<abstract xmlns="http://www.w3.org/1999/xhtml"><p>To begin with, the intorduction of this paper summarises literature sources that wrongly interpret results of the bond strength between hot-dip galvanised reinforcements and concrete. The influence of the total reinforcement anchorage length on the bond strength results assessment was studied in detail. The numeric analysis of beam models with various testing anchorage lengths (the analysis input data comprised the results of previous bond strength tests carried out in a laboratory) unambiguously confirmed that when the bond strength between concrete and hot-dip galvanised reinforcement with a sufficient test anchorage length is tested in a beam test, the negative impact of the coating corrosion on bond strength with concrete may be biased. It is more objective to test bond strength with concrete in a pull-out test where a very short test reinforcement anchorage length is set out as a standard.</p></abstract>

To begin with, the intorduction of this paper summarises literature sources that wrongly interpret results of the bond strength between hot-dip galvanised reinforcements and concrete. The influence of the total reinforcement anchorage length on the bond strength results assessment was studied in detail. The numeric analysis of beam models with various testing anchorage lengths (the analysis input data comprised the results of previous bond strength tests carried out in a laboratory) unambiguously confirmed that when the bond strength between concrete and hot-dip galvanised reinforcement with a sufficient test anchorage length is tested in a beam test, the negative impact of the coating corrosion on bond strength with concrete may be biased. It is more objective to test bond strength with concrete in a pull-out test where a very short test reinforcement anchorage length is set out as a standard.

The influence of total reinforcement anchorage length on misinterpretation of the impact of hot-dip galvanised steel corrosion on its bond strength with concrete

KOM – Corrosion and Material Protection Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

To begin with, the intorduction of this paper summarises literature sources that wrongly interpret results of the bond strength between hot-dip galvanised...

The influence of total reinforcement anchorage length on misinterpretation of the impact of hot-dip galvanised steel corrosion on its bond strength with concrete

Online veröffentlicht: 19. März 2016

Seitenbereich: 13 - 20

DOI: https://doi.org/10.1515/kom-2016-0003

© 2016 Pokorný P. et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.