<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper presents some of the results from a large experimental program undertaken at the Department of Civil Engineering of Damascus University. The project aims to study the ability to reinforce and strengthen the concrete by bars from Epoxy polymer reinforced with glass fibers (GFRP) and compared with reinforce concrete by steel bars in terms of mechanical properties. Five diameters of GFRP bars, and steel bars (4mm, 6mm, 8mm, 10mm, 12mm) tested on tensile strength tests. The test shown that GFRP bars need tensile strength more than steel bars. The concrete beams measuring (15cm wide × 15cm deep × and 70cm long) reinforced by GFRP with 0.5 vol.% ratio, then the concrete beams reinforced by steel with 0.89 vol.% ratio. The concrete beams tested on deflection test. The test shown that beams which reinforced by GFRP has higher deflection resistance, than beams which reinforced by steel. Which give more advantage to reinforced concrete by GFRP.</p></abstract>

The paper presents some of the results from a large experimental program undertaken at the Department of Civil Engineering of Damascus University. The project aims to study the ability to reinforce and strengthen the concrete by bars from Epoxy polymer reinforced with glass fibers (GFRP) and compared with reinforce concrete by steel bars in terms of mechanical properties. Five diameters of GFRP bars, and steel bars (4mm, 6mm, 8mm, 10mm, 12mm) tested on tensile strength tests. The test shown that GFRP bars need tensile strength more than steel bars. The concrete beams measuring (15cm wide × 15cm deep × and 70cm long) reinforced by GFRP with 0.5 vol.% ratio, then the concrete beams reinforced by steel with 0.89 vol.% ratio. The concrete beams tested on deflection test. The test shown that beams which reinforced by GFRP has higher deflection resistance, than beams which reinforced by steel. Which give more advantage to reinforced concrete by GFRP.

Preparation and characterization of glass fibers – polymers (epoxy) bars (GFRP) reinforced concrete for structural applications

Applied Physics Department – Higher institute for applied sciences and technology (HIAST)

Selected Scientific Papers - Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The paper presents some of the results from a large experimental program undertaken at the Department of Civil Engineering of Damascus University. The project...

Preparation and characterization of glass fibers – polymers (epoxy) bars (GFRP) reinforced concrete for structural applications

Online veröffentlicht: 27. Juli 2016

Seitenbereich: 15 - 22

DOI: https://doi.org/10.1515/sspjce-2016-0002

Schlüsselwörter
GFRP bars, steel bars, tensile strength, deflection

© 2016 Saeed Alkjk et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Preparation and characterization of glass fibers – polymers (epoxy) bars (GFRP) reinforced concrete for structural applications

Online veröffentlicht: 27. Juli 2016

Seitenbereich: 15 - 22

DOI: https://doi.org/10.1515/sspjce-2016-0002

SchlüsselwörterGFRP bars, steel bars, tensile strength, deflection

© 2016 Saeed Alkjk et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
GFRP bars, steel bars, tensile strength, deflection