<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In the previous work [<xref ref-type="bibr" rid="j_fas-2016-0007_ref_001_w2aab2b8b8b1b7b1ab1ab1Aa">1</xref>] it was shown that strain hardening had considerable impact on the hardness of Inconel 718. In order to verify the weakening of the material associated with the damage mechanism in the tested material, the hardness tests were performed on the stretched specimen which was subsequently heat treated. The tests revealed that, after heat treatment, the measured hardness was reduced with an increasing degree of the plastic deformation present prior to heat treatment.</p></abstract>

In the previous work [1] it was shown that strain hardening had considerable impact on the hardness of Inconel 718. In order to verify the weakening of the material associated with the damage mechanism in the tested material, the hardness tests were performed on the stretched specimen which was subsequently heat treated. The tests revealed that, after heat treatment, the measured hardness was reduced with an increasing degree of the plastic deformation present prior to heat treatment.

The Impact of Damage in Anneling Inconel 718 on Hardness Measured by the Vickers Method

Fatigue of Aircraft Structures

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In the previous work [1] it was shown that strain hardening had considerable impact on the hardness of Inconel 718. In order to verify the weakening of the...

The Impact of Damage in Anneling Inconel 718 on Hardness Measured by the Vickers Method

Online veröffentlicht: 22. Juli 2017

Seitenbereich: 92 - 96

DOI: https://doi.org/10.1515/fas-2016-0007

Schlüsselwörter
Damage parameter, Vickers hardness, Inconel 718, Tensile test, Heat treatment

© 2016 Maciej Malicki et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Impact of Damage in Anneling Inconel 718 on Hardness Measured by the Vickers Method

Online veröffentlicht: 22. Juli 2017

Seitenbereich: 92 - 96

DOI: https://doi.org/10.1515/fas-2016-0007

SchlüsselwörterDamage parameter, Vickers hardness, Inconel 718, Tensile test, Heat treatment

© 2016 Maciej Malicki et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Damage parameter, Vickers hardness, Inconel 718, Tensile test, Heat treatment