This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Węglorz, M. (2014). Selected Aspects of Sustainable Civil Engineering in research works of professor Andrzej Ajdukiewicz. Architecture Civil Engineering Environment, 7(1), 41–47.WęglorzM. (2014). Selected Aspects of Sustainable Civil Engineering in research works of professor Andrzej Ajdukiewicz. , 7(1), 41–47.Search in Google Scholar
Miloševič, P. (2012). Sustainable Eco Planning Strategies in East Europe (Case Study of Belgrade). Architecture Civil Engineering Environment, 5(4), 29–42.MiloševičP. (2012). Sustainable Eco Planning Strategies in East Europe (Case Study of Belgrade). , 5(4), 29–42.Search in Google Scholar
Heim, D., Mrowiec, A., Prałat, K., and Mucha, M. (2018). Influence of Tylose MH1000 content on gypsum thermal conductivity. J. Mater. Civ. Eng., 30(3), March.HeimD.MrowiecA.PrałatK., and MuchaM. (2018). Influence of Tylose MH1000 content on gypsum thermal conductivity. , 30(3), March.10.1061/(ASCE)MT.1943-5533.0002177Search in Google Scholar
Arpe, H. J. (1984). Ullmann’s Encyclopedia of Industrial Chemistry. Calcium Sulfate. Vol.A4, Wiley-VCH, Verlag, Germany, 555–584.ArpeH. J. (1984). Ullmann’s Encyclopedia of Industrial Chemistry. . Vol.A4, Wiley-VCH, Verlag, Germany, 555–584.Search in Google Scholar
Duggal, S. K., Building Materials, A.A. Balkema Publishers, Rotterdam, 1998.DuggalS. K., , A.A. Balkema Publishers, Rotterdam, 1998.Search in Google Scholar
Ragsdale, L. A., Raynham, E. A., Building Materials Technology, Edward Arnold, London, 1972.RagsdaleL. A.RaynhamE. A., , Edward Arnold, London, 1972.Search in Google Scholar
Arikan, M., and Sobolev, K. (2002). The optimization of a gypsum-based composite material. Cem. Concr. Res., 32(11), 1725–1728.ArikanM., and SobolevK. (2002). The optimization of a gypsum-based composite material. , 32(11), 1725–1728.10.1016/S0008-8846(02)00858-XSearch in Google Scholar
De Sensale, G. M. (2010). Effect of rice – husk ash on durability of cementitious materials. Cem. Concr. Compos., 32, 718–725.De SensaleG. M. (2010). Effect of rice – husk ash on durability of cementitious materials. , 32, 718–725.10.1016/j.cemconcomp.2010.07.008Search in Google Scholar
Kim, S. (2009). Incombustibility, physic-mechanical properties and TVOC emission behavior of the gypsum-rice husk boards for wall and ceiling materials for construction. Ind. Crops. Prod., 29, 381–387.KimS. (2009). Incombustibility, physic-mechanical properties and TVOC emission behavior of the gypsum-rice husk boards for wall and ceiling materials for construction. , 29, 381–387.10.1016/j.indcrop.2008.07.006Search in Google Scholar
Khali, A. A., Tawfik, A., Hegazy, A. A., and El-Shahat, M. F. (2013). Effect of different modes of silica on the physical and mechanical properties of plaster composites. J. Mater. Constr., 63(312), 529–537.KhaliA. A.TawfikA.HegazyA. A., and El-ShahatM. F. (2013). Effect of different modes of silica on the physical and mechanical properties of plaster composites. , 63(312), 529–537.10.3989/mc.2013.04312Search in Google Scholar
Maghsoudi, K., and Motahari, S. (2018). Mechanical, thermal, and hydrophobic properties of silica aerogelepoxy composites. J. Appl. Polym. Sci., 135(3), 45706–45714.MaghsoudiK., and MotahariS. (2018). Mechanical, thermal, and hydrophobic properties of silica aerogelepoxy composites. , 135(3), 45706–45714.10.1002/app.45706Search in Google Scholar
Sletnes, M., Jelle, B. P., and Risholt, B. (2017). Feasibility study of novel integrated aerogel solutions. Energy Procedia, 132, 327–332.SletnesM.JelleB. P., and RisholtB. (2017). Feasibility study of novel integrated aerogel solutions. , 132, 327–332.10.1016/j.egypro.2017.09.740Search in Google Scholar
Chen, J. J., Ng, P. L., Li, L. G., and Kwan, A. K. H. (2017). Production of high-performance concrete by addition of fly ash microsphere and condensed silica fume. Procedia Eng., 172, 165–171.ChenJ. J.NgP. L.LiL. G., and KwanA. K. H. (2017). Production of high-performance concrete by addition of fly ash microsphere and condensed silica fume. , 172, 165–171.10.1016/j.proeng.2017.02.045Search in Google Scholar
Kwan, A. K. H., and Li, Y. (2013). Effects of fly ash microsphere on rheology, adhesiveness and strength of mortar. Constr. Build. Mater., 42, 137-145.KwanA. K. H., and LiY. (2013). Effects of fly ash microsphere on rheology, adhesiveness and strength of mortar. , 42, 137-145.10.1016/j.conbuildmat.2013.01.015Search in Google Scholar
Kwan, A. K. H., and Chen, J. J. (2013). Adding fly ash microsphere to improve packing density, flowability and strength of cement paste. Powder Technol., 234, 19–25.KwanA. K. H., and ChenJ. J. (2013). Adding fly ash microsphere to improve packing density, flowability and strength of cement paste. , 234, 19–25.10.1016/j.powtec.2012.09.016Search in Google Scholar
Hewit, G. F., Shires, G. L., and Bott, T. R. (1994). Process heat transfer. CRC Press LCC, New York, 16–18.HewitG. F.ShiresG. L., and BottT. R. (1994). . CRC Press LCC, New York, 16–18.Search in Google Scholar
Adrien, J., Meille, S., Tadier, S., Maire, E., and Sasaki, L. (2016). In-situ X-ray tomographic monitoring of gypsum plaster setting. Cem. Concr. Res., 82, 107–116.AdrienJ.MeilleS.TadierS.MaireE., and SasakiL. (2016). In-situ X-ray tomographic monitoring of gypsum plaster setting. , 82, 107–116.10.1016/j.cemconres.2015.12.011Search in Google Scholar
Karni, J., and Karni, E. (1995). Gypsum in construction: Origin and properties. Mater. Struct., 28(2), 92–100.KarniJ., and KarniE. (1995). Gypsum in construction: Origin and properties. , 28(2), 92–100.10.1007/BF02473176Search in Google Scholar
Yu, Q. L., and Brouwers, H. J. H. (2012). Thermal properties and microstructure of gypsum board and its dehydration products: A theoretical and experimental investigation. Fire Mater., 36(7), 575–589.YuQ. L., and BrouwersH. J. H. (2012). Thermal properties and microstructure of gypsum board and its dehydration products: A theoretical and experimental investigation. , 36(7), 575–589.10.1002/fam.1117Search in Google Scholar
Carson, J. K., Lovatt, S. J., Tanner, D. J., and Cleland, A. C. (2005). Thermal conductivity bounds for isotropic, porous materials. Int. J. Heat Mass Transfer, 48(11), 2150–2158.CarsonJ. K.LovattS. J.TannerD. J., and ClelandA. C. (2005). Thermal conductivity bounds for isotropic, porous materials. , 48(11), 2150–2158.10.1016/j.ijheatmasstransfer.2004.12.032Search in Google Scholar
Martias, C., Joliff, Y., Nait-Ali, B., Rogez, J., and Favotto, C. (2013). A new composite based on gypsum matrix and mineral additives: Hydration process of the matrix and thermal properties at room temperature. Thermochimica Acta, 567, 15–26.MartiasC.JoliffY.Nait-AliB.RogezJ., and FavottoC. (2013). A new composite based on gypsum matrix and mineral additives: Hydration process of the matrix and thermal properties at room temperature. , 567, 15–26.10.1016/j.tca.2013.03.001Search in Google Scholar
Gruescu, C., Giraud, A., Homand, F., Kondo, D., and Do, D. P. (2007). Effective thermal conductivity of partially saturated porous rocks. Int. J. Solids Struct., 44(3–4), 811–833.GruescuC.GiraudA.HomandF.KondoD., and DoD. P. (2007). Effective thermal conductivity of partially saturated porous rocks. , 44(3–4), 811–833.10.1016/j.ijsolstr.2006.05.023Search in Google Scholar
Kamseu, E., Bignozzi, M. C., Melo, U. C., Leonelli, C., and Sglavo, V. M. (2013). Design of inorganic polymer cements: Effects of matrix strengthening on microstructure. Constr. Build. Mater., 38, 1135–1145.KamseuE.BignozziM. C.MeloU. C.LeonelliC., and SglavoV. M. (2013). Design of inorganic polymer cements: Effects of matrix strengthening on microstructure. , 38, 1135–1145.10.1016/j.conbuildmat.2012.09.033Search in Google Scholar
Kamseu, E., Nait-Ali, B., Bignozzi, M. C., Leonelli, C., Rossignol, S., and Smith, D. S. (2012). Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements. J. Eur. Ceram. Soc., 32(8), 1593–1603.KamseuE.Nait-AliB.BignozziM. C.LeonelliC.RossignolS., and SmithD. S. (2012). Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements. , 32(8), 1593–1603.10.1016/j.jeurceramsoc.2011.12.030Search in Google Scholar
Ru, W., Xin-Gui, L., and Pei-Ming, W. (2006). Influence of polymer on cement hydration in SBR-modified cement pastes. Cem. Concr. Res., 36(9), 1744–1751.RuW.Xin-GuiL., and Pei-MingW. (2006). Influence of polymer on cement hydration in SBR-modified cement pastes. , 36(9), 1744–1751.10.1016/j.cemconres.2006.05.020Search in Google Scholar
Choi, H., and Noguchi, T. (2015). Modeling of mechanical properties of concrete mixed with expansive additive. Int. J. Concr. Struct. Mater., 9(4), 391–399.ChoiH., and NoguchiT. (2015). Modeling of mechanical properties of concrete mixed with expansive additive. , 9(4), 391–399.10.1007/s40069-015-0113-8Search in Google Scholar
Yan, Y., Yu, Z., and Yingzi, Y. (2012). Incorporation superabsorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC). Constr. Build. Mater., 28(1), 139–145.YanY.YuZ., and YingziY. (2012). Incorporation superabsorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC). , 28(1), 139–145.10.1016/j.conbuildmat.2011.08.032Search in Google Scholar
Knapen, E., and Van Gemert, D. (2009). Cement hydration and microstructure formation in the presence of water-soluble polymers. Cem. Concr. Res., 39(1), 6–13.KnapenE., and Van GemertD. (2009). Cement hydration and microstructure formation in the presence of water-soluble polymers. , 39(1), 6–13.10.1016/j.cemconres.2008.10.003Search in Google Scholar
Garbalińska, H., and Strzałkowski, J. (2016). Thermal and strength properties of lightweight concretes with the addition of aerogel particles. Adv. Cem. Res., 28(9), 567–575.GarbalińskaH., and StrzałkowskiJ. (2016). Thermal and strength properties of lightweight concretes with the addition of aerogel particles. , 28(9), 567–575.10.1680/jadcr.16.00032Search in Google Scholar
Schiavoni, S., D’Alessandro, F., Bianchi, F., and Astrubali, F. (2016). Insulation materials for the building sector: A review and comparative analysis. Renew. Sust. Energ. Rev., 62, 988–1011.SchiavoniS.D’AlessandroF.BianchiF., and AstrubaliF. (2016). Insulation materials for the building sector: A review and comparative analysis. ., 62, 988–1011.10.1016/j.rser.2016.05.045Search in Google Scholar
Pichór, W. (2009). Properties of fiber reinforced cement composites with cenospheres from coal ash. Proc. Int. Symp. Brittle Matrix Composites 9, Editors: Brandt, A. M., Olek, J., Marshall, I. H., 245–254.PichórW. (2009). Properties of fiber reinforced cement composites with cenospheres from coal ash. 9, Editors: BrandtA. M.OlekJ.MarshallI. H., 245–254.10.1533/9781845697754.245Search in Google Scholar
Baspinar, M. S., and Kahraman, E. (2011). Modifications in the properties of gypsum construction element via addition of expanded macroporous silica granules. Constr. Build. Mater., 25, 3327–3333.BaspinarM. S., and KahramanE. (2011). Modifications in the properties of gypsum construction element via addition of expanded macroporous silica granules. ., 25, 3327–3333.10.1016/j.conbuildmat.2011.03.022Search in Google Scholar
Hand, R. J. (1997). Calcium sulphate hydrates. Brit. Ceram. Trans., 96(3), 116–120.HandR. J. (1997). Calcium sulphate hydrates. , 96(3), 116–120.Search in Google Scholar
Dudek, E., Mosiadz, M., and Orzepowski, M. (2007). Uncertainties of resistors temperature coefficients. Meas. Sci. Rev., 7(3), 23–26.DudekE.MosiadzM., and OrzepowskiM. (2007). Uncertainties of resistors temperature coefficients. , 7(3), 23–26.Search in Google Scholar
Glinicki, M. A., Jaskulski, R., Pichór, W., Dąbrowski, M., and Sobczak, M. (2015). Investigation of thermal properties of shielding concrete. Proc. Int. Symp. Brittle Matrix Composites 9, Editors: Brandt, A. M., Olek, J., Glinicki, M. A., Leung, C. K. Y., Lis, J., 371–380.GlinickiM. A.JaskulskiR.PichórW.DąbrowskiM., and SobczakM. (2015). Investigation of thermal properties of shielding concrete. 9, Editors: BrandtA. M.OlekJ.GlinickiM. A.LeungC. K. Y.LisJ., 371–380.Search in Google Scholar
Kušnerová, M., Valíček, J., Harničárová, M., Hryniewicz, T., Rokosz, K., Palková, Z., Václavík, V., Řepka, M., and Bendová, M. (2013). A proposal for simplifying the method of evaluation of uncertainties in measurement results. Meas. Sci. Rev., 13(1), 1–6.KušnerováM.ValíčekJ.HarničárováM.HryniewiczT.RokoszK.PalkováZ.VáclavíkV.ŘepkaM., and BendováM. (2013). A proposal for simplifying the method of evaluation of uncertainties in measurement results. , 13(1), 1–6.10.2478/msr-2013-0007Search in Google Scholar
Mróz, P., and Mucha, M. (2017). Hydration kinetics of calcium sulphate hemihydrate modified by water soluble polymer. Int. J. Eng. Res. Sci., 3(6), 5–13.MrózP., and MuchaM. (2017). Hydration kinetics of calcium sulphate hemihydrate modified by water soluble polymer. , 3(6), 5–13.10.25125/engineering-journal-IJOER-MAY-2017-25Search in Google Scholar