<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In the rivers of Latvia and of many other countries the flow velocity in the places that are most suitable for installation of hydrokinetic devices is 0.4 to 0.9 m/s. In a stream or a river the hydrokinetic devices can reach full efficiency starting from about twice higher flow velocities. It is advisable to at least double this velocity thus increasing the efficiency and power output of the hydrokinetic devices installed in such places. Since Latvia has abundance of slow rivers and almost none are fast, research in this field is of high importance. Diversified technical methods are known that allow increasing substantially the efficiency of hydrokinetic devices. These methods include the use of diffusers, concentrators, different types of other channelling devices and means of flow control. Desirable effects are achieved through changing the cross-section and/or direction of a flow, its pressure, minimizing the turbulence, etc. This work substantiates the use of such devices for increasing the efficiency of hydrokinetic devices. A method is proposed for evaluation of the effects on power output gained owing to the use of channelling devices. Results show that the efficiency of hydrokinetic devices can be increased by at least 110%.</p></abstract>

In the rivers of Latvia and of many other countries the flow velocity in the places that are most suitable for installation of hydrokinetic devices is 0.4 to 0.9 m/s. In a stream or a river the hydrokinetic devices can reach full efficiency starting from about twice higher flow velocities. It is advisable to at least double this velocity thus increasing the efficiency and power output of the hydrokinetic devices installed in such places. Since Latvia has abundance of slow rivers and almost none are fast, research in this field is of high importance. Diversified technical methods are known that allow increasing substantially the efficiency of hydrokinetic devices. These methods include the use of diffusers, concentrators, different types of other channelling devices and means of flow control. Desirable effects are achieved through changing the cross-section and/or direction of a flow, its pressure, minimizing the turbulence, etc. This work substantiates the use of such devices for increasing the efficiency of hydrokinetic devices. A method is proposed for evaluation of the effects on power output gained owing to the use of channelling devices. Results show that the efficiency of hydrokinetic devices can be increased by at least 110%.

Effects of Using Channelling Devices to Increase Efficiency of Hydrokinetic Devices

Riga Technical University, 1 Kaļķu Str., LV–1658, Riga, LATVIA

Institute of Physical Energetics 21 Aizkraukles Str., LV-1006, Riga, LATVIA

LLC „Environment, Bioenergetics and Biotechnology Competence Centre” 21 Aizkraukles Str., LV-1006, Riga, LATVIA

Latvian Journal of Physics and Technical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In the rivers of Latvia and of many other countries the flow velocity in the places that are most suitable for installation of hydrokinetic devices is 0.4 to...

Effects of Using Channelling Devices to Increase Efficiency of Hydrokinetic Devices

Online veröffentlicht: 22. Mai 2015

Seitenbereich: 3 - 12

DOI: https://doi.org/10.1515/lpts-2015-0007

© by A. Kalnacs

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.