<abstract xmlns="http://www.w3.org/1999/xhtml"> Chitosan has been successfully incorporated as a filler in a polyethylene oxide (PEO) and lithium trifluoromethanesulfonate (LiCF3SO3) matrix with a combination of plasticizers, namely 1,3-dioxolane (DIOX) and tetraethylene glycol dimethylether (TEGDME). The composite gel-polymer electrolyte (CGPE) membranes were prepared by solution casting technique in an argon atmosphere. The prepared membranes were subjected to SEM, TG/DTA and FT-IR analyses. A Li/CGPE/Li symmetric cell was assembled and the variation of interfacial resistance was measured as a function of time. The lithium transference number (Li+t) was measured and the value was calculated as 0.6 which is sufficient for battery applications. The electrochemical stability window of the sample was studied by linear sweep voltammetry and the polymer electrolyte was found to be stable up to 5.2 V.</abstract>

Chitosan has been successfully incorporated as a filler in a polyethylene oxide (PEO) and lithium trifluoromethanesulfonate (LiCF3SO3) matrix with a combination of plasticizers, namely 1,3-dioxolane (DIOX) and tetraethylene glycol dimethylether (TEGDME). The composite gel-polymer electrolyte (CGPE) membranes were prepared by solution casting technique in an argon atmosphere. The prepared membranes were subjected to SEM, TG/DTA and FT-IR analyses. A Li/CGPE/Li symmetric cell was assembled and the variation of interfacial resistance was measured as a function of time. The lithium transference number (Li+t) was measured and the value was calculated as 0.6 which is sufficient for battery applications. The electrochemical stability window of the sample was studied by linear sweep voltammetry and the polymer electrolyte was found to be stable up to 5.2 V.

Preparation and characterization of PEO-based composite gel-polymer electrolytes complexed with lithium trifluoro methane sulfonate

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Chitosan has been successfully incorporated as a filler in a polyethylene oxide (PEO) and lithium trifluoromethanesulfonate (LiCF3SO3) matrix with a...

Preparation and characterization of PEO-based composite gel-polymer electrolytes complexed with lithium trifluoro methane sulfonate

Online veröffentlicht: 25. Juni 2018

Seitenbereich: 185 - 192

Eingereicht: 22. Juni 2016

Akzeptiert: 15. Feb. 2018

DOI: https://doi.org/10.1515/msp-2018-0025

Schlüsselwörter
polyethylene oxide, ionic conductivity, FT-IR, transport number, interfacial properties

© 2018 A.J. Nagajothi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Preparation and characterization of PEO-based composite gel-polymer electrolytes complexed with lithium trifluoro methane sulfonate

Online veröffentlicht: 25. Juni 2018

Seitenbereich: 185 - 192

Eingereicht: 22. Juni 2016

Akzeptiert: 15. Feb. 2018

DOI: https://doi.org/10.1515/msp-2018-0025

Schlüsselwörterpolyethylene oxide, ionic conductivity, FT-IR, transport number, interfacial properties

© 2018 A.J. Nagajothi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
polyethylene oxide, ionic conductivity, FT-IR, transport number, interfacial properties