<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>By using the wrought aluminum alloys can be created castings with higher mechanical properties than the castings made of standard foundry aluminum alloys, but it is necessary to handle the process of making sound castings without any defects such as hot tears and shrinkage porosity. In experiments, we have been studied of wrought aluminum alloy EN AW-2024 which has been processed by the casting with crystallization under pressure with forced flow. Castings were heat treated by standard T6 heat treatment.</p>
</abstract>

By using the wrought aluminum alloys can be created castings with higher mechanical properties than the castings made of standard foundry aluminum alloys, but it is necessary to handle the process of making sound castings without any defects such as hot tears and shrinkage porosity. In experiments, we have been studied of wrought aluminum alloy EN AW-2024 which has been processed by the casting with crystallization under pressure with forced flow. Castings were heat treated by standard T6 heat treatment.

EN AW-2024 Wrought Aluminum Alloy Processed by Casting with Crystallization under Pressure

Slovak University of Technology in Bratislava

Faculty of Mechanical Engineering, Institute of Technologies and Materials

Faculty of Materials Science and Technology in Trnava, Institute of Materials Science

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

By using the wrought aluminum alloys can be created castings with higher mechanical properties than the castings made of standard foundry aluminum alloys, but...

EN AW-2024 Wrought Aluminum Alloy Processed by Casting with Crystallization under Pressure

Online veröffentlicht: 18. Nov. 2017

Seitenbereich: 109 - 116

DOI: https://doi.org/10.1515/scjme-2017-0024

Schlüsselwörter
wrought aluminum alloy, EN AW-2024, casting with crystallization under pressure, mechanical properties

© 2017 Branislav Vanko et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

EN AW-2024 Wrought Aluminum Alloy Processed by Casting with Crystallization under Pressure

Online veröffentlicht: 18. Nov. 2017

Seitenbereich: 109 - 116

DOI: https://doi.org/10.1515/scjme-2017-0024

Schlüsselwörterwrought aluminum alloy, EN AW-2024, casting with crystallization under pressure, mechanical properties

© 2017 Branislav Vanko et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Schlüsselwörter
wrought aluminum alloy, EN AW-2024, casting with crystallization under pressure, mechanical properties