<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In this work, the constitutive model, derived with the use of thermodynamic of irreversible processes framework is presented. The model is derived under the assumption of small strains. Plastic strain induced martensitic phase transformation is considered in the austenitic matrix where the volume fraction of the martensite is reflected by a scalar parameter. The austenitic matrix is assumed as the elastic-plastic material and martensitic phase is assumed as randomly distributed and randomly oriented inclusions. Both phases are affected by damage evolution but there is no distinction in the model between damage in austenite and martensite.</p></abstract>

In this work, the constitutive model, derived with the use of thermodynamic of irreversible processes framework is presented. The model is derived under the assumption of small strains. Plastic strain induced martensitic phase transformation is considered in the austenitic matrix where the volume fraction of the martensite is reflected by a scalar parameter. The austenitic matrix is assumed as the elastic-plastic material and martensitic phase is assumed as randomly distributed and randomly oriented inclusions. Both phases are affected by damage evolution but there is no distinction in the model between damage in austenite and martensite.

Constitutive Modelling of Damage Evolution and Martensitic Transformation in 316L Stainless Steel

Institute of Applied Mechanics, Faculty of Mechanical Engineering, Cracow University of Technology, Al. Jana Pawla II 37, 31-864 Cracow, Poland

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this work, the constitutive model, derived with the use of thermodynamic of irreversible processes framework is presented. The model is derived under the...

Constitutive Modelling of Damage Evolution and Martensitic Transformation in 316L Stainless Steel

Online veröffentlicht: 08. Juni 2016

Seitenbereich: 125 - 132

Eingereicht: 04. Mai 2015

Akzeptiert: 13. Mai 2016

DOI: https://doi.org/10.1515/ama-2016-0020

Schlüsselwörter
Constitutive Modelling, Dissipative Materials, Phase Transformation, Damage Evolution

© 2016 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Constitutive Modelling of Damage Evolution and Martensitic Transformation in 316L Stainless Steel

Online veröffentlicht: 08. Juni 2016

Seitenbereich: 125 - 132

Eingereicht: 04. Mai 2015

Akzeptiert: 13. Mai 2016

DOI: https://doi.org/10.1515/ama-2016-0020

SchlüsselwörterConstitutive Modelling, Dissipative Materials, Phase Transformation, Damage Evolution

© 2016 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Constitutive Modelling, Dissipative Materials, Phase Transformation, Damage Evolution