This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Fig 1
Thickness vs. etching time of PS grown at a constant current density of 100 mA ·cm−2 on a polished p+ substrate.
Fig 2
Cross-section SEM image of Si/PS structure obtained during 1.3 s at current density of 100 mA/cm2 on p+ substrate (a), planar view of the fabricated porous silicon layer (b).
Fig 3
Experimental total reflectivity spectra for Si/PS and Si/Al.
Fig 4
Cross-section SEM image of PS/SiNx structure carried out on p+ substrate.
Fig 5
Experimental total reflectivity spectra for Si/PS and Si/PS/SiNx structures compared to Si/AlBSF contact.
Fig 6
Optical model of a cell describing the two internal reflections (RB and RF) and the total measured reflection (RT).
Fig 7
Internal reflectivity spectra calculated from R Tfor Si/PS, Si/PS/SiNx structures in comparison with the Si/Al reference.
Fig 8
Total and internal reflectivity at 1130 nm (a), path-length enhancement factor (b), for Si/PS, Si/PS/SiNx and Si/Al.
Weighted average reflectivity calculated from the measured total reflectivity in the wavelength range between 800 and 1200 nm, for various thicknesses of PS layers.