<abstract xmlns="http://www.w3.org/1999/xhtml">The article presents a comparative study between the simplified method calculation proposed by the prescriptions of design codes and the analysis with the FEM program LUSAS [1], regarding the influence of the curvature of the track axis at railway bridges with steel beams embedded in concrete.The study was made on three simply supported bridges with the openings chosen so as to cover the openings used for this constructive solution, namely 10m ≤L≤30m. For each analysed opening the curve radius of the track axis was varied, in the domain in which are representative as effects, namely 100<italic>m</italic> ≤<italic>R</italic>≤1500<italic>m</italic>. In the case of Lusas FEM analysis, a physically nonlinear analysis it was previously carried out, after which the cracked concrete was removed, as its participation in the structural stiffness is practically non-existent.Studying the outcomes revealed by the two calculations presented, it can be concluded that the simplified method proposed by the design codes leads to a overvaluation of the track axis curvature influence at the railway filler-beam deck bridges.</abstract>

The article presents a comparative study between the simplified method calculation proposed by the prescriptions of design codes and the analysis with the FEM program LUSAS [1], regarding the influence of the curvature of the track axis at railway bridges with steel beams embedded in concrete.The study was made on three simply supported bridges with the openings chosen so as to cover the openings used for this constructive solution, namely 10m ≤L≤30m. For each analysed opening the curve radius of the track axis was varied, in the domain in which are representative as effects, namely 100m ≤R≤1500m. In the case of Lusas FEM analysis, a physically nonlinear analysis it was previously carried out, after which the cracked concrete was removed, as its participation in the structural stiffness is practically non-existent.Studying the outcomes revealed by the two calculations presented, it can be concluded that the simplified method proposed by the design codes leads to a overvaluation of the track axis curvature influence at the railway filler-beam deck bridges.

The Influence of the Track Axis Curvature at Railway Filler-Beam Deck Bridges

Assistant Professor, Technical University of Civil Engineering, Faculty of Railways, Roads and Bridges

Modelling in Civil Environmental Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"The Influence of the Track Axis Curvature at Railway Filler-Beam Deck Bridges"}

The article presents a comparative study between the simplified method calculation proposed by the prescriptions of design codes and the analysis with the FEM...

The Influence of the Track Axis Curvature at Railway Filler-Beam Deck Bridges

Online veröffentlicht: 29. Juni 2016

Seitenbereich: 27 - 37

DOI: https://doi.org/10.1515/mmce-2016-0008

Schlüsselwörter
simplified method, 3D modelling, nonlinear analysis, multi-cracked concrete

© 2016 Răzvan Marian Stănescu, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Influence of the Track Axis Curvature at Railway Filler-Beam Deck Bridges

Online veröffentlicht: 29. Juni 2016

Seitenbereich: 27 - 37

DOI: https://doi.org/10.1515/mmce-2016-0008

Schlüsselwörtersimplified method, 3D modelling, nonlinear analysis, multi-cracked concrete

© 2016 Răzvan Marian Stănescu, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
simplified method, 3D modelling, nonlinear analysis, multi-cracked concrete