This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
G. Nejat and B. Benhabib, “A Guidance-Based Motion-Planning Methodology for the Docking of Autonomous Vehicles,”Journal of Robotic Systems, vol. 22, no. 12, pp. 780793, 2005.Search in Google Scholar
J. Kim and S. Rock, “Feedback Dual Controller Design and Its Application to Monocular Vision-Based Docking,”Journal of Guidance, Control, and Dynamics, vol. 32, no. 4, pp. 1134-1142, 2009.Search in Google Scholar
F. Aghili, M. Kuryllo, G. Okouneva and C. English, “Robust Vision-Based Pose Estimation of Moving Objects for Automated Rendezvous and Docking,” in International Conference on Mechatronics and Automation, Xi’an, China, 2010.10.1109/ICMA.2010.5589051Search in Google Scholar
M. Breivik and J.-E. Loberg, “A Virtual Target-Based Underway Docking Procedure for Unmanned Surface Vehicles,” in IFAC World Congress, Milan, Italy, 2011.10.3182/20110828-6-IT-1002.02969Search in Google Scholar
P. Petrov, C. Boussard, S. Ammoun and F. Nashashibi, “A Hybrid Control for Automatic Docking of Electric Vehicles for Recharging,” in IEEE International Conference on Robotics and Automation, St. Paul, MN, 2012.10.1109/ICRA.2012.6225087Search in Google Scholar
K. Teo, E. An and P.-P. J. Beaujean, “A Robust Fuzzy Autonomous Underwater Vehicle (AUV) Docking Approach for Unknown Current Disturbances,”IEEE Journal of Oceanic Engineering, vol. 37, no. 2, pp. 143-155, February 2012.10.1109/JOE.2011.2180058Search in Google Scholar
B. Tamadazte, N. Le-Fort Piat and E. Marchand, “A Direct Visual Servoing Scheme for Automatic Nanopositioning,”IEEE/ASME Transactions on Mechatronics, vol. 17, no. 4, pp. 728-736, August 2012.10.1109/TMECH.2011.2128878Search in Google Scholar
J.-Y. Park, B.-H. Jun, P.-m. Lee and J. Oh, “Experiments on Vision Guided Docking of an Autonomous Underwater Vehicle Using One Camera,”Journal of Ocean Engineering, vol. 36, no. 1, pp. 48-61, January 2009.10.1016/j.oceaneng.2008.10.001Search in Google Scholar
G. Brooker, Introduction to Sensors for Ranging and Imaging, Scitech, 2009.10.1049/SBRA014ESearch in Google Scholar
P. Hariharan, Optical Interferometry, 2nd Edition ed., Academic Press Inc, 2003.10.1016/B978-012311630-7/50002-2Search in Google Scholar
M. F. Costa, “Use of CCD Arrays Versus PSD Detectors in an Optical Triangulation-Based Microtopographer,”Optical Inspection and Micromeasurements 79, vol. 2782, pp. 79-86, 1996.Search in Google Scholar
W. Cong, C. Wenjie and M. Tomizuka, “Robot End-Effector Sensing Position Sensitive Detector and Inertial Sensor,” in Conference on Robotics and Automation, RiverCentre Saint Paul,Minnesota,USA, 2012.Search in Google Scholar
S. Lee, R. Mayor and J. Ni, “Development of a Six-Degree-of-Freedom Geometric Error Measurement System for a Meso-Scale Machine Tool,”Journal of Manufacturing Science and Engineering, vol. 127, pp. 857-865, November 2005.10.1115/1.2035692Search in Google Scholar
S. Venna and Y. Lin, “Preliminaries of Six-Degree-of-Freedom Ultra Resolution Metrology with Laser Beams and Convex Mirrors,” in Conference on Nano/Micro Engineered and molecular Systems, Zhuhai, 2006.10.1109/NEMS.2006.334817Search in Google Scholar
O. Marinescu and B. Epureanu, “High-Precision Positioning of Laser Beams for Vibration Measurements,”ASME, Journal of Vibration and Acoustics, vol. 136, no. 1, doi:10.1115/1.4025444, February 2014.10.1115/1.4025444Search in Google Scholar
L. Kerhuel, S. Viollet and N. Francheschini, “The VODKA Sensor: A Bio-Inspired Hyperacute Optical Position Sensing Device,”IEEE Sensors Journal, vol. 12, no. 2, pp. 315-324, February 2012.10.1109/JSEN.2011.2129505Search in Google Scholar
G. Flandin, F. Chaumette and E. Marchand, “Eye-in-Hand/Eye-to-Hand Cooperation for Visual Servoing,” in International Conference on Robotics& Automation, San Francisco, 2000.Search in Google Scholar
M. Bachiller, A. Adan, V. Feliu and C. Cerrada, “Well Structured Robot Positioning Control Strategy for Position Based Visual Serving,” in International Conference on Robotics& Automation, Seoul, 2001.Search in Google Scholar
R.-T. Lee and F.-J. Shiou, “Multi-Beam Laser Probe for Measuring Position and Orientation of Freeform Surface,”Measurement, vol. 44, no. 10, pp. 1-10, December 2011.10.1016/j.measurement.2010.05.005Search in Google Scholar
H. Wang, H. Kuangrong and Y. Ding, “Research on High-Precision Measurement of position and Orientation of 6-DOF Parallel Robot Based on Stereo Vision and Positional Solution,”Advanced Materials Research, Vols. 479-481, pp. 1931-1935, February 2012.Search in Google Scholar
H. W. Park, Y. B. Park and S. Y. Liang, “Non-contact measurement methods for micro- and meso-scale tool positioning,”Int J Adv Manuf Technol., vol. 60, p. 251–260, 2012.10.1007/s00170-011-3601-2Search in Google Scholar
Y. Kawato and W. Kim, “Multi-Degree-of-Freedom Precision Position Sensing and Motion Control Using Two-Axis Hall-Effect Sensors,”ASME, Journal of Dynamic Systems, Measurement, and Control, vol. 128, no. 4, pp. 980-988, 2006.10.1115/1.2363201Search in Google Scholar
K. Li, Q. Wang, Q. Zhang and C. Zhao, “Vision Autonomous Relative Navigation Algorithm for Distributed Micro/Nano Satellite Earth Observation System Based-on Motor Algebra,” in International Conference on Environmental Science and Information Application Technology, Wuhan,China, 2009.10.1109/ESIAT.2009.483Search in Google Scholar
S. Jeon, M. Tomizuka and T. Katou, “Kinematic Kalman Filter (KKF) for Robot EndEffector Sensing,”ASME, Journal of Dynamic Systems, Measurement, and Control, vol. 131, no. 2, doi:10.1115/1.3023124, February 2009.10.1115/1.3023124Search in Google Scholar
B. Shrinzadeh, P. Teoh, Y. Tian, M. Dalvand, Y. Zhong and H. Liaw, “Laser Interferometry Guidance Methodology for High Precision Positioning of Mechanisms and Robots,”Robotics and Computer-Integrated Manufacturing, vol. 26, pp. 74-82, 2010.10.1016/j.rcim.2009.04.002Search in Google Scholar
J. Dong, S. M. Salapaka and P. M. Ferreira, “Robust Control of a Parallel-Kinematic Nanopositioner,”Journal of Dynamic Systems, Measurement, and Control, vol. 130, no. 4, pp. 041007-041007-15, 2008.Search in Google Scholar
Y. Yun and Y. Li, “Modeling and Control Analysis of a 3-PUPU Dual Compliant Parallel Manipulator for Micro Positioning and Active Vibration Isolation,”Journal of Dynamic Systems, Measurement, and Control, vol. 134, no. 2, pp. 021001-021001-9, 2011.Search in Google Scholar
J. Qi and J. Cai, “Error Modelling and Compensation of 3D Scanning Robot System based on PSO-RBFNN,”International Journal on Smart Sensing and Intelligent Systems, vol. 7, no. 2, pp. 837-855, 2014.10.21307/ijssis-2017-684Search in Google Scholar
J. Zhang and J. Cai, “Error Analysis and Compensation Method Of 6-axis Industrial Robot,”International Journal on Smart Sensing and Intelligent Systems, vol. 6, no. 4, pp. 13831399, 2013.Search in Google Scholar
Z. Long, Y. Yuan, Y. Xu and S. Du, “High-Accuracy Positioning of Lathe Servo System,”International Journal of Smart Sensing and Intelligent Systems, vol. 7, no. 3, pp. 1114-1133, 2014.Search in Google Scholar
G. Nejat and B. Benhabib, “Modelless Guidance for the Docking of Autonomous Vehicles,”IEEE Transactions on Robotics, vol. 23, no. 4, pp. 753-762, August 2007.10.1109/TRO.2007.900634Search in Google Scholar
E. Zhou, M. Zhu, G. Nejat and B. Benhabib, “Autonomous Positioning of Spatial Parallel Kinematic Mechanisms - A meso-Milling Machine Example,” in Virtual Manufacturing Process Technology, Calgary, 2014.Search in Google Scholar
P. Renaud, N. Andreff, J.-M. Lavest and M. Dhome, “Simplifying the Kinematic Calibration of Parallel Mechanisms Using Vision-Based Metrology,”IEEE Transactions on Robotics, vol. 22, no. 1, pp. 12-22, 2006.10.1109/TRO.2005.861482Search in Google Scholar
H. Azulay, M. Mahmoodi, R. Zhao, J. Mills and B. Benhabib, “Comparative Analysis of A New 3xPPRS Parallel Kinematic Mechanism,”Robotics and Computer-Integerated Manufacturing, vol. 30, pp. 369-378, 2014.10.1016/j.rcim.2013.12.003Search in Google Scholar
A. Y. Le, J. K. Mills and B. Benhabib, “Dynamic Modeling and Control Design for A Parallel-Mechanism-Based meso-Milling Machine Tool,”Robotica, vol. 32, no. 4, pp. 515532, July 2014.Search in Google Scholar
D. Corbel, O. Company, S. Krut and F. Pierrot, “Enhancing PKM Accuracy by Separating Actuation and Measurement: A 3DOF Case Study,”ASME, Journal of Mechanisms and Robotics, vol. 2, no. 3, doi:10.1115/1.4001779, July 2010.10.1115/1.4001779Search in Google Scholar
G. Wei, S. Bai, J. A. Kepler and S. Caro, “Error Modelling and Experimental Validation of a Planar 3-PPR Parallel Manipulator with Joint Clearances,”Journal of Mechanisms and Robotics, vol. 4, no. 4, 2012.10.1115/1.4007487Search in Google Scholar
A. C. Majarena, J. Santolaria, D. Samper and J. J. Aguilar, “An Overview of Kinematic and Caliberation Models Using Internal/ External Sensors or Constraints to Improve the Behavior of Spatial Parallel Mechanisms,”Sensors, vol. 10, pp. 256-297, 2010.10.3390/s101110256323099922163469Search in Google Scholar
