work in the construction industry, followed by those working in metal production and processing (456 or nearly 20 %).

With regard to operations performed in these companies, most workers are exposed to silica when cutting or drilling concrete (764 workers), followed by quarrying, grinding, crushing, and transporting gravel, soil, minerals, or rocks (697 workers), and sandblasting and grinding metal products (662 workers).

Only 23 respondent companies (8.3 %) provided data on dust concentration measurements carried out at 57 work posts. The concentration of silica was measured by only five companies (1.81 %) for at 13 work posts, one of which measured the percentage of RCS. None of these companies is in the construction business. The current exposure limit was exceeded in five silica measurements (locations) (Figure 2).

Figure 1

Number of workers according to exposure intensity by industry

Figure 2

Measured SiO2 concentrations in the air compared to the current permissible exposure limits

The reviewed lung radiographs of 131 workers exposed to silica dust in a glass manufacturer suggest that half (N=66; 51 %) had no changes in the lung parenchyma, 24 (18 %) had changes not necessarily associated with silica exposure, and 41 (31 %) had lung changes most likely associated with exposure to silica. The most common lung changes included tiny calcifications (N=18; 43.9 %) and typical fibrous changes (N=11; 26.8 %).

Discussion

Our research – so far the only attempt to systematically collect data on worker exposure to silica in Slovenia – points to several issues. First and foremost, it clearly shows that official public data on occupational exposure to silica in Slovenia are unreliable and incomplete. There are several reasons for this. The Slovenian

Chemicals Office collects data on importers and buyers of hazardous substances, but most silicon compounds are not classified as hazardous. Data on distributors and retailers as intermediaries between importers and users are deficient, and companies hide certain data behind trade secrets because they are afraid of potential sanctions by occupational health and safety authorities. Furthermore, some high-risk (e.g., construction) companies are registered under low-risk activities (e.g., “project implementation organisation”). In addition, most companies did not respond to the survey, even though a reminder was sent to them three times. Of the 1,281 companies included in the survey, only 652 filled out the questionnaire. One fourth of these (N=164) denied exposure to silica dust in all questions and work operation descriptions, which suggests that they either ignore the problem, are not informed about this issue, or are afraid of sanctions and/or inspection.

Only 277 (of 2,131 listed) companies (13 %), which employ 18,064 people, provided some kind of data, albeit strongly underestimating occupational exposure to silica.

Another issue is the glaring difference between the number of workers exposed to silica as estimated by self-reporting company representatives 2,072 (11.5 %) and the number based on job description in line with literature 5,007 (27.7 %). This discrepancy is most likely owed to a lack of knowledge or awareness. A case in point is glass industry, in which the use of silica sand is widely known and shows practically no difference between the self-reported number of exposed workers and the number based on job description. The greatest difference between these two sets of data are in the construction industry, with the 1:3 ratio between the two. This is an industry in which, according to our own experience, awareness about exposure to silica sand is generally poor.

Furthermore, it is alarming that the concentration of dust in the air is measured by no more than 8.30 % of all participating companies and the concentration of silica by 1.81 % of the companies. It has become clear that such a small amount of measurement data cannot be used in further research.

In contrast, data from the second part, the one studying changes in lung radiographs of occupationally exposed glasscutters between 1985 and 2001 are far more reliable. We chose glass industry, as the questionnaire analysis suggests that these companies are best informed about exposure to silica. They require that their glassworkers take regular medical check-ups, which include lung radiography. The identified exposure-related changes in nearly a third of the reviewed radiographic images and silica concentrations twice the current permissible exposure limit (although glass industry ranks lower in exposure than some other industries) suggest that lung radiographs of construction and concrete production workers in our study would show similar if not even worse findings than those of glass cutters, yet no such data are available.

An obvious weakness of the first part of our research is that the survey data are considerably scarcer than expected in terms of both quantity and quality, which makes our findings unreliable. Nonetheless, or precisely because of this, this study is important because it demonstrates low awareness of the sources of exposure to silica and the associated health risks among all stakeholders.

Another clear weakness of this study is the lack of air silica dust measurements at workplace and the consequent use of semi-quantitative estimates of exposure (i.e., small, medium, and large) based on literature data, which may be misleading. Even so, we find this approach appropriate enough, as it reveals that company representatives grossly underestimate workers’ exposure to RSC and its consequences.

The limitations of the second part of our research primarily arise from the fact that many radiographs were too old and hardly intelligible, so that the group of medical experts was not able to apply the ILO classification (12).

Despite all these weaknesses, the main message this study conveys is that permissible silica exposure limits, which have been repeatedly lowered in the last decade, can protect the health of exposed workers only if all the stakeholders are systematically informed, inspections are consistently carried out, and health surveillance of all exposed workers is implemented regularly.

Figure 1

Number of workers according to exposure intensity by industry
Number of workers according to exposure intensity by industry

Figure 2

Measured SiO2 concentrations in the air compared to the current permissible exposure limits
Measured SiO2 concentrations in the air compared to the current permissible exposure limits

Number of companies and workers exposed to SiO2 by industry (self-reported estimates by company representatives vs literature-based estimates according to job description)

Industry Companies (N) Workers (N) Workers exposed as estimated by
Company representatives Study authors based on literature data
N % N %
Construction and concrete manufacturing 140 6,005 857 14.3 2,716 45.2
Metal production and processing 76 4,749 172 3.6 620 13.1
Mining and natural stone processing 12 530 72 13.6 218 41.1
Ceramics and brick manufacturing 2 70 5 7.1 48 68.6
Glass production 3 1,018 298 29.3 299 29.3
Other 44 5,692 668 11.7 1,106 19.4
Total 277 18,064 2,072 11.5 5,007 27.7

Agency for Toxic Substances and Disease Registry (ATSDR). Toxicological Profile for Silica. Atlanta (GA): U.S. Department of Health and Human Services, Public Health Service; 2019 [displayed 24 November 2022]. Available at https://www.atsdr.cdc.gov/toxprofiles/tp211.pdf Agency for Toxic Substances and Disease Registry (ATSDR) Toxicological Profile for Silica. Atlanta (GA): U.S. Department of Health and Human Services, Public Health Service; 2019 [displayed 24 November 2022] Available at https://www.atsdr.cdc.gov/toxprofiles/tp211.pdfSearch in Google Scholar

Meldrum M, Howden P. Crystalline silica: variability in fibrogenic potency. Ann Occup Hyg 2002;46(Suppl 1):27-30. doi: 10.1093/ annhyg/46.suppl_1.27 Meldrum M Howden P Crystalline silica: variability in fibrogenic potency Ann Occup Hyg 200246Suppl 127 30 10.1093/annhyg/46.suppl_1.27DOI öffnenSearch in Google Scholar

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans. Silica dust, crystalline, in the form of quartz or cristobalite. In: IARC monographs on the evaluation of carcinogenic risks to humans. A review of human carcinogens. Vol. 100 C. Arsenic, metals, fibres and dusts. Lyon: IARC; 2012; p. 355-405. IARC Working Group on the Evaluation of Carcinogenic Risks to Humans. Silica dust, crystalline, in the form of quartz or cristobalite In IARC monographs on the evaluation of carcinogenic risks to humans. A review of human carcinogens. Vol. 100 C. Arsenic, metals, fibres and dusts Lyon IARC 2012 p 355 405Search in Google Scholar

NEPSI. Good Practice Guide on Workers Health Protection through the Good Handling and Use of Crystalline Silica and Products containing it [displayed 24 November 2022]. Available at https://guide.nepsi.eu/wp-content/uploads/2021/08/NEPSI-Good-Practice-Guide.-revised-0821pdf.pdf NEPSI. Good Practice Guide on Workers Health Protection through the Good Handling and Use of Crystalline Silica and Products containing it [displayed 24 November 2022] Available at https://guide.nepsi.eu/wp-content/uploads/2021/08/NEPSI-Good-Practice-Guide.-revised-0821pdf.pdfSearch in Google Scholar

Occupational Safety and Health Administration (OSHA). Occupational Exposure to Respirable Crystalline Silica - Review of Health Effects Literature and Preliminary Quantitative Risk Assessment. Docket OSHA-2010-0034:483 [displayed 24 November 2022]. Available at https://oem.msu.edu/images/abrasive_blasting/2018_Appendices/V-A_OSHA_LiteratureReviewHealthEffects_RiskAssessment.pdf Occupational Safety and Health Administration (OSHA). Occupational Exposure to Respirable Crystalline Silica - Review of Health Effects Literature and Preliminary Quantitative Risk Assessment. Docket OSHA-2010-0034:483 [displayed 24 November 2022] Available at https://oem.msu.edu/images/abrasive_blasting/2018_Appendices/V-A_OSHA_LiteratureReviewHealthEffects_RiskAssessment.pdfSearch in Google Scholar

Cherrie JW, Gorman M Ng, Shafrir A, van Tongeren M, Searl A, Sanchez-Jimenez A, Mistry R, Sobey M, Corden C, Rushton L, Hutchings S. Health, Socio-Economic and Environmental Aspects of Possible Amendments to the EU Directive on the Protection of Workers from the Risks Related to Exposure to Carcinogens and Mutagens at Work. Respirable Crystalline Silica. IOM Research Project P937/8, May 2011 [displayed 24 November 2022]. Available at https:// ec.europa.eu/social/BlobServlet?docId=10161&langId=en Cherrie JW Gorman M Ng Shafrir A van Tongeren M Searl A Sanchez-Jimenez A Mistry R Sobey M Corden C Rushton L Hutchings S Health, Socio-Economic and Environmental Aspects of Possible Amendments to the EU Directive on the Protection of Workers from the Risks Related to Exposure to Carcinogens and Mutagens at Work. Respirable Crystalline Silica. IOM Research Project P937/8, May 2011 [displayed 24 November 2022] Available at https://ec.europa.eu/social/BlobServlet?docId=10161&langId=enSearch in Google Scholar

OSHA. OSHA FactSheet. OSHA’s Respirable Crystalline Silica Standard for Construction, 2017 [displayed 24 November 2022]. Available at https://www.osha.gov/sites/default/files/publications/osha3681.pdf OSHA OSHA FactSheet. OSHA’s Respirable Crystalline Silica Standard for Construction, 2017 [displayed 24 November 2022] Available at https://www.osha.gov/sites/default/files/publications/osha3681.pdfSearch in Google Scholar

Hoy RF, Jeebhay MF, Cavalin C, Chen W, Cohen RA, Fireman E, Go LHT, León-Jiménez A, Menéndez-Navarro A, Ribeiro M, Rosental PA. Current global perspectives on silicosis - Convergence of old and newly emergent hazards. Respirology 2022;27:387-98. doi: 10.1111/ resp.14242 Hoy RF Jeebhay MF Cavalin C Chen W Cohen RA Fireman E Go LHT León-Jiménez A Menéndez-Navarro A Ribeiro M Rosental PA Current global perspectives on silicosis - Convergence of old and newly emergent hazards Respirology 202227387 98 10.1111/resp.14242931085435302259DOI öffnenSearch in Google Scholar

Gardiner KJ, Malcolm Harrington J, editors. Occupational Hygiene. 3rd ed. Oxford: Blackwell Publishing; 2005. Gardiner KJ Malcolm Harrington J editors Occupational Hygiene. 3rd ed Oxford Blackwell Publishing; 200510.1002/9780470755075Search in Google Scholar

Mohamed SH, El-Ansary AL, El-Aziz EMA. Determination of crystalline silica in respirable dust upon occupational exposure for Egyptian workers. Ind Health 2018;56:255-63. doi: 10.2486/ indhealth.2016-0192 Mohamed SH El-Ansary AL El-Aziz EMA Determination of crystalline silica in respirable dust upon occupational exposure for Egyptian workers Ind Health 201856255 63 10.2486/indhealth.2016-0192598546529199263DOI öffnenSearch in Google Scholar

Kuo C-T, Chiu F-F, Bao B-Y, Chang T-Y. Determination and prediction of respirable dust and crystalline-free silica in the Taiwanese foundry industry. Int J Environ Res Public Health 2018;15(10):2105. doi: 10.3390/ijerph15102105 Kuo C-T Chiu F-F Bao B-Y Chang T-Y Determination and prediction of respirable dust and crystalline-free silica in the Taiwanese foundry industry Int J Environ Res Public Health 201815102105 10.3390/ijerph15102105621021230257469DOI öffnenSearch in Google Scholar

International Labour Office (ILO). Guidelines for the use of the ILO International Classification of Radiographs of Pneumoconiosis (revised edition 2011). Occupational Safety and Health Series 22. Geneva: ILO; 2011. International Labour Office (ILO). Guidelines for the use of the ILO International Classification of Radiographs of Pneumoconiosis (revised edition 2011). Occupational Safety and Health Series 22 Geneva ILO 2011Search in Google Scholar

Empfohlene Artikel von Trend MD

Planen Sie Ihre Fernkonferenz mit Scienceendo