<abstract xmlns="http://www.w3.org/1999/xhtml"> The paper reports the results of depositing SiO2 and SiO2-TiO2 coatings on titanium alloy Ti-6Al-4V ELI (ASTM-grade 5). Oxide coatings were deposited onto the titanium alloy substrate by sol-gel method and by electrophoresis. The produced coatings were chemically uniform, compact and highly dense. We then performed SEM microstructure examination, as well as microhardness and surface roughness measurements for different coating combinations. The significance of the results was assessed by the Shapiro-Wilk and t-Student tests using the STATISTICA software. It has been found that there are statistically significant differences in the hardness of SiO2 and SiO2-TiO2 coatings. The results of roughness parameters reveal significant differences only for individual coatings.</abstract>

The paper reports the results of depositing SiO2 and SiO2-TiO2 coatings on titanium alloy Ti-6Al-4V ELI (ASTM-grade 5). Oxide coatings were deposited onto the titanium alloy substrate by sol-gel method and by electrophoresis. The produced coatings were chemically uniform, compact and highly dense. We then performed SEM microstructure examination, as well as microhardness and surface roughness measurements for different coating combinations. The significance of the results was assessed by the Shapiro-Wilk and t-Student tests using the STATISTICA software. It has been found that there are statistically significant differences in the hardness of SiO2 and SiO2-TiO2 coatings. The results of roughness parameters reveal significant differences only for individual coatings.

Production of oxide coatings by sol-gel method and electrophoresis

Current Issues in Pharmacy and Medical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Production of oxide coatings by sol-gel method and electrophoresis"}

The paper reports the results of depositing SiO2 and SiO2-TiO2 coatings on titanium alloy Ti-6Al-4V ELI (ASTM-grade 5). Oxide coatings were deposited onto the...

Production of oxide coatings by sol-gel method and electrophoresis

Online veröffentlicht: 23. Juni 2017

Seitenbereich: 16 - 19

Eingereicht: 15. Aug. 2016

Akzeptiert: 24. Sept. 2016

DOI: https://doi.org/10.1515/cipms-2017-0003

Schlüsselwörter
sol-gel method, electrophoretic deposition (EPD), oxide coatings, titanium alloy

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Production of oxide coatings by sol-gel method and electrophoresis

Online veröffentlicht: 23. Juni 2017

Seitenbereich: 16 - 19

Eingereicht: 15. Aug. 2016

Akzeptiert: 24. Sept. 2016

DOI: https://doi.org/10.1515/cipms-2017-0003

Schlüsselwörtersol-gel method, electrophoretic deposition (EPD), oxide coatings, titanium alloy

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
sol-gel method, electrophoretic deposition (EPD), oxide coatings, titanium alloy