<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The main objective of this paper is to analyze the direct and interaction effect of resistance spot welding (RSW) parameters on microstructure and strength of DP800 steel joints using response surface methodology (RSM). The DP800 steel sheets were spot welded in straight lap and cross lap joint configuration using RSW. The relationship between the RSW parameters, tensile shear fracture load (TSFL) and nugget zone hardness (NZH) was established employing statistical regression analysis and validated using Analysis of Variance (ANOVA). The DP800 steel joints made using welding current of 5.0 kA, electrode pressure of 4.0 MPa, and welding time of 1.50 s displayed maximum STRAIGHT-TSFL of 21.7 kN, CROSS-TSFL of 17.65 kN, and NZH of 589 HV<sub>0.5</sub> respectively.</p>
</abstract>

The main objective of this paper is to analyze the direct and interaction effect of resistance spot welding (RSW) parameters on microstructure and strength of DP800 steel joints using response surface methodology (RSM). The DP800 steel sheets were spot welded in straight lap and cross lap joint configuration using RSW. The relationship between the RSW parameters, tensile shear fracture load (TSFL) and nugget zone hardness (NZH) was established employing statistical regression analysis and validated using Analysis of Variance (ANOVA). The DP800 steel joints made using welding current of 5.0 kA, electrode pressure of 4.0 MPa, and welding time of 1.50 s displayed maximum STRAIGHT-TSFL of 21.7 kN, CROSS-TSFL of 17.65 kN, and NZH of 589 HV0.5 respectively.

The Effect of Resistance Spot Welding Parameters on Microstructure and Strength of DP800 Steel Joints Using Response Surface Methodology

Advances in Materials Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The main objective of this paper is to analyze the direct and interaction effect of resistance spot welding (RSW) parameters on microstructure and strength of...

The Effect of Resistance Spot Welding Parameters on Microstructure and Strength of DP800 Steel Joints Using Response Surface Methodology

Online veröffentlicht: 08. Okt. 2022

Seitenbereich: 53 - 78

DOI: https://doi.org/10.2478/adms-2022-0013

Schlüsselwörter
Resistance spot welding, DP800 steel, tensile shear fracture load, weld nugget, microstructure, hardness, optimization, response surface methodology

© 2022 Chakkravarthi Rajarajan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Effect of Resistance Spot Welding Parameters on Microstructure and Strength of DP800 Steel Joints Using Response Surface Methodology

Online veröffentlicht: 08. Okt. 2022

Seitenbereich: 53 - 78

DOI: https://doi.org/10.2478/adms-2022-0013

SchlüsselwörterResistance spot welding, DP800 steel, tensile shear fracture load, weld nugget, microstructure, hardness, optimization, response surface methodology

© 2022 Chakkravarthi Rajarajan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Resistance spot welding, DP800 steel, tensile shear fracture load, weld nugget, microstructure, hardness, optimization, response surface methodology