<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Potential drop techniques are of two types: the direct current potential drop (DCPD) technique and alternating current potential drop (ACPD) technique, and both of them are used in nondestructive testing. ACPD, as a kind of valid method in sizing metal cracks, has been applied to evaluate metal structures. However, our review of most available approaches revealed that some improvements can be done in measuring depth of metal bottom crack by means of ACPD, such as accuracy and sensitivity of shallow crack. This paper studied a novel method which utilized the slope of voltage ratio-frequency curve to solve bottom crack depth by using a simple mathematic equation based on finite element analysis. It is found that voltage ratio varies linearly with frequency in the range of 5-15 Hz; this range is slightly higher than the equivalent frequency and lower than semi-permeable frequency. Simulation and experiment show that the novel method can measure the bottom crack depth accurately.</p></abstract>

Potential drop techniques are of two types: the direct current potential drop (DCPD) technique and alternating current potential drop (ACPD) technique, and both of them are used in nondestructive testing. ACPD, as a kind of valid method in sizing metal cracks, has been applied to evaluate metal structures. However, our review of most available approaches revealed that some improvements can be done in measuring depth of metal bottom crack by means of ACPD, such as accuracy and sensitivity of shallow crack. This paper studied a novel method which utilized the slope of voltage ratio-frequency curve to solve bottom crack depth by using a simple mathematic equation based on finite element analysis. It is found that voltage ratio varies linearly with frequency in the range of 5-15 Hz; this range is slightly higher than the equivalent frequency and lower than semi-permeable frequency. Simulation and experiment show that the novel method can measure the bottom crack depth accurately.

Novel Method for Sizing Metallic Bottom Crack Depth Using Multi-frequency Alternating Current Potential Drop Technique

School of Manufacturing, Science and Engineering, Sichuan University, Chengdu, Sichuan province, 610065, P. R. China

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Potential drop techniques are of two types: the direct current potential drop (DCPD) technique and alternating current potential drop (ACPD) technique, and...

Novel Method for Sizing Metallic Bottom Crack Depth Using Multi-frequency Alternating Current Potential Drop Technique

Online veröffentlicht: 29. Okt. 2015

Seitenbereich: 268 - 268

Eingereicht: 10. Juni 2015

Akzeptiert: 07. Okt. 2015

DOI: https://doi.org/10.1515/msr-2015-0037

Schlüsselwörter
Nondestructive testing, alternating current potential drop technique, bottom crack, depth measurement

© by Yuting Li

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Novel Method for Sizing Metallic Bottom Crack Depth Using Multi-frequency Alternating Current Potential Drop Technique

Online veröffentlicht: 29. Okt. 2015

Seitenbereich: 268 - 268

Eingereicht: 10. Juni 2015

Akzeptiert: 07. Okt. 2015

DOI: https://doi.org/10.1515/msr-2015-0037

SchlüsselwörterNondestructive testing, alternating current potential drop technique, bottom crack, depth measurement

© by Yuting Li

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
Nondestructive testing, alternating current potential drop technique, bottom crack, depth measurement