Reliability-Based Evaluation Of Loss Due To Distribution Of Nonstructural Components In Height

[1]Krawinkler H., Medina R. (2004). Seismic demands for nondeteriorating frame structures and their dependence on ground motions, Report No. PEER 2003/15, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, United State. Search in Google Scholar

[2]Aslani H., Miranda E. (2005). Probabilistic earthquake loss estimation and loss disaggregation in buildings, Report 157, Ph.D. Dissertation, John A. Blume Earthquake Engineering Center, Stanford University, United State. Search in Google Scholar

[3]Haselton C. B., Goulet C. A., Mitrani-Reiser J., Beck J. L., Deierlein G. G., Porter K. A., Stewart J. P., Taciroglu E. (2008). An Assessment to Benchmark the Seismic Performance of a Code-Conforming Reinforced Concrete Moment-Frame Building”, PEER Report 2007/12, Pacific Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley, United States. Search in Google Scholar

[4]Haselton C. B., Deierlein G. G. (2007). Assessing Seismic Collapse Safety of Modern Reinforced Concrete Frame Buildings, Technical Report 156, Ph.D. Dissertation, John A. Blume Earthquake Engineering Center, Stanford University, United States. Search in Google Scholar

[5]Filiatrault A., Kuan S., Tremblay R. (2004). Shake Table Testing of Bookcase – partition Wall Systems, Canadian Journal of Civil Engineering, (31)4, 664–676.10.1139/l04-031 Search in Google Scholar

[6]Chock G., Robertson I., Nicholson P., Brandes H., Medley E., Okubo P., Hirshorn B., Sumada J., Kindred T., Linurna G., Sarwar A., Dal Pino J., Holmes W. (2006). Compilation of Observations of the October 15, 2006, Kiholo Bay (Mw 6.7) and Mahukona (Mw 6.0) Earthquakes, Hawaii, Report 31, Earthquake Engineering Research Institute, Oakland, United State. Search in Google Scholar

[7]Gupta A., Krawinkler H. (1999). Seismic Demand for Performance Evaluation of Steel Moment Resisting Frames Structures, Report 132, Ph.D. Dissertation, John A. Blume Earthquake Engineering Center, Stanford University, United State. Search in Google Scholar

[8]McGavin G., Patrucco H. (1994). Survey of Non Structural Damage to Healthcare Facilities in the January 17, 1994 Northridge Earthquake, Report prepared for HMC Group, Ontario, Canada. Search in Google Scholar

[9]Boroschek R., Retamales R. (2001). Damage Observed in El Salvador’s Public Hospital System during the January 13, 2001 Earthquake, WHO/PAHO Collaborating Center for Disaster Mitigation in Health Facilities, University of Chile, Santiago, Chile. Search in Google Scholar

[10]Miranda E., Mosqueda G., Retamales R., Pekcan G. (2012). Performance of Nonstructural Components during the 27 February 2010 Chile Earthquake, Earthquake Spectra, (28)1, 453–471.10.1193/1.4000032 Search in Google Scholar

[11]Taghavi S., Miranda E. (2003). Response of Nonstructural Building Elements”, Report PEER 2003/05, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, United State. Search in Google Scholar

[12]Filiatrault A., Sullivan T. (2014). Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering, Earthquake Engineering and Engineering Vibration, (13)1, 17-46, DOI:10.1007/s11803-014-0238-9.10.1007/s11803-014-0238-9 Search in Google Scholar

[13]Soong T.T. (1995). Seismic Behavior of Nonstructural Elements-State-of-the-Art-Report, Proc. of the 10th European Conference on Earthquake Engineering, Vienna, Austria, 1599–1606. Search in Google Scholar

[14]Filiatrault A., Christopoulos C. (2002). Guidelines, Specifications, and Seismic Performance Characterization of Nonstructural Building Components and Equipment,” Report PEER 2002/05, Pacific Earthquake Engineering Research Center, Berkeley, United State. Search in Google Scholar

[15]Porter K. A. (2005). A Taxonomy of Building Components for Performance-Based Earthquake Engineering, Department of Civil Engineering and Applied Mechanics California Institute of Technology. PEER Award number EEC-9701568, Report PEER 2005/03, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, United State. Search in Google Scholar

[16]Petak W. J., Alesch D. J. (2008). Structural and Nonstructural Earthquake Design: The Challenge of Integrating Specialty Areas in Designing Complex, Critical Facilities, Technical Report MCEER-080014, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo State University of New York, United State. Search in Google Scholar

[17]NIBS (2003). Multi-hazard Loss Estimation Methodology, Earthquake Model, National Institute of Building Sciences and Federal Emergency Management Agency, Report. HAZUS-MH Technical Manual, Washington D.C., United State. Search in Google Scholar

[18]NIST, UNIFORMAT II Elemental Classification for Building Specifications, Cost Estimating, and Cost Analysis, National Institute of Standards and Technology, Report. NISTIR 6389, Washington D.C., United State, 1999, Retrieved 05-May -2016: http://www.bfrl.nist.gov/oae/publications/nistirs/6389.pdf Search in Google Scholar

[19]FEMA P-58-1 (2012). Seismic Performance Assessment of Buildings, Volume 1 – Methodology, Building seismic safety council for the Federal Emergency Management Agency, Report. FEMA P58-1, Federal Emergency Management Agencies, Washington, D.C., United State. Search in Google Scholar

[20]Porter K .A., Johnson G., Sheppard R., Bachman R. (2011). Response to discussions of fragility of mechanical, electrical and plumbing equipment, Earthquake Spectra, (27)1, 229–233.10.1193/1.3527279 Search in Google Scholar

[21]ATC-58, Guidelines for seismic performance assessment of buildings, Applied Technology Council, Washington D.C., United State, 2011, Retrieved 13-October-2014: https://www.atccouncil.org/pdfs/ATC-58-50persentDraft.pdf Search in Google Scholar

[22]FEMA P-58-3, Seismic Performance Assessment of Buildings, Volume 3 – Supporting Electronic Materials and Background Documentation: 3.1 Performance Assessment Calculation Tool (PACT), Version 2.9.65, Building seismic safety council for the Federal Emergency Management Agency, Report. FEMA P-58-3, Federal Emergency Management Agencies, Washington D.C., United State, 2012 Search in Google Scholar

[23]Ramirez C., Miranda E. (2009). Building-specific loss estimation methods & tools for simplified performance-based earthquake engineering, Report 171, Ph.D. Dissertation, John A. Blume Earthquake Engineering Center, Stanford University, United States. Search in Google Scholar

[24]French S. P. (2012). Modeling Nonstructural Damage for Metropolitan Building Stocks, Proc. of the 15^th World Conference on Earthquake Engineering, Lisbon, Portugal, 950–960. Search in Google Scholar

[25]Balaboni B (2014). RSMeans Square Foot Costs 2014, 35^th edition, RSMeans Engineering Department, New York, United States. Search in Google Scholar

[26]ASCE/SEI 7-10, Minimum design loads for buildings and other structures, American Society of Civil Engineers, Reston, Virginia, 2010. Search in Google Scholar

[27]AISC-LRFD-2005, Manual of Steel Construction, American Institute of Steel Construction, Chicago, Illinois, 2005. Search in Google Scholar

[28]Ibarra L. F., Medina R. A., Krawinkler H. (2005). Hysteretic models that incorporate strength and stiffness deterioration, Earthquake Engineering and Structural Dynamic, (34)12, 1489–1511.10.1002/eqe.495 Search in Google Scholar

[29]Lignos D. G., Krawinkler H. (2012). Sideway Collapse of deteriorating structural system under seismic excitations”, Report 177, Ph.D. Dissertation, John A. Blume Earthquake Engineering Center, Stanford University, United State. Search in Google Scholar

[30]Lignos D. G., Krawinkler H., Whittaker A. S. (2011). Prediction and validation of sideway collapse of two scale models of a 4-story steel moment frame,” Earthquake Engineering and Structural Dynamics, (40)7, 807–825.10.1002/eqe.1061 Search in Google Scholar

[31]OpenSees (2009). Open system for earthquake engineering simulation, Pacific Earthquake Engineering Research Center, Berkeley, CA. Search in Google Scholar

[32]Zareian F., Medina R. A. (2010). A practical method for proper modeling of structural damping in inelastic plane Structural systems, Computers & Structures, 88(1-2), 45–53.10.1016/j.compstruc.2009.08.001 Search in Google Scholar

[33]Lignos D. G. (2014). Modeling Steel Moment Resisting Frames with OpenSees, OpenSees Workshop, University of California, Berkeley, United States, 102–117. Search in Google Scholar

[34]Gupta. A., McDonald B. M. (2008). Performance of Building Structures during the October 15, 2006 Hawaii Earthquake, Proc. of the 14th World Conference on Earthquake Engineering, Beijing, China, 100–108. Search in Google Scholar

[35]Haj Najafi L., Tehranizadeh M. (2015). Ground motion selection and scaling in practice, Peryodica Polytechnica – Civil Engineering, 59(2), 233–248. DOI:10.3311/PPci.7808.10.3311/PPci.7808 Search in Google Scholar

[36]PEER Strong Ground Motion Database, Retrieved 05-May-2016: http://peer.berkeley.edu/peer_ground_motion_database Search in Google Scholar

[37]COSMOS Ground Motions Databases, Retrieved 05-May-2016: http://db.cosmos-eq.org/scripts/default.plx Search in Google Scholar

[38]K-Net, Strong-motions Seismograph Networks, Retrieved 05-May -2016: http://www.k-net.bosai.go.jp Search in Google Scholar

[39]NIST/GCR 11-917-14, Soil-Structure Interaction for Building Structures, NEHRP Consultants Joint Venture for the National Institute of Standards and Technology, Report. NIST/GCR 11-917-14, Gaithersburg, Maryland, 2011. Search in Google Scholar

[40]Nau J., Hall W. (1984). Scaling methods for earthquake response spectra, Journal of Structural Engineering (ASCE), (110)2, 91–109.10.1061/(ASCE)0733-9445(1984)110:7(1533) Search in Google Scholar

[41]Shome N., Cornell C. A., Bazzurro P., Carballo J. E. (1998). Earthquakes, records, and nonlinear responses, Earthquake Spectra, 14(3), 469–500.10.1193/1.1586011 Search in Google Scholar

[42]Mehanny S. S. F. (1999). Modeling and Assessment of Seismic Performance of Composite Frames with Reinforced Concrete Columns and Steel Beams, Ph.D. Dissertation, Dept. of Civil and Environmental Engineering, Stanford University, California, United States. Search in Google Scholar

[43]Alavi B., Krawinkler H. (2000). Consideration of near-fault ground motion effects in seismic design, Proceeding Of the 12th World Conference on earthquake Engineering, Auckland, New Zealand. 2664–2672. Search in Google Scholar

[44]Thoft-Christensen P., Murotsu Y. (1986). Application of Structural System Reliability Theory, SpringerVerlag, United States.10.1007/978-3-642-82764-8 Search in Google Scholar

[45]Ibrahim Y. (1991). General strategy for structural systems reliability analysis, Journal of Structural Engineering, ASCE, (117)3, 789–807.10.1061/(ASCE)0733-9445(1991)117:3(789) Search in Google Scholar

[46]Uzielli M., Duzguny S., Vangelstenz B. V. (2006). A first-order second-moment framework for probabilistic estimation of vulnerability to landslides, International Geotechnical hazard Engineering Conference, Lillehammer, Norway. Search in Google Scholar

[47]Raviprakash A. V., Prabu B., Alagumurthi N. (2010). Mean value first order second moment analysis of buckling of axially loaded thin plates with random geometrical imperfections, International Journal of Engineering Science and Technology, 2(1), 150–162.10.4314/ijest.v2i4.59283 Search in Google Scholar

[48]Liel A. B., Haselton C. B., Deierlein G. G., Baker J. W. (2009). Incorporating modeling uncertainties in the assessment of seismic collapse risk of buildings, Structural Safety, 31(1), 197–211.10.1016/j.strusafe.2008.06.002 Search in Google Scholar

[49]Vamvatsikos D., Cornell C. A. (2002). The incremental dynamic analysis and its application to performance-based earthquake engineering, Proc. of the 12 the European Conference on Earthquake Engineering. Search in Google Scholar

[50]Miranda E., Ramirez C. M. (2009). Building-Specific Loss Estimation Methods & Tools For Simplified Performance-Based Earthquake Engineering, Report 171, Ph.D. Dissertation, John A. Blume Earthquake Engineering Center, Stanford University, United State. Search in Google Scholar

[51]Ruiz-García J., Miranda E. (2006). Residual displacement ratios for assessment of existing structures, Earthquake Engineering & Structural Dynamics, 35(3), 315–336.10.1002/eqe.523 Search in Google Scholar

[52]ASCE/SEI 41-06, Seismic Rehabilitation of Existing Buildings, American Society of Civil Engineers, Reston, United State, 2007. Search in Google Scholar

[53]FEMA P695, Quantification of Building Seismic Performance Factors, Building seismic safety council for the Federal Emergency Management Agency, Report. FEMA P695, Federal Emergency Management Agencies, Washington, D.C., United State, 2009. Search in Google Scholar

[54]Ruiz-García J., Miranda E. (2008). Probabilistic seismic assessment of residual drift demands in existing buildings, Proc. of the 14^th World Conference on Earthquake Engineering, Beijing, China. Search in Google Scholar