<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper describes a design for RFID (Radio Frequency Identification) tag using license plate attached the vehicle bumper in 900 MHz band. The implemented metal tag for a license plate is applied metal shielding method, watertight method of RFID tag, and metal corrosion protection method using silk screen technique. Moreover, its range of the fabricated tag antenna that the license plate and the vehicle bumper were fixed by volt and nut was observed 8.2 m. This measured readable range showed about 5 m above far distance more than the average readable range of commercial tag antenna. The RFID have ability of 0.5 seconds of recognition speed in the evaluation of performance. The tag for license plate will be able to provide to the custom administrator and goods manager in various telemetries services.</p></abstract>

This paper describes a design for RFID (Radio Frequency Identification) tag using license plate attached the vehicle bumper in 900 MHz band. The implemented metal tag for a license plate is applied metal shielding method, watertight method of RFID tag, and metal corrosion protection method using silk screen technique. Moreover, its range of the fabricated tag antenna that the license plate and the vehicle bumper were fixed by volt and nut was observed 8.2 m. This measured readable range showed about 5 m above far distance more than the average readable range of commercial tag antenna. The RFID have ability of 0.5 seconds of recognition speed in the evaluation of performance. The tag for license plate will be able to provide to the custom administrator and goods manager in various telemetries services.

UHF RFID Metal Tag Applying to License Plate using Metal Shielding and Watertight Methods

Graduate School of Design & IT, Dongseo University

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper describes a design for RFID (Radio Frequency Identification) tag using license plate attached the vehicle bumper in 900 MHz band. The implemented...

UHF RFID Metal Tag Applying to License Plate using Metal Shielding and Watertight Methods

Online veröffentlicht: 03. Nov. 2017

Seitenbereich: 549 - 563

DOI: https://doi.org/10.21307/ijssis-2017-367

Schlüsselwörter
Metal Tag, UHF RFID, Metal Shielding, Corrosion Protection, Watertight Method

© 2009 Gi-Hyun Hwang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

UHF RFID Metal Tag Applying to License Plate using Metal Shielding and Watertight Methods

Online veröffentlicht: 03. Nov. 2017

Seitenbereich: 549 - 563

DOI: https://doi.org/10.21307/ijssis-2017-367

SchlüsselwörterMetal Tag, UHF RFID, Metal Shielding, Corrosion Protection, Watertight Method

© 2009 Gi-Hyun Hwang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Schlüsselwörter
Metal Tag, UHF RFID, Metal Shielding, Corrosion Protection, Watertight Method