Effect of the Roof Slope on the Cost Variation of Residential Houses

[1] Ministry of Infrastructures (2012. Basic Housing Construction Instructions for Protection against Natural and Manmade Disasters in Rural Areas, Rwanda Housing Authority, Kigali, RwandaSearch in Google Scholar

[2] Ministry of Natural Resources (2017). Rwanda National Land Use Planning Guidelines, Kigali, RwandaSearch in Google Scholar

[3] Ministry of Infrastructures (2015). Rwanda Building Code, 1st edition. Kigali, RwandaSearch in Google Scholar

[4] Jwo-Hua Chen (2012). A Study on the Selection of Optimal Roof Type for Low-rise buildings group in a View of Wind Pressures Action. International Conference on Advances in Computational Modeling and Simulation. Procedia Engineering, 31, 1149 – 1154. DOI:10.1016/j.proeng.2012.01.115510.1016/j.proeng.2012.01.1155Search in Google Scholar

[5] Siti Halipah Ibrahim,S.H., Roslan, Q., Affandi, R., Razali, A.W., Samat,Y.S., Nawi Mohd N.M.(2018). Study On The Optimum Roof Type With 30° Roof Angle To Enhance Natural Ventilation And Air Circulation Of A Passive Design, International Journal of Technology, 8, 1692-1701. DOI: https://doi.org/10.14716/ijtech.v9i8.275910.14716/ijtech.v9i8.2759Search in Google Scholar

[6] Shen, S. W. A. Z.(2012). Effects of Roof Pitch on Air Flow and Heating Load of Sealed and Vented Attics for Gable-Roof Residential Building. Sustainability, 4, 1999-2021.10.3390/su4091999Search in Google Scholar

[7] Guyer, J.P. (2009). Introduction to Roofing Systems, Continuing Education and Development, Inc. 9. Greyridge Farm Court Stony Point, NY 10980Search in Google Scholar

[8] Stramit Corporation Pty limited (2017). Stramit-Roof-Slope. Design-GuideSearch in Google Scholar

[9] Ulubeylia, S., Kazazb, A., Er, B., Birgonul M.T. (2014). Comparison of Different Roof Types in Housing Projects in Turkey: Cost Analysis. Procedia - Social and Behavioral Sciences, 119, 20 – 29.10.1016/j.sbspro.2014.03.005Search in Google Scholar

[10] Radziszewska-Zielina, E.(2014). A comparative analysis of selected parameters of roofing used in the Polish construction industry. SSP - Journal of Civil Engineering, 9(1), 41-50. DOI: 10.2478/sspjce-2014-000510.2478/sspjce-2014-0005Search in Google Scholar

[11] Melo V. T., Renato L. F., Adhemar P. M., Marcos E. B., Diego A. M.(2014). Evaluation of roof slope and exposure with different roofing materials in reduced models of animal production facilities in spring and summer. Eng. Agríc., Jaboticabal, 34(6), 1030-1038.10.1590/S0100-69162014000600001Search in Google Scholar

[12] Ghaedi, A., Ghaedi, H., Ghaedi, H.(2012) The role of roof shapes in design of green building, systems (case study: Iran, Bandar Abbas). ICESD 2012, 5-7. DOI: 10.1016/j.apcbee.2012.03.05510.1016/j.apcbee.2012.03.055Search in Google Scholar

[13] Mavridou, T., Doulos, L.T. (2017). Evaluation of Different Roof Types Concerning Daylight in Industrial Buildings during the Initial Design Phase: Methodology and Case Study. Buildings, 9 (7). DOI: 10.3390/buildings9070170.10.3390/buildings9070170Search in Google Scholar

[14] Singh, J., Roy, A.K.(2019). Effects of roof slope and wind direction on wind pressure distribution on the roof of a square plan pyramidal low-rise building using CFD simulation. International Journal of Advanced Structural Engineering. https://doi.org/10.1007/s40091-019-0227-310.1007/s40091-019-0227-3Search in Google Scholar

[15] Morgado, J., Flores-Colen, I., De Brito, J., Silva, A. (2017). Maintenance Planning of Pitched Roofs in Current Buildings. Journal of Construction Engineering and Management, 143 (7). doi: 10.1061/(ASCE)CO.1943-7862.000131610.1061/(ASCE)CO.1943-7862.0001316Search in Google Scholar

[16] Syazili, F., (2005). Chapter 8 roof lecturer notes. Universiti Teknologi MalaysiaSearch in Google Scholar

[17] Mbereyaho Leopold, Abaho G. Gershome, Mutabaruka Jean de Dieu, Ndayisenga Jean Claude, Niyomwungeri Evariste, and Nsabimana Jacques (2019). Investigation on Application of Rwanda Building Standards in Local Construction Industry. Rwanda Journal of Engineering, Science, Technology and Environment, Volume 2(I),1-17. https://dx.doi.org/10.4314/rjeste.v2i1.310.4314/rjeste.v2i1.3Search in Google Scholar