New approaches for improving selectivity and sensitivity of resistive gas sensors: A review

[1]G. Sberveglieri, “Recent developments in semiconducting thin-film gas sensors,” Sensors and Actuators B: Chemical, vol. 23, 1995, pp. 103– 109. Search in Google Scholar

[2]G.-J. Li, X.-H. Zhang, S. Kawi, “Relationships between sensitivity, catalytic activity, and surface areas of SnO₂ gas sensors,” Sensors and Actuators B: Chemical, vol. 60, 1999, pp. 64–70. Search in Google Scholar

[3]M. E. Franke, T. J. Koplin, U. Simon, “Metal and metal oxide nanoparticles in chemiresistors: Does the nanoscale matter?” Small, vol. 2, 2006, pp. 36–50. Search in Google Scholar

[4]G. Korotcenkov, “Gas response control through structural and chemical modifications of metal oxide films: State of the art and approaches,” Sensors and Actuators B: Chemical, vol. 107, 2005, pp. 209–232. Search in Google Scholar

[5]T. Hyodo, S. Abe, Y. Shimizu, M. Egashira, “Gas-sensing properties of ordered mesoporous SnO₂ and effects of coatings thereof,” Sensors and Actuators B: Chemical, vol. 93, 2003, pp. 590–600. Search in Google Scholar

[6]N. Yamazoe, Y. Kurokawa, T. Selyama, “Effects of additives on semiconductor gas sensors,” Sensors and Actuators, vol. 4, 1983, pp. 283–289. Search in Google Scholar

[7]P. Heszler, R. Ionescu, E. Llobet, L. F. Reyes, J. Smulko, et al., “On the selectivity of nanostructured semiconductor gas sensors,” Physica Status Solidi B, vol. 244, 2007, pp. 4331–4335. Search in Google Scholar

[8]L. B. Kish, R. Vajtai, C. G. Granqvist, “Extracting information from noise spectra of chemical sensors: Single sensor electronic noses and tongues,” Sensors and Actuators B: Chemical, vol. 71, 2000, pp. 55–59. Search in Google Scholar

[9]J. Ederth, J. Smulko, L. B. Kish, P. Heszler, C. G. Granqvist, “Comparison of classical and fluctuation-enhanced gas sensing with PdxWO₃ nanoparticle films,” Sensors and Actuators B: Chemical, vol. 113, 2006, pp. 310–315. Search in Google Scholar

[10]M. Kotarski, J. Smulko, “Noise measurement setups for fluctuations enhanced gas sensing,” Metrology and Measurement Systems, vol. 16, 2009, pp. 457–464. Search in Google Scholar

[11]M. Kotarski, J. Smulko, “Hazardous gases detection by fluctuation-enhanced gas sensing,” Fluctuation and Noise Letters, vol. 9, 2010, pp. 359–371. Search in Google Scholar

[12]A. K. Vidybida, “Adsorption–desorption noise can be used for improving selectivity,” Sensors and Actuators A: Physical, vol. 107, 2003, pp. 233–237. Search in Google Scholar

[13]A. W. Stadler, Z. Zawiślak, A. Dziedzic, D. Nowak, “Noise spectroscopy of resistive components at elevated temperature,” Metrology and Measurement Systems, vol. 21, 2014, pp. 15–26. Search in Google Scholar

[14]C. G. Granqvist, S. Green, E. K. Jonson, R. Marsal, G. A. Niklasson, et al., “Electrochromic foil-based devices: Optical transmittance and modulation range, effect of ultraviolet irradiation, and quality assessment by 1/f current noise,” Thin Solid Films, vol. 516, 2008, pp. 5921–5926. Search in Google Scholar

[15]S. R. Morrison, “Selectivity in semiconductor gas sensors,” Sensors and Actuators, vol. 12, 1987, pp. 425–440. Search in Google Scholar

[16]N. Yamazoe, K. Shimanoe, “Theoretical approach to the gas response of oxide semiconductor film devices under control of gas diffusion and reaction effects,” Sensors and Actuators B: Chemical, vol. 154, 2011, pp. 277–282. Search in Google Scholar

[17]N. P. Zaretskiy, L. I. Menshikov, A. A. Vasiliev, “On the origin of sensing properties of the nanostructured layers of semiconducting metal oxide materials,” Sensors and Actuators B: Chemical, vol. 170, 2012, pp. 148–157. Search in Google Scholar

[18]B. Ayhan, C. Kwan, J. Zhou, L. B. Kish, K. D. Benkstein, et al., “Fluctuation enhanced sensing (FES) with a nanostructured, semiconducting metal oxide film for gas detection and classification,” Sensors and Actuators B: Chemical, vol. 188, 2013, pp. 651–660. Search in Google Scholar

[19]E. Comini, A. Cristalli, G. Faglia, G. Sberveglieri, “Light enhanced gas sensing properties of indium oxide and tin dioxide sensors,” Sensors and Actuators B: Chemical, vol 65, 2000, pp. 260–263. Search in Google Scholar

[20]Chen H., Liu Y., Xie C., Wu J., Zeng D., et al., “A comparative study on UV light activated porous TiO₂ and ZnO film sensors for gas sensing at room temperature,” Ceramics International, 38, 2012, pp. 503–509. Search in Google Scholar

[21]S. Mishra, C. Ghanshyam, N. Ram, R. P. Bajpai, R. K. Bedi, “Detection mechanism of metal oxide gas sensor under UV radiation,” Sensors and Actuators B: Chemical, vol. 97, 2004, pp. 387–390. Search in Google Scholar

[22]Z. Topalian, J. Smulko, G. A. Niklasson, C. G. Granqvist, “Resistance noise in TiO₂-based thin film gas sensors under ultraviolet irradiation,” Journal of Physics: Conference Series, vol. 76, 2007, 012056/1– 012056/5. Search in Google Scholar

[23]P. Kalinowski, Ł. Woźniak, A. Strzelczyk, P. Jasinski, G. Jasinski, “Efficiency of linear and non-linear classifiers for gas identification from electrocatalytic gas sensor,” Metrology and Measurement Systems, vol. 20, 2013, pp. 501–512. Search in Google Scholar

[24]C. Distante, N. Ancona, P. Siciliano, “Support vector machines for olfactory signals recognition,” Sensors and Actuators B: Chemical, vol. 88, 2003, pp. 30–39. Search in Google Scholar

[25]R. F. Machado, D. Laskowski, O. Deffenderfer, T. Burch, S. Zheng, et al., “Detection of lung cancer by sensor array analyses of exhaled breath,” American Journal of Respiratory and Critical Care Medicine, vol. 171, 2005, pp. 1286–1291. Search in Google Scholar

[26]F. N. Hooge, T. G. M. Kleinpenning, L. K. J. Vandamme, “Experimental studies on 1/f noise,” Reports on Progress in Physics, vol. 44, 1981, pp. 479–532. Search in Google Scholar

[27]J. Smulko, C. G. Granqvist, L. B. Kish, “On the statistical analysis of noise in chemical sensors and its application for sensing,” Fluctuation and Noise Letters, vol. 1, 2001, pp. L147–L153. Search in Google Scholar

[28]G. Schmera G., L. Kish, J. Smulko, “Method of pattern generation for gas recognition,” Patent pending, USA, Navy Case, 2010, 96130. Search in Google Scholar

[29]J. M. Smulko, J. Ederth, L. B. Kish, P. Heszler, C. G. Granqvist, “Higher-order spectra in nanoparticle gas sensors.” Fluctuation and Noise Letters, vol. 4, 2004, L597-L603. Search in Google Scholar

[30]S. Vallejos, P. Umek, T. Stoycheva, F. Annanouch, E. Llobet, X. Correig, P. De Marco, C. Bittencourt, C. Blackman, “Single-step deposition of Au- and Pt-nanoparticle-functionalized tungsten oxide nanoneedles synthesized via aerosol-assisted CVD, and used for fabrication of selective gas microsensor arrays”, Advanced Functional Materials, vol. 23, 2013, pp. 1313–1322. Search in Google Scholar

[31]P. Geladi, K. Esbensen, “The start and early history of chemometrics: Selected interviews. Part 1,” Journal of Chemometrics, vol. 4, 2005, pp. 337–354. Search in Google Scholar

[32]H. C. Chang, L. B. Kish, M. D. King, C. Kwan, “Identification of bacteria by patterns generated from odor spectra,” 2009, arXiv preprint arXiv:0902.1368. Search in Google Scholar

[33]A. P. Turner, N. Magan, “Electronic noses and disease diagnostics,” Nature Reviews Microbiology, vol. 2, 2004, pp. 161–166. Search in Google Scholar

[34]P. Kalinowski, Ł. Woźniak, A. Strzelczyk, P. Jasinski, G. Jasinski, “Efficiency of linear and non-linear classifiers for gas identification from electrocatalytic gas sensor,” Metrology and Measurement Systems, vol. 20, 2013, pp. 501–512. Search in Google Scholar

[35]A. Lay-Ekuakille, P. Vergallo, R. Morello, C. De Capua, “Indoor air pollution system based on LED technology,” Measurement, vol. 47, 2014, pp.749–755, Search in Google Scholar

[36]C. Kwan, G. Schmera, J. Smulko, L. B. Kish, P. Heszler, C. G. Granqvist, “Advanced agent identification with fluctuation-enhanced sensing,” IEEE Sensors Journal, vol. 8, 2008, pp. 706–713. Search in Google Scholar