<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The specific features of the measuring instruments verification based on the results of their calibration are considered. It is noted that, in contrast to the verification procedure used in the legal metrology, the verification procedure for calibrated measuring instruments has to take into account the uncertainty of measurements into account. In this regard, a large number of measuring instruments, considered as those that are in compliance after verification in the legal metrology, turns out to be not in compliance after calibration. In this case, it is necessary to evaluate the probability of compliance of indicating measuring instruments. The procedure of compliance probability determination on the basis of the Monte Carlo method is considered. An example of calibration of a Vernier caliper is given.</p></abstract>

The specific features of the measuring instruments verification based on the results of their calibration are considered. It is noted that, in contrast to the verification procedure used in the legal metrology, the verification procedure for calibrated measuring instruments has to take into account the uncertainty of measurements into account. In this regard, a large number of measuring instruments, considered as those that are in compliance after verification in the legal metrology, turns out to be not in compliance after calibration. In this case, it is necessary to evaluate the probability of compliance of indicating measuring instruments. The procedure of compliance probability determination on the basis of the Monte Carlo method is considered. An example of calibration of a Vernier caliper is given.

Verification of the Indicating Measuring Instruments Taking into Account their Instrumental Measurement Uncertainty

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The specific features of the measuring instruments verification based on the results of their calibration are considered. It is noted that, in contrast to the...

Verification of the Indicating Measuring Instruments Taking into Account their Instrumental Measurement Uncertainty

Online veröffentlicht: 22. Nov. 2017

Seitenbereich: 269 - 272

Eingereicht: 09. Sept. 2017

Akzeptiert: 13. Nov. 2017

DOI: https://doi.org/10.1515/msr-2017-0033

Schlüsselwörter
Probability of compliance, uncertainty of measurement, calibration, verification, uncertainty budget, maximum permissible error

© by Igor Zakharov

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Verification of the Indicating Measuring Instruments Taking into Account their Instrumental Measurement Uncertainty

Online veröffentlicht: 22. Nov. 2017

Seitenbereich: 269 - 272

Eingereicht: 09. Sept. 2017

Akzeptiert: 13. Nov. 2017

DOI: https://doi.org/10.1515/msr-2017-0033

SchlüsselwörterProbability of compliance, uncertainty of measurement, calibration, verification, uncertainty budget, maximum permissible error

© by Igor Zakharov

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
Probability of compliance, uncertainty of measurement, calibration, verification, uncertainty budget, maximum permissible error