Rotation center calibration based on line laser rotating platform
, und
25. Sept. 2019
Über diesen Artikel
Online veröffentlicht: 25. Sept. 2019
Seitenbereich: 48 - 52
DOI: https://doi.org/10.21307/ijanmc-2019-033
Schlüsselwörter
© 2019 Lei Doudou et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
COMPARISON BETWEEN ROTATION CENTER CALIBRATION METHODS
| calibration method | Advantage | Disadvantage | Applicable situation |
|---|---|---|---|
|
|
It can reduce the error in the measurement process with high precision. | During the fitting process, the number of iterations is variable and it takes a lot of time. | Due to interference of factors such as position and angle, the extracted edge contour is elliptical. Or the calibration block is elliptical. |
|
|
The principle is simple and easy to understand, and the accuracy is high. | It is necessary to select multiple locations for testing, and to obtain an average value, which takes a lot of time. | Suitable for circular rotating platforms. Or a circular calibration block. The point cloud obtained by scanning has higher precision. |
|
|
The operation is simple, no need to manually paste the mark points, and the speed is fast. | The accuracy is low. | Suitable for circular rotating platforms. Or a circular calibration block. |