[1. Świderski, W. (2003). Lock-in thermography to rapid evaluation of destruction area in composite materials used in military applications. Proc. SPIE 5132, Sixth International Conference on Quality Control by Artificial Vision, 506. DOI: 10.1117/12.515159.10.1117/12.515159]Search in Google Scholar
[2. Kaduna, A. & Gnatowski, A. (2012). Influence of heating rate on evolution of dynamic properties of polymeric laminates. Plast. Rubber Compos. 41(6), 233–239. dx.doi.org/10.1179/1743289811Y.0000000037.10.1179/1743289811Y.0000000037]Search in Google Scholar
[3. Avdelidis, N.P., Hawtin, B.C. & Almond, D.P. (2003). Transient thermography in the assessment of defects of aircraft composites. NDT and E Int. Vol. 36, 433–439. dx.doi.org/10.1016/S0963-8695(03)00052-5.10.1016/S0963-8695(03)00052-5]Search in Google Scholar
[4. Avdelidis, N.P., Ibarra-Castanedo, C., Maldague, X., Marioli-Riga, Z.P. & Almond, D.P. (2004). A thermographic comparison study for the assessment of composite patches. Infrared Phys. Technol. Vol. 45, 291–299. DOI: 10.1117/12.771082.10.1117/12.771082]Search in Google Scholar
[5. Bates, D., Smith, G., Lu, D. & Hewitt, J. (2000). Rapid thermal non-destructive testing of aircraft components. Composites: Part B Vol. 31, 175–185. DOI: 10.1016/S1359-8368(00)00005-6.10.1016/S1359-8368(00)00005-6]Search in Google Scholar
[6. Maldague, X.P.V. (2007). Non-destructive evaluation of materials by infrared thermography. London. United Kingdom. Springer-Verlag.]Search in Google Scholar
[7. Ruddock, R.W. (2013). Basic infrared thermography principles. USA: Reliabilityweb.com]Search in Google Scholar
[8. Vollmer, M. & Mollmann, K.P. (2010). Infrared Thermal imaging. Fundamentals, Research and Application. Weinheim, Germany: Wiley-VCH Verlag GmbH&Co.10.1002/9783527630868]Search in Google Scholar
[9. Rojek, M., Szymiczek, M. & Wróbel, G. (2011). Nondestructive methods of research on polymer materials. Plastic Process. 6(144), 507–510 (in Polish).]Search in Google Scholar
[10. Martin, R. (2008). Ageing of composites, Cambridge, England: Woodhead Publishing Limited.]Search in Google Scholar
[11. Bogdan-Włodek, A., Kozioł, M. & Myalski, J. (April, 2012). Influence of surface treatment on the wetting process of jute fibres with thermosetting polyester resin. Pol. J. Chem. Technol. 14(1), 21–27. DOI: 10.2478/v10026-012-0054-9.10.2478/v10026-012-0054-9]Search in Google Scholar
[12. Landowski, M., Budzik, M. & Imielińska, K. (March, 2011). On degradation of glass/polyester laminate immersed in water. Adv. Mater. Sci. 11(1), 35–39. DOI: 10.2478/v10077-011-004-x.]Search in Google Scholar
[13. Harris, B. (2003). Fatigue in composites, Cambridge, England: Woodhead Publishing Limited.]Search in Google Scholar
[14. Rojek, M. (2011). Methodology of diagnostics research of layered composite materials with polymer warp. Gliwice, Poland: International OCSCO World Press (in Polish).]Search in Google Scholar
[15. Błażejewski, W. (2009). Methodology of selection of the structure of composite braid carriers with reference to containers made by the winding method. Tech. Trans. Mech. 1-M, 9–14. (in Polish).]Search in Google Scholar
[16. Cohen, D. (1997, July). Influence of filament winding parameters on composite vessel quality and strength. Comp.: Part A, 28A, 1035–1047. DOI: 10.1016/S1359-835X(97)00073-0.10.1016/S1359-835X(97)00073-0]Search in Google Scholar
[17. Szymiczek, M., Rojek, M. & Wróbel, G. (2011). Test of composite pipe in the aspect of diagnostic of aging – fatigue changes. Proc. Int. Sem. Sci. Educ. 16–23 April 2011 (61–63). Rome, Italy.]Search in Google Scholar
[18. Stabik, J., Szymiczek, M., Wróbel, G. & Rojek, M. (2012). New stand for composite pipes testing. Proceedings of X International Conference of the Quality. Reliability and Long Usage of Technical Systems and Technological Processes. 20–27 November 2012 (63–66). Eilat, Israel.]Search in Google Scholar
[19. Standards Association of Poland. (2002). Poland standard: Advanced technical ceramics – Monolithic ceramics – Thermo-physical properties – Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method. PN-EN 821-2:2002.]Search in Google Scholar
[20. N501 029 32/2474 – Non-destructive method of assessment concerning the degree of thermal and fatigue degradation of construction polymer composites.]Search in Google Scholar
[21. Standards Association of Poland. (1993). Poland standard: Plastics – Determination of flexural properties. PN-EN ISO 178–1993.]Search in Google Scholar