<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper presents a change in physical properties of loose, dust fodder additives (aluminosilicate) after mixing them with oil or glycerine. Additives where mixed in a blade mixer with the same mixing time for all samples, which was 1 minute. Tests with oil or glycerine were carried out in the following amounts: 5%, 10%. For mixtures of additives with oil or glycerine a selected group of physical properties was determined. Method of determination of physical properties was the same for all samples i.e. the same additives − without oil and glycerine as well as mixtures with their participation. Obtained research results and their analysis unanimously indicate that adding any amount of oil or glycerine for additives improves selected physical properties of mixtures.</p></abstract>

The paper presents a change in physical properties of loose, dust fodder additives (aluminosilicate) after mixing them with oil or glycerine. Additives where mixed in a blade mixer with the same mixing time for all samples, which was 1 minute. Tests with oil or glycerine were carried out in the following amounts: 5%, 10%. For mixtures of additives with oil or glycerine a selected group of physical properties was determined. Method of determination of physical properties was the same for all samples i.e. the same additives − without oil and glycerine as well as mixtures with their participation. Obtained research results and their analysis unanimously indicate that adding any amount of oil or glycerine for additives improves selected physical properties of mixtures.

Evaluation of the Improvement Possibilities of Physical Properties of Mineral Fodder Additives

Department of Engineering and Food Machines

Agricultural Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper presents a change in physical properties of loose, dust fodder additives (aluminosilicate) after mixing them with oil or glycerine. Additives where...

Evaluation of the Improvement Possibilities of Physical Properties of Mineral Fodder Additives

Online veröffentlicht: 04. Okt. 2017

Seitenbereich: 89 - 96

Eingereicht: 01. März 2017

Akzeptiert: 01. Mai 2017

DOI: https://doi.org/10.1515/agriceng-2017-0028

Schlüsselwörter
mixing, physical properties, fodder additives, fodder

© 2017 Paweł Sobczak et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Evaluation of the Improvement Possibilities of Physical Properties of Mineral Fodder Additives

Online veröffentlicht: 04. Okt. 2017

Seitenbereich: 89 - 96

Eingereicht: 01. März 2017

Akzeptiert: 01. Mai 2017

DOI: https://doi.org/10.1515/agriceng-2017-0028

Schlüsselwörtermixing, physical properties, fodder additives, fodder

© 2017 Paweł Sobczak et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
mixing, physical properties, fodder additives, fodder