<abstract xmlns="http://www.w3.org/1999/xhtml"><p> This paper presents the results of comparative analysis of modeling accuracy the freeform surface constructed by using a variety of algorithms for surface modeling. Also determined the accuracy of mapping the theoretical freeform surface described by mathematical equation. To model surface objects used: SolidWorks 2012, CATIA v5 and Geomagic Studio 12. During the design process of CAD models were used: profile curves, fitting parametric surface and polygonal mesh. To assess the accuracy of the CAD models used Geomagic Qualify 12. On the basis of analyse defined the scope of application of each modeling techniques depending on the nature of the constructed object.</p></abstract>

This paper presents the results of comparative analysis of modeling accuracy the freeform surface constructed by using a variety of algorithms for surface modeling. Also determined the accuracy of mapping the theoretical freeform surface described by mathematical equation. To model surface objects used: SolidWorks 2012, CATIA v5 and Geomagic Studio 12. During the design process of CAD models were used: profile curves, fitting parametric surface and polygonal mesh. To assess the accuracy of the CAD models used Geomagic Qualify 12. On the basis of analyse defined the scope of application of each modeling techniques depending on the nature of the constructed object.

Accuracy Assessment for Cad Modeling of Freeform Surface Described by Equation

Faculty of Mechanical Engineering, Department of Production Engineering, Bialystok University of Technology, ul. Wiejska 45C, 15-351 Białystok, Poland

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Accuracy Assessment for Cad Modeling of Freeform Surface Described by Equation"}

This paper presents the results of comparative analysis of modeling accuracy the freeform surface constructed by using a variety of algorithms for surface...

Accuracy Assessment for Cad Modeling of Freeform Surface Described by Equation

Online veröffentlicht: 14. Aug. 2015

Seitenbereich: 110 - 114

Eingereicht: 14. Juli 2014

Akzeptiert: 22. Juli 2015

DOI: https://doi.org/10.1515/ama-2015-0019

Schlüsselwörter
B-Spline, CAD Model, Cloud of Points, Reverse Engineering, NURBS, Surface Reconstruction, Triangulation

© Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Accuracy Assessment for Cad Modeling of Freeform Surface Described by Equation

Online veröffentlicht: 14. Aug. 2015

Seitenbereich: 110 - 114

Eingereicht: 14. Juli 2014

Akzeptiert: 22. Juli 2015

DOI: https://doi.org/10.1515/ama-2015-0019

SchlüsselwörterB-Spline, CAD Model, Cloud of Points, Reverse Engineering, NURBS, Surface Reconstruction, Triangulation

© Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
B-Spline, CAD Model, Cloud of Points, Reverse Engineering, NURBS, Surface Reconstruction, Triangulation