<abstract xmlns="http://www.w3.org/1999/xhtml">The mechanisms of thermal decomposition of evaporated material during Physical Vapor Deposition (PVD) process depend on the kind of evaporated material. Such parameters of PVD process as deposition rate, source temperature and deposition time should be carefully selected taking into account the properties of material. Deposited films can span the range of chemical compositions based on the source materials. The nanostructural carbon films in form of palladium nanograins embedded in various carbonaceous matrixes were obtained by thermal evaporation during PVD process from two separated sources containing C60 fullerite and palladium acetate, both in a form of powder. The evaporation was realized by resistive heating of sources under a dynamic vacuum of 10-3 Pa. The influence of decomposition path of evaporated materials on the film structure has been discussed. Prepared C-Pd films were characterized using thermo-gravimetric method, differential thermal analysis, infrared spectroscopy and X-ray diffraction. The influence of decomposition of Pd acetate and fullerite on the final film structure was also shown. </abstract>

The mechanisms of thermal decomposition of evaporated material during Physical Vapor Deposition (PVD) process depend on the kind of evaporated material. Such parameters of PVD process as deposition rate, source temperature and deposition time should be carefully selected taking into account the properties of material. Deposited films can span the range of chemical compositions based on the source materials. The nanostructural carbon films in form of palladium nanograins embedded in various carbonaceous matrixes were obtained by thermal evaporation during PVD process from two separated sources containing C60 fullerite and palladium acetate, both in a form of powder. The evaporation was realized by resistive heating of sources under a dynamic vacuum of 10-3 Pa. The influence of decomposition path of evaporated materials on the film structure has been discussed. Prepared C-Pd films were characterized using thermo-gravimetric method, differential thermal analysis, infrared spectroscopy and X-ray diffraction. The influence of decomposition of Pd acetate and fullerite on the final film structure was also shown.

Decomposition of palladium acetate and C60 fullerite during thermal evaporation in PVD process

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Decomposition of palladium acetate and C fullerite during thermal evaporation in PVD process

The mechanisms of thermal decomposition of evaporated material during Physical Vapor Deposition (PVD) process depend on the kind of evaporated material. Such...

Decomposition of palladium acetate and C₆₀ fullerite during thermal evaporation in PVD process

Online veröffentlicht: 31. Okt. 2017

Seitenbereich: 594 - 600

Eingereicht: 09. Jan. 2017

Akzeptiert: 27. Apr. 2017

DOI: https://doi.org/10.1515/msp-2017-0055

Schlüsselwörter
palladium acetate, fullerite, PVD, TGA

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Decomposition of palladium acetate and C60 fullerite during thermal evaporation in PVD process

Online veröffentlicht: 31. Okt. 2017

Seitenbereich: 594 - 600

Eingereicht: 09. Jan. 2017

Akzeptiert: 27. Apr. 2017

DOI: https://doi.org/10.1515/msp-2017-0055

Schlüsselwörterpalladium acetate, fullerite, PVD, TGA

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Decomposition of palladium acetate and C₆₀ fullerite during thermal evaporation in PVD process

Schlüsselwörter
palladium acetate, fullerite, PVD, TGA