<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Zinc oxide thin films with different thicknesses were prepared on microscopic glass slides by sol-gel spin coating method, then hydrothermal process was applied to produce zinc oxide nanorod arrays. The nanorod thin films were characterized by various spectroscopic methods of analysis. From the images of field emission scanning electron microscope (FESEM), it was observed that for the film thickness up to 200 nm the formed nanorods with wurtzite hexagonal structure were uniformly distributed over the entire surface substrate. From X-ray diffraction analysis it was revealed that the thin films had good polycrystalline nature with highly preferred c-axis orientation along (0 0 2) plane. The optical characterization done by UV-Vis spectrometer showed that all the films had high transparency of 83 % to 96 % in the visible region and sharp cut off at ultraviolet region of electromagnetic spectrum. The band gap of the films decreased as their thickness increased. Energy dispersive X-ray spectroscopy (EDS) showed the presence of zinc and oxygen elements in the films and Fourier transform infrared spectroscopy (FT-IR) revealed the chemical composition of ZnO in the film.</p></abstract>

Zinc oxide thin films with different thicknesses were prepared on microscopic glass slides by sol-gel spin coating method, then hydrothermal process was applied to produce zinc oxide nanorod arrays. The nanorod thin films were characterized by various spectroscopic methods of analysis. From the images of field emission scanning electron microscope (FESEM), it was observed that for the film thickness up to 200 nm the formed nanorods with wurtzite hexagonal structure were uniformly distributed over the entire surface substrate. From X-ray diffraction analysis it was revealed that the thin films had good polycrystalline nature with highly preferred c-axis orientation along (0 0 2) plane. The optical characterization done by UV-Vis spectrometer showed that all the films had high transparency of 83 % to 96 % in the visible region and sharp cut off at ultraviolet region of electromagnetic spectrum. The band gap of the films decreased as their thickness increased. Energy dispersive X-ray spectroscopy (EDS) showed the presence of zinc and oxygen elements in the films and Fourier transform infrared spectroscopy (FT-IR) revealed the chemical composition of ZnO in the film.

Preparation and spectroscopic analysis of zinc oxide nanorod thin films of different thicknesses

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Zinc oxide thin films with different thicknesses were prepared on microscopic glass slides by sol-gel spin coating method, then hydrothermal process was...

Preparation and spectroscopic analysis of zinc oxide nanorod thin films of different thicknesses

Online veröffentlicht: 31. Okt. 2017

Seitenbereich: 501 - 510

Eingereicht: 19. Okt. 2016

Akzeptiert: 13. Aug. 2017

DOI: https://doi.org/10.1515/msp-2017-0066

Schlüsselwörter
ZnO nanorod, ZnO thin film, sol-gel, hydrothermal growth, thickness effect

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Preparation and spectroscopic analysis of zinc oxide nanorod thin films of different thicknesses

Online veröffentlicht: 31. Okt. 2017

Seitenbereich: 501 - 510

Eingereicht: 19. Okt. 2016

Akzeptiert: 13. Aug. 2017

DOI: https://doi.org/10.1515/msp-2017-0066

SchlüsselwörterZnO nanorod, ZnO thin film, sol-gel, hydrothermal growth, thickness effect

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
ZnO nanorod, ZnO thin film, sol-gel, hydrothermal growth, thickness effect