<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Precision measurements of friction processes have a key role in a variety of industrial processes. The emergence of fine electronic circuit techniques greatly expands capabilities of control. There are some difficulties for their full implementation today, especially when it regards the accuracy and frequency of measurements. The motion-measuring method in real-time system is considered in this article, paying special attention to increased accuracy. This method is based on rapid analog digital converter (ADC), transmission program and digital signal processor (DSP) algorithms. Description of laboratory devices is included: Tribal-T and universal friction machine (MTU-01) designed for “Pin on disc” tests. Great emphasis is placed on the usability of accelerometers. The present study examined the collected data via laboratory system for data acquisition and control, and processing it in the laboratory of Biotribology. Laboratory supervisory control and data acquisition (SCADA) algorithms is described below. Task of regulation is not considered. This paper describes only methods of automatic control theory to analyze the frictional quality.</p></abstract>

Precision measurements of friction processes have a key role in a variety of industrial processes. The emergence of fine electronic circuit techniques greatly expands capabilities of control. There are some difficulties for their full implementation today, especially when it regards the accuracy and frequency of measurements. The motion-measuring method in real-time system is considered in this article, paying special attention to increased accuracy. This method is based on rapid analog digital converter (ADC), transmission program and digital signal processor (DSP) algorithms. Description of laboratory devices is included: Tribal-T and universal friction machine (MTU-01) designed for “Pin on disc” tests. Great emphasis is placed on the usability of accelerometers. The present study examined the collected data via laboratory system for data acquisition and control, and processing it in the laboratory of Biotribology. Laboratory supervisory control and data acquisition (SCADA) algorithms is described below. Task of regulation is not considered. This paper describes only methods of automatic control theory to analyze the frictional quality.

Measurement Instruments and Software Used in Biotribology Research Laboratory

National Research University of Information Technologies, Mechanics and Optics – ITMO

Electrical, Control and Communication Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Measurement Instruments and Software Used in Biotribology Research Laboratory"}

Precision measurements of friction processes have a key role in a variety of industrial processes. The emergence of fine electronic circuit techniques greatly...

Measurement Instruments and Software Used in Biotribology Research Laboratory

Online veröffentlicht: 24. Juli 2015

Seitenbereich: 30 - 36

DOI: https://doi.org/10.1515/ecce-2015-0004

Schlüsselwörter
Friction, Mixed analog digital integrated circuits, Frequency-domain analysis, Real-time systems, WEB services

© Riga Technical University

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Measurement Instruments and Software Used in Biotribology Research Laboratory

Online veröffentlicht: 24. Juli 2015

Seitenbereich: 30 - 36

DOI: https://doi.org/10.1515/ecce-2015-0004

SchlüsselwörterFriction, Mixed analog digital integrated circuits, Frequency-domain analysis, Real-time systems, WEB services

© Riga Technical University

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Friction, Mixed analog digital integrated circuits, Frequency-domain analysis, Real-time systems, WEB services