<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper presents a 96 × 96 fingerprint sensor implemented with 0.25 μm standard CMOS technology. The implemented fingerprint sensor is based on a pseudo-direct signaling scheme that does not require an electrode for signal transmission. And the pseudo-direct signaling was combined with sensor cell isolation scheme which controls the unwanted influx of the electric fields effectively. And a pipelined scan technique was applied for fast fingerprint image capture while maintaining SNR performance. It was fabricated with 0.25 μm standard CMOS technology and was molded with 80 μm-thick epoxy after fabrication. The fingerprint sensor was tested with ARM board combined with PC applications. The obtained fingerprint images from the fingerprint sensor were enhanced to reduce the noise of the obtained images by using filtering technique, such as Wiener, 2D Gaussian, and 2D FIR filtering. From the test results, it was concluded that the implemented fingerprint sensor with the isolation scheme worked well without bezel electrode and can be used in biometric authentication systems effectively.</p>
</abstract>

This paper presents a 96 × 96 fingerprint sensor implemented with 0.25 μm standard CMOS technology. The implemented fingerprint sensor is based on a pseudo-direct signaling scheme that does not require an electrode for signal transmission. And the pseudo-direct signaling was combined with sensor cell isolation scheme which controls the unwanted influx of the electric fields effectively. And a pipelined scan technique was applied for fast fingerprint image capture while maintaining SNR performance. It was fabricated with 0.25 μm standard CMOS technology and was molded with 80 μm-thick epoxy after fabrication. The fingerprint sensor was tested with ARM board combined with PC applications. The obtained fingerprint images from the fingerprint sensor were enhanced to reduce the noise of the obtained images by using filtering technique, such as Wiener, 2D Gaussian, and 2D FIR filtering. From the test results, it was concluded that the implemented fingerprint sensor with the isolation scheme worked well without bezel electrode and can be used in biometric authentication systems effectively.

Touch fingerprint sensor based on sensor cell isolation technique with pseudo direct signaling

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

running-head

This paper presents a 96 × 96 fingerprint sensor implemented with 0.25 μm standard CMOS technology. The implemented fingerprint sensor is based on a...

Touch fingerprint sensor based on sensor cell isolation technique with pseudo direct signaling

Article Category: research-article

Online veröffentlicht: 02. Mai 2018

Seitenbereich: 1 - 9

Eingereicht: 18. Okt. 2018

Akzeptiert: 02. März 2019

DOI: https://doi.org/10.21307/ijssis-2019-001

Schlüsselwörter
Fingerprint sensor, Pseudo direct scheme, Isolation sensor cell, Bezel electrode, FAR, FRR

© 2019 Hyeopgoo Yeo published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Touch fingerprint sensor based on sensor cell isolation technique with pseudo direct signaling

Article Category: research-article

Online veröffentlicht: 02. Mai 2018

Seitenbereich: 1 - 9

Eingereicht: 18. Okt. 2018

Akzeptiert: 02. März 2019

DOI: https://doi.org/10.21307/ijssis-2019-001

SchlüsselwörterFingerprint sensor, Pseudo direct scheme, Isolation sensor cell, Bezel electrode, FAR, FRR

© 2019 Hyeopgoo Yeo published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Schlüsselwörter
Fingerprint sensor, Pseudo direct scheme, Isolation sensor cell, Bezel electrode, FAR, FRR