<abstract xmlns="http://www.w3.org/1999/xhtml"> In a batch electro-electrodialysis (EED), sodium sulphate solution with an initial concentration of 80.90 g/dm3 was converted to obtain solutions of sodium hydroxide (13.96%) and sulphuric acid (10.15%) and a dialysate (3.23 g/dm3 of sulphate ions). Changes in the EED process′ performance (temperature, cell voltage, concentrations, energy consumption) with an increasing conversion degree of salt are presented. Based on the presented results of the batch experiment, conditions necessary to run the process continuously are discussed. A single pass method is inapplicable due to excessive heating of the electro-electrodialyser. A cascade method enables interstage cooling of the solutions, providing temperatures suitable for ion-exchange membranes to work. Increasing the number of stages in the cascade reduces both the number of electro-electrodialysers and specific electric energy consumption, providing the same production capacity. However, this increases the investment cost.</abstract>

In a batch electro-electrodialysis (EED), sodium sulphate solution with an initial concentration of 80.90 g/dm3 was converted to obtain solutions of sodium hydroxide (13.96%) and sulphuric acid (10.15%) and a dialysate (3.23 g/dm3 of sulphate ions). Changes in the EED process′ performance (temperature, cell voltage, concentrations, energy consumption) with an increasing conversion degree of salt are presented. Based on the presented results of the batch experiment, conditions necessary to run the process continuously are discussed. A single pass method is inapplicable due to excessive heating of the electro-electrodialyser. A cascade method enables interstage cooling of the solutions, providing temperatures suitable for ion-exchange membranes to work. Increasing the number of stages in the cascade reduces both the number of electro-electrodialysers and specific electric energy consumption, providing the same production capacity. However, this increases the investment cost.

Processing of sodium sulphate solutions using the EED method: from a batch toward a continuous process

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

In a batch electro-electrodialysis (EED), sodium sulphate solution with an initial concentration of 80.90 g/dm3 was converted to obtain solutions of sodium...

Processing of sodium sulphate solutions using the EED method: from a batch toward a continuous process

Online veröffentlicht: 11. Mai 2017

Seitenbereich: 54 - 58

DOI: https://doi.org/10.1515/pjct-2017-0008

Schlüsselwörter
electro-electrodialysis, waste processing, process conditions

© by Hanna Jaroszek

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Processing of sodium sulphate solutions using the EED method: from a batch toward a continuous process

Online veröffentlicht: 11. Mai 2017

Seitenbereich: 54 - 58

DOI: https://doi.org/10.1515/pjct-2017-0008

Schlüsselwörterelectro-electrodialysis, waste processing, process conditions

© by Hanna Jaroszek

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
electro-electrodialysis, waste processing, process conditions