<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Magnetic resonance imaging (MRI) is a very popular tool for diagnostic applications and research studies. Low-field MR scanners, usually with an open design, are suitable for claustrophobic and obese patients, as well as for children, who may be fearful in closed MR scanners. However, these types of scanners provide lower spatial resolution and a lower signal-to-noise ratio (SNR) if compared with the same examination performed at the same time at high field scanners. It is dominantly caused by the low field strength and other factors, such as radiofrequency noise. Therefore, a long measurement time is usually necessary. This research paper is focused on the development of novel probes and preamplifiers for low-field MR scanners to improve SNR, and thus, shorten the measurement time. In this study, we describe the design of a high impedance preamplifier and a high temperature superconductor (HTS) coil. This novel instrumentation was compared with uncooled and cooled copper coils. Improvement in SNR in the case of an HTS coil is reported.</p></abstract>

Magnetic resonance imaging (MRI) is a very popular tool for diagnostic applications and research studies. Low-field MR scanners, usually with an open design, are suitable for claustrophobic and obese patients, as well as for children, who may be fearful in closed MR scanners. However, these types of scanners provide lower spatial resolution and a lower signal-to-noise ratio (SNR) if compared with the same examination performed at the same time at high field scanners. It is dominantly caused by the low field strength and other factors, such as radiofrequency noise. Therefore, a long measurement time is usually necessary. This research paper is focused on the development of novel probes and preamplifiers for low-field MR scanners to improve SNR, and thus, shorten the measurement time. In this study, we describe the design of a high impedance preamplifier and a high temperature superconductor (HTS) coil. This novel instrumentation was compared with uncooled and cooled copper coils. Improvement in SNR in the case of an HTS coil is reported.

Design and Construction of Novel Instrumentation for Low-Field MR Tomography

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Design and Construction of Novel Instrumentation for Low-Field MR Tomography"}

Magnetic resonance imaging (MRI) is a very popular tool for diagnostic applications and research studies. Low-field MR scanners, usually with an open design,...

Design and Construction of Novel Instrumentation for Low-Field MR Tomography

Online veröffentlicht: 12. Juni 2018

Seitenbereich: 107 - 112

Eingereicht: 16. Jan. 2018

Akzeptiert: 25. Apr. 2018

DOI: https://doi.org/10.1515/msr-2018-0016

Schlüsselwörter
Imaging, MRI, low-field tomography, signal-to-noise ratio (SNR), probe, coils, preamplifiers

© 2018 Daniel Gogola, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Design and Construction of Novel Instrumentation for Low-Field MR Tomography

Online veröffentlicht: 12. Juni 2018

Seitenbereich: 107 - 112

Eingereicht: 16. Jan. 2018

Akzeptiert: 25. Apr. 2018

DOI: https://doi.org/10.1515/msr-2018-0016

SchlüsselwörterImaging, MRI, low-field tomography, signal-to-noise ratio (SNR), probe, coils, preamplifiers

© 2018 Daniel Gogola, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
Imaging, MRI, low-field tomography, signal-to-noise ratio (SNR), probe, coils, preamplifiers